Posts made by Krassus

@george1421 I did a continuous ping to google and it didnt drop once.

Went to the desktop/fog_1.4.4/bin after running sudo -i and ran ./installfog.sh and got hit with permission denied

@george1421 said in Pushing image with failure:

@krassus Does your fog server have internet access?

It could have been disconnected. Will it need that and if so why would it and is there a way around that?

@george1421 said in Pushing image with failure:

@krassus Since you have an RC build already installed you should have a directory called fogproject. It should be in either /root/fogproject or /opt/fogproject.

Change to that directory and issue the following commands.

sudo git checkout master
sudo get pull

Then change to the fogproject/bin and execute ./installfog.sh

if I do a cd to those directories root I cannot get into and opt has a fog directory in it, I do not see a directory called fogproject.

@tom-elliott said in Pushing image with failure:

@krassus Yep.

So I pulled the latest version to a USB and transferred it over.

Its sitting on my users desktop. Running ‘sudo -i’ go to the directory on the desktop in the bin file and run ‘./installfog.sh’ and I get a permission error.

if I try running ‘sudo ./installfog.sh’ out of the directory it throws command not found. Apologize for my noobishness.

thanks,

@tom-elliott said in Pushing image with failure:

Your first bet, I think, would be to try upgrading to at least the latest stable.

Sounds like a doozy. All I need to do is download latest and run installer?

Server

• FOG Version: 1.3.0-RC-9
• OS: Ubuntu 16.0.4

Client

• Service Version:
• OS: Windows 7 Test macine. Will be deploying to a win 10 lab

Description

“An Error has been detected”
"Unable to locate Image store (/Bin/Fog.download)

https://forums.fogproject.org/assets/uploads/files/1501795580759-fogerror-resized.jpg

@krassus said in Going to Management page and get blank screen, any help would be great. Thanks:

@krassus said in Going to Management page and get blank screen, any help would be great. Thanks:

@george1421 said in Going to Management page and get blank screen, any help would be great. Thanks:

@krassus Did you answer yes to install isc-dhcp server? If not you would issue this command prompt
sudo systemctl disable isc-dhcp-server
sudo systemctl stop isc-dhcp-server

I got no prompt in the installer to install DHCP services but I did see it say it was doing so.
I will run the below commands. Thank you again.

Right now I am doing a test capture. You guys are on it, this forum is great with how quick on responses are given and the notification system.

Capture Look liked it work just fine. Pushing the image back was unsuccesful and never threw an error. Booting back into PXE to retry and this is what loads. Ideas?

I am going to make a new thread for this since it looks to be dead.

@krassus said in Going to Management page and get blank screen, any help would be great. Thanks:

@george1421 said in Going to Management page and get blank screen, any help would be great. Thanks:

@krassus Did you answer yes to install isc-dhcp server? If not you would issue this command prompt
sudo systemctl disable isc-dhcp-server
sudo systemctl stop isc-dhcp-server

I got no prompt in the installer to install DHCP services but I did see it say it was doing so.
I will run the below commands. Thank you again.

Right now I am doing a test capture. You guys are on it, this forum is great with how quick on responses are given and the notification system.

Capture Look liked it work just fine. Pushing the image back was unsuccesful and never threw an error. Booting back into PXE to retry and this is what loads. Ideas?

@george1421 said in Going to Management page and get blank screen, any help would be great. Thanks:

@krassus Did you answer yes to install isc-dhcp server? If not you would issue this command prompt
sudo systemctl disable isc-dhcp-server
sudo systemctl stop isc-dhcp-server

I got no prompt in the installer to install DHCP services but I did see it say it was doing so.
I will run the below commands. Thank you again.

Right now I am doing a test capture. You guys are on it, this forum is great with how quick on responses are given and the notification system.

@sebastian-roth said in Going to Management page and get blank screen, any help would be great. Thanks:

@Krassus Take a look at the apache error log (see my signature!) and post log messages here.

Thank you!

@george1421 said in Going to Management page and get blank screen, any help would be great. Thanks:

@krassus The white screen means that something is going wrong with FOG program code. FOG uses the apache web server to host the FOG site. Any time apache runs into an error message it logs it in the apache error log. To view the last few lines in the apache error log you would use the following command tail /var/log/apache2/error.log Its possible that the name of the apache error log is not error.log, but error_log (I’m a rhel guy not ubuntu so I can’t be precise).

Didnt know you meant the ‘tail’ command. Heck ill be honest im no linux guru so I didnt know there was a tail command. I can log into it now.

How do I make sure that the DHCP service installed with fog is disabled?

thanks,

@george1421 said in Going to Management page and get blank screen, any help would be great. Thanks:

OK then I would surely review that fog enemy document and then post the tail of the apache error log if the white screen doesn’t get fixed.

Then you ‘might’ consider updating your version of FOG to the latest 1.4.4. The 1.3.0 RC9 is really old. But lets fix what you have right now then worry about upgrading later.

I will update once we get this up is the upgrade process a pain? Currently re-running the installer against the server. I will test again and see if it persists, if it does, what do you mean by the tail of the apache error log? Last portion of the text?

@george1421 said in Going to Management page and get blank screen, any help would be great. Thanks:

It would really be helpful to know what version of FOG you installed. 1.3.0-RC-9

Was this a new install or just one day it broke? (Someone Else set it up, I am picking up the pieces)

Since you have Ubuntu 16.04 you might want to review this document: https://forums.fogproject.org/topic/10006/ubuntu-is-fog-s-enemy

Lastly, if you continue to get a white screen, this means that the php program is having issues. Please review (tail) the apache error log in /var/log/apache2 and post the results.

@krassus said in Going to Management page and get blank screen, any help would be great. Thanks:

Server

• FOG Version: 1.3.0-RC-9 I believe
• OS: Ubuntu 16.0.4

Client

• Service Version:
• OS: Windows 10

Description

Server

• FOG Version: Good question
• OS: Ubuntu 16.0.4

Client

• Service Version:
• OS: Windows 10

Description