Posts made by joanmarzo

@george1421 Where? In my fog or in my laptop?

@george1421 It’s work! but i have poblems with the registration

https://ibb.co/TtvbTQV u can see the error here

any idea?

Hi,

I have problem to start PXE in Dell Latitude and Vostro, i find in a dell forum this information

https://www.dell.com/support/kbdoc/es-es/000124383/pxe-boot-dhcp-server-requirements-for-dell-xps-optiplex-latitude-precision-systems-shipping-after-2019

Any idea?

Thans

@george1421 Hi friend,

I reinstall fog and do the same of the another day and it’s work, than u for your time

@george1421 How I can get turn on the HTTPS?

The other day it worked for me and I haven’t changed anything, it’s weird…

@george1421

1. The machine it’s in on the same vlan and the same subnet

2. I can access

Any idea? thanks

@george1421 said in Connection timed out /fog/service/ipxe/boot.php:

You appear to have 2 dhcp servers on your network because its asking for the tftp server name. That dhcp answer is not providing dhcp option 66 to iPXE. In your case since you are running dnsmasq you might want to remove both dhcp options 66 and 67 from your dhcp server.

Hi, I have differents vlans but only have dhcp in 96.1 and I put the 66 and 67 in 96.1

And yes, I can accessn to the fog web interface

Hi friends

I have a problem to execute my fog, I paste and screenshoot about the error:

Any idea?

Thanks u!

@george1421 IT’S WORK!!! THANKS A LOT!

@george1421 said in PXE-E32: TFTP open time out on palo alto dhcp server:

ps aux | grep dnsmasq

yesss

@george1421 said in PXE-E32: TFTP open time out on palo alto dhcp server:

systemctl disable dhcpd

@george1421 I use Centos7

@george1421 said in PXE-E32: TFTP open time out on palo alto dhcp server:

grep dnsmasq /var/log/messages

I try to initiate the dnsmasq but it doesn’t work

@george1421 said in PXE-E32: TFTP open time out on palo alto dhcp server:

ps aux | grep dnsmasq

Yes, the dnsmasq it’s work but I have the same error:( if u want we can do an remote session haha

@george1421

I do the dnsmasq but the fog doesn’t work, any idea? I paste an screenshot about the ltsp.conf

@george1421 said in PXE-E32: TFTP open time out on palo alto dhcp server:

This is me just making an educated guess. Has the IP address of the fog server changed since FOG was installed? The fog server needs to be configured to use a static IP address before FOG is installed. As I said this is an educated guess but a FOG server IP address of .162 is pretty close to the IP address assigned to the target computer of .206. I might guess they are in the same subnet dhcp scope range. That is why I’m asking if the fog server ip address has changed.

Yes, the IP of fogserver is 192.168.96.162 and I put it and static IP, If u want any information tell to me, thanks a lot

@george1421

Yes, I use palo alto dhcp too and I put this in 66 and 67 options!

Thanks!

Hi,

I have the same problem, can u help me?

@george1421 Hi George,

I do this step:

But when I put the command in my server fog this command show me this:

Any idea?

@george1421 said in Connect NAS storage to FOG:

Ah I see it. you have a host IP address defined. That says that only 192.168.25.92 can connect to this nfs share. The issue/problem is the target computer’s connect to this NFS share so you need to allow all or the subnet where the target computers will image from in that restriction.

I do the configuration,

And the FOG change the error: