Thanks, I’ll try that and let you know.
Posts made by josh.martin
-
RE: Unable to set image to "Enabled / Replicate"
-
Unable to set image to "Enabled / Replicate"
Not sure when this issue came about or from what build it stopped working. I am currently on Trunk build version 7733.
I have several images that have been captured for some time and i am able to see them in the images tab within the Fog web interface.
I confirmed the images and all files are on the server as well. When i select the image i want i can check the box to “Enable” the image and “Replicate” but once i hit the update button the checks go away. They only check that will stay after hitting the update button is “Protected”. Any tips would be appreciated or if someone could tell me if this function is working on the newer builds of Trunk and i can upgrade.Thanks!
-
RE: Host PXE boot issues
Confirmed working now on build 7733. Thanks for the quick fix Tom!
-
RE: Host PXE boot issues
I could in theory wait, but for future knowledge i wouldn’t mind knowing how to do this in the event i need to do it promptly.
Yes this is a VM so i already have taken a snapshot today in case something like this needed to happen.
-
RE: Host PXE boot issues
It is currently impacting production.
Where can i find some instructions on down grading or am i supposed to do the upgrade process to a specific version? -
RE: Host PXE boot issues
I am on Trunk build 7729 and yes i was about to say a few other people seem to be experiencing this same issue as i look through posts on here.
Ubuntu 14
Checked all my sql settings and can login successfully with the same credentials that the web interface has stored.
-
Host PXE boot issues
I am able to get my hosts to PXE boot and they all are seeing my fog server just fine. However, they get stuck in a loop and never actually boot up to the fog GUI. Any help would be greatly appreciate as i have already went through all the wiki articles i could find related to this and tried to confirm all my settings/ permissions/ credentials we all correct.
-
RE: Lenovo Yoga ThinkPad S1
@Tom-Elliott
This is where i am getting stuck at.Here -
RE: Lenovo Yoga ThinkPad S1
I was able to successfully update to the new trunk (release 7188). Once upgraded i was able to ipxe boot the machine and reach the fog menu FINALLY! The quick inventory and registration task also worked properly. I can now see the machine in the Fog web management console. However, when i attempt to ipxe boot the same machine again it is getting stuck on loading the “boot.php” file. It certainly sees the file and stops at 94% of the download. Unable to get it past this point now.
-
RE: Lenovo Yoga ThinkPad S1
You were correct in recommending the “undionly.kkpxe” file. Once i made that change i was able to reach the fog gui with no issues. However, once i begin the quick inventory it appears to be working like normal until it tries to send the inventory to the server and it just freezes there until i cut it off.
+1 for progress!
-
RE: Lenovo Yoga ThinkPad S1
You are correct I am currently using “undionly.kpxe” in the dhcpd.conf. I will give the others a shot in a bit once i get settled in and report back some results. Is a reboot of the server necessary when making these changes to the dhcpd.conf?
-
RE: Lenovo Yoga ThinkPad S1
The usb dongle i’m using is the Here once plugged in and i boot to it I see that it is a Realtek RTL8153.
-
Lenovo Yoga ThinkPad S1
I have been trying for a week now trying to get this yoga to ipxe boot off of a (lenovo ) usb 3.0 ethernet dongle. So far i am able to see the dongle in the bootable devices and it will ipxe far enough to see the fog server and then it will get stuck at “initializing devices”.
Things I’ve tried so far based off of other posts regarding this topic and model:
1.Edited the etc/dhcp/dhcpd.conf to show my fog server as the next-server.
RESULT: Able to ipxe boot but stops at the screen “initializing devices” still.- Created a bootable usb using this guide Here
RESULT: Machine tries to boot into the ipx file but doesn’t get dhcp to reach the fog gui.
Also tried the bootable usb on a desktop to make sure it was working properly and i am able to reach the fog gui and receive tasks properly.
Any help would be greatly appreciated as i am at a loss now on where to go from here.
- Created a bootable usb using this guide Here