[quote=“a1adam12, post: 35043, member: 22878”]I have (technically had since I’ve now upgraded) FOG up and running on Fedora 20 without any issues. Took some customizing, but figured it out. I posted a help guide on this thread:

[url]http://fogproject.org/forum/threads/using-0-32-with-fedora-20.10141/[/url]

Hopefully it can help you out.[/quote]

Hello a1adam12,

Thanks for your replied, I was able to pass the error message stated before and able to almost upload an image. The only problem is that when it finish to upload the image FOGFTP failed to connect. I verified TFTP and node have the same username and password as well as the IP.

Thank you

[quote=“Tom Elliott, post: 34544, member: 7271”]If you got an error, how did everything install “just fine”?

I realize it didn’t fall out of the installer, but are you also aware we’ve stopped official support for Fedora specifically because we can’t keep up with all of the change’s?[/quote]

What OS would you suggest?

[quote=“madskillz23, post: 34563, member: 8206”]I’m on CentOS 7 (similar architecture to Fedora 20) and haven’t been able to get image upload working properly yet. Best of luck.[/quote]

Oh well, as you predicted, is not working.

• Mounting File System …mount: mounting 10.##.#.###:/images/dev/ on /images failed: Operation not supported

Any toughs?

[quote=“madskillz23, post: 34557, member: 8206”]Firewall issue. systemctl stop firewalld.service && systemctl disable firewalld.service

That should do it.[/quote]

That did the trick.

I’ll still to test the system, register, upload an image, and deploy unicasts and multicast. I’ll update with the results.

Thanks guys!

[quote=“a1adam12, post: 24115, member: 22878”]I 've gotten somewhere. I thought the firewall was disabled because I was using the old iptables rather than firewalld. So I believe I never had it set up correctly. After a few tweaks, Task Scheduler seems to have successfully connected to TFTP and started the job.

After that it was double checking to make sure some other services, like nfs-server, were properly enabled and started and I’m good to go.[/quote]

Could you elaborate on the other tweaks you performed to make it work. I’m currently having problems were I’m able to access the web interface from the fog server but not from another machine.

Fedora 20
Fog 1.2.0

Ok, so I figured out why I was not able to disable selinux, I was missing a D (disable[B]d[/B]). Now is disabled but I’m still unable to reach the website.
Thasnks

[quote=“Tom Elliott, post: 34551, member: 7271”]Did you reboot?[/quote]

Yes

It is disabled but I still getting an enable status

This file controls the state of SELinux on the system.

SELINUX= can take one of these three values:

enforcing - SELinux security policy is enforced.

permissive - SELinux prints warnings instead of enforcing.

disabled - No SELinux policy is loaded.

SELINUX=disable

SELINUXTYPE= can take one of these two values:

targeted - Targeted processes are protected,

minimum - Modification of targeted policy. Only selected processes are protected.

mls - Multi Level Security protection.

SELINUXTYPE=targeted

I just checked SElinux, Although I’m setting SELINUX=disable in /etc/selinux/config, when I run [I]$ /usr/sbin/sestatus[/I] it says that is enable, any toughs?

[SIZE=6]From /etc/selinux/config folder:[/SIZE]

[I]# This file controls the state of SELinux on the system.[/I]
[I]# SELINUXTYPE= can take one of these two values:[/I]
[I]# targeted - Targeted processes are protected,[/I]
[I]# minimum - Modification of targeted policy. Only selected processes are protected. [/I]
[I]# mls - Multi Level Security protection.[/I]
[I]SELINUXTYPE=targeted[/I]

[SIZE=6][B]From terminal:[/B][/SIZE]

[root@10-21-0-110-ccca-internal Admin]# /usr/sbin/sestatus
SELinux status: enabled
SELinuxfs mount: /sys/fs/selinux
SELinux root directory: /etc/selinux
Loaded policy name: targeted
Current mode: enforcing
Mode from config file: error (Success)
Policy MLS status: enabled
Policy deny_unknown status: allowed
Max kernel policy version: 28
[root@10-21-0-110-ccca-internal Admin]#

It is disable.

Here is the error I gathered during the fog installation:

[I] Press [Enter] key when database is updated/installed.[/I]
[I] * Configuring Fresh Clam…Skipped (See wiki for installation instructions)[/I]
[I] * Setting up storage…OK[/I]
[I] * Setting up and starting NFS Server…Note: Forwarding request to ‘systemctl enable rpcbind.service’.[/I]
[I]Note: Forwarding request to ‘systemctl enable nfs.service’.[/I]
[I]Failed to issue method call: No such file or directory[/I]
[I]OK[/I]
[I] * Setting up and starting DHCP Server…Skipped[/I]
[I] * Setting up and starting TFTP and PXE Servers…Note: Forwarding request to ‘systemctl enable xinetd.service’.[/I]
[I]OK[/I]
[I] * Setting up and starting VSFTP Server…Note: Forwarding request to ‘systemctl enable vsftpd.service’.[/I]
[I]ln -s ‘/usr/lib/systemd/system/vsftpd.service’ ‘/etc/systemd/system/multi-user.target.wants/vsftpd.service’[/I]
[I]OK[/I]
[I] * Setting up sudo settings…OK[/I]
[I] * Setting up FOG Snapins…OK[/I]
[I] * Setting up and building UDPCast…OK[/I]
[I] * Installing init scripts…OK[/I]
[I] * Setting up FOG Services…OK[/I]
[I] * Starting FOG Multicast Management Server…OK[/I]
[I] * Starting FOG Image Replicator Server…OK[/I]
[I] * Starting FOG Task Scheduler Server…OK[/I]
[I] * Setting up FOG Utils…OK[/I]

[I] Would you like to notify the FOG group about this installation?[/I]
[I] * This information is only used to help the FOG group determine[/I]
[I] if FOG is being used. This information helps to let us know[/I]
[I] if we should keep improving this product.[/I]

[I] Send notification? (Y/N)[/I]

Thanks

Hello,

FOG_1.2.0
Fedora 20

I have successfully installed fog 1.2.0 without an issue. The problem I’m facing is that I’m able to access the web interface from the fog server but I’m not able from another computer in the same network. Firewall is disable and I believe the iptables are not install (not sure). This is an upgrade from Fedora 14, which I had working fine.

Thanks

I was able to make it work again back re installing Fog. Now the problem I’m getting is that after it boots from the network, it seems as everything goes fine until it gets to [[I]configuring (net0 70:5a:…[/I].)].
After that it reboots without going into the fog menu.

I’m trying to register and image an Acer Aspire One 532h with Atheros NIC. Previously I was able to image these laptops before upgrading Fog from 0.32 to 1.2.0.

Thanks

New Error Log

[Mon Jul 28 12:53:18 2014] [notice] Apache/2.2.17 (Unix) DAV/2 PHP/5.3.8 configured – resuming normal operations
[Mon Jul 28 12:54:43 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_flat_75_ffffff_40x100.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 12:54:43 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_glass_75_e6e6e6_1x400.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 12:54:43 2014] [error] [client 10.##.#.##] File does not exist: /var/www/html/fog/management/css/images/ui-bg_highlight-soft_75_cccccc_1x100.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 13:13:37 2014] [error] [client 10.##.0.##] PHP Warning: array_filter() expects parameter 1 to be array, null given in /var/www/html/fog/lib/pages/GroupManagementPage.class.php on line 252, referer: [url]http://10.##.0.###/fog/management/index.php?node=group&sub=list[/url]
[Mon Jul 28 13:16:54 2014] [error] [client 10.##.0.##] File does not exist: /var/www/html/favicon.ico
[Mon Jul 28 13:17:05 2014] [error] [client 10.##.0.##] File does not exist: /var/www/html/fog/management/css/images/ui-bg_flat_75_ffffff_40x100.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 13:17:05 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_glass_75_e6e6e6_1x400.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 13:17:05 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_highlight-soft_75_cccccc_1x100.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 13:23:31 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_glass_75_dadada_1x400.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]

[quote=“Tom Elliott, post: 34215, member: 7271”]Turn off SELINUX:[/quote]

Thanks for your prompted response,

I believe is already disable?

This file controls the state of SELinux on the system.

SELINUX= can take one of these three values:

#enforcing - SELinux security policy is enforced.
#permissive - SELinux prints warnings instead of enforcing.
#disabled - SELinux is fully disabled.
SELINUX=permissive

SELINUXTYPE= type of policy in use. Possible values are:

#targeted - Only targeted network daemons are protected.
#strict - Full SELinux protection.
SELINUXTYPE=targeted

Thanks

Hello,

Fedora14 - Fog 1.2.0

After updating undionly.kpxe I’m unable to register or image host. I update the indionly.kpxe because the Acers 532h are not imaging or registering. When I boot from network, DHCP loads but it gets stuck there.

This is what I’m seeing on the screen

CLIENT MAC ADDR: #### GUID: ######
CLIENT IP: #### MASK: #####
GATEWAY IP: #######

TFTP seems to not be loading

Here is the error log:

[Mon Jul 28 10:54:37 2014] [notice] caught SIGTERM, shutting down
[Mon Jul 28 10:55:30 2014] [notice] SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0
[Mon Jul 28 10:55:30 2014] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Mon Jul 28 10:55:31 2014] [notice] Digest: generating secret for digest authentication …
[Mon Jul 28 10:55:31 2014] [notice] Digest: done
[Mon Jul 28 10:55:31 2014] [notice] Apache/2.2.17 (Unix) DAV/2 PHP/5.3.8 configured – resuming normal operations
[Mon Jul 28 10:55:31 2014] [warn] ./mod_dnssd.c: No services found to register
[Mon Jul 28 11:11:50 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/favicon.ico
[Mon Jul 28 11:13:53 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_glass_75_e6e6e6_1x400.png, referer: [url]http://10.##.0.###/fog/management/css/jquery-ui.css[/url]
[Mon Jul 28 11:13:53 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_flat_75_ffffff_40x100.png, referer: [url]http://10.##.0.###/fog/management/css/jquery-ui.css[/url]
[Mon Jul 28 11:13:53 2014] [error] [client 10.##.0.###] File does not exist: /var/www/html/fog/management/css/images/ui-bg_highlight-soft_75_cccccc_1x100.png, referer: [url]http://10.##.0.###/fog/management/css/jquery-ui.css[/url]
[Mon Jul 28 11:24:00 2014] [error] [client 10.##.1.24] File does not exist: /var/www/html/fog/management/css/images/ui-bg_flat_75_ffffff_40x100.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 11:24:00 2014] [error] [client 10.##.#.##] File does not exist: /var/www/html/fog/management/css/images/ui-bg_glass_75_e6e6e6_1x400.png, referer: [url]http://10.##.0.110/fog/management/index.php?node=about&sub=settings[/url]
[Mon Jul 28 11:24:00 2014] [error] [client 10.##.#.##] File does not exist: /var/www/html/fog/management/css/images/ui-bg_highlight-soft_75_cccccc_1x100.png, referer: [url]http://10.##.0.###/fog/management/index.php?node=about&sub=settings[/url]

Thanks

Thanks for your replay. I upgrade from 1.1.1 to 1.2.0. I fixed the problem! During the installation, I was asked if I left MySQL password blank, I said no and then left the passwords in blank again. This probably overwrite the php file which was previously creating a password when I said yes.

Thanks

I’m trying to upgrade to FOG 1.2.0 but keeps failing. Giving me mysql errors when it comes time to update Database Scheme Installer / updater it give a big list of error messages.

I have see many thread that suggest editing config.php file but that file and the fog folder doesn’t exist in /var/www/fog/…

Thank you