Posts made by jmvela2x

@Sebastian-Roth multicast.log

[05-05-20 12:08:27 pm] 
==================================
===        ====    =====      ====
===  =========  ==  ===   ==   ===
===  ========  ====  ==  ====  ===
===  ========  ====  ==  =========
===      ====  ====  ==  =========
===  ========  ====  ==  ===   ===
===  ========  ====  ==  ====  ===
===  =========  ==  ===   ==   ===
===  ==========    =====      ====
==================================
===== Free Opensource Ghost ======
==================================
============ Credits =============
= https://fogproject.org/Credits =
==================================
== Released under GPL Version 3 ==
==================================


[05-05-20 12:08:27 pm] Interface Ready with IP Address: 10.132.81.150
[05-05-20 12:08:27 pm] Interface Ready with IP Address: 127.0.0.1
[05-05-20 12:08:27 pm] Interface Ready with IP Address: 127.0.1.1
[05-05-20 12:08:27 pm] Interface Ready with IP Address: 192.168.122.1
[05-05-20 12:08:27 pm] Interface Ready with IP Address: f223pxefog.fm.intel.com
[05-05-20 12:08:27 pm]  * Starting MulticastManager Service
[05-05-20 12:08:27 pm]  * Checking for new items every 10 seconds
[05-05-20 12:08:27 pm]  * Starting service loop
[05-05-20 12:08:27 pm]  * No new tasks found
[05-05-20 12:08:38 pm]  * No new tasks found
[05-05-20 12:08:48 pm]  * No new tasks found
[05-05-20 12:08:58 pm]  * No new tasks found
[05-05-20 12:09:08 pm]  * No new tasks found
[05-05-20 12:09:18 pm]  * No new tasks found
[05-05-20 12:09:28 pm]  * No new tasks found
[05-05-20 12:09:38 pm]  * No new tasks found
[05-05-20 12:09:48 pm]  | Task ID: 22 Name: Test is new
[05-05-20 12:09:48 pm]  | Task ID: 22 Name: Test image file found, file: /images/Ubuntu-16.04-Legacy
[05-05-20 12:09:48 pm]  | Task ID: 22 Name: Test 2 clients found
[05-05-20 12:09:48 pm]  | Task ID: 22 Name: Test sending on base port 53110
[05-05-20 12:09:48 pm]  | Command: /usr/local/sbin/udp-sender --interface eno1 --min-receivers 2 --max-wait 36000 --mcast-rdv-address 10.132.81.150 --portbase 53110 --full-duplex --ttl 32 --nokbd --nopointopoint --file /images/Ubuntu-16.04-Legacy/d1p1.img;/usr/local/sbin/udp-sender --interface eno1 --min-receivers 2 --max-wait 30 --mcast-rdv-address 10.132.81.150 --portbase 53110 --full-duplex --ttl 32 --nokbd --nopointopoint --file /images/Ubuntu-16.04-Legacy/d1p2.img;
[05-05-20 12:09:48 pm]  | Task ID: 22 Name: Test has started
[05-05-20 12:09:58 pm]  | Task ID: 22 Name: Test has been completed
[05-05-20 12:09:58 pm]  | Task ID: 22 Name: Test has been killed
[05-05-20 12:09:58 pm]  | Task ID: 22 Name: Test is now completed
[05-05-20 12:10:08 pm]  * No new tasks found
[05-05-20 12:10:18 pm]  * No new tasks found
[05-05-20 12:10:28 pm]  * No new tasks found
[05-05-20 12:10:38 pm]  * No new tasks found
[05-05-20 12:10:48 pm]  * No new tasks found
[05-05-20 12:10:58 pm]  * No new tasks found
[05-05-20 12:11:08 pm]  * No new tasks found
[05-05-20 12:11:18 pm]  * No new tasks found
[05-05-20 12:11:28 pm]  | Task ID: 23 Name: Test is new
[05-05-20 12:11:28 pm]  | Task ID: 23 Name: Test image file found, file: /images/Ubuntu-16.04-Legacy
[05-05-20 12:11:28 pm]  | Task ID: 23 Name: Test 2 clients found
[05-05-20 12:11:28 pm]  | Task ID: 23 Name: Test sending on base port 60722
[05-05-20 12:11:28 pm]  | Command: /usr/local/sbin/udp-sender --interface eno1 --min-receivers 2 --max-wait 36000 --mcast-rdv-address 10.132.81.150 --portbase 60722 --full-duplex --ttl 32 --nokbd --nopointopoint --file /images/Ubuntu-16.04-Legacy/d1p1.img;/usr/local/sbin/udp-sender --interface eno1 --min-receivers 2 --max-wait 30 --mcast-rdv-address 10.132.81.150 --portbase 60722 --full-duplex --ttl 32 --nokbd --nopointopoint --file /images/Ubuntu-16.04-Legacy/d1p2.img;
[05-05-20 12:11:28 pm]  | Task ID: 23 Name: Test has started
[05-05-20 12:11:38 pm]  | Task ID: 23 Name: Test has been completed
[05-05-20 12:11:38 pm]  | Task ID: 23 Name: Test has been killed
[05-05-20 12:11:38 pm]  | Task ID: 23 Name: Test is now completed
[05-05-20 12:11:48 pm]  * No new tasks found
[05-05-20 12:11:58 pm]  * No new tasks found
[05-05-20 12:12:08 pm]  * No new tasks found
[05-05-20 12:12:18 pm]  * No new tasks found
[05-05-20 12:12:29 pm]  * No new tasks found
[05-05-20 12:12:39 pm]  * No new tasks found
[05-05-20 12:12:49 pm]  * No new tasks found
[05-05-20 12:12:59 pm]  * No new tasks found

@jmvela2x I updated to 1.5.9-RC1.4, changed line 662 per your earlier instructions and tried to kick off a multicast task. The log shows the task start, then completed, then killed, then completed again, and then removes itself from active tasks. This seems like step backwards. Am I missing something?

@Sebastian-Roth I’ll give it a shot tomorrow and let you know. What the timeline one a new version making it from RC to an actual official release typically?

@jmvela2x Multicast appears to be working after swapping out the switch. I was successfully able to image two clients concurrently sans registration (this is important to the solution as host registration would cause us a lot of extra work) in our environment.

I did notice the task is still showing in active tasks and has not cleared out. Is that an issue you are aware of?

@Sebastian-Roth I will add this to the list of testing after the switch is swapped out for the prod Catalyst if I am still having issues.

@george1421 The switch is a Nexus 9372TX, but my network guy is onsite now and he told me the switch (the Nexus) in the test lab is not our POR in the main rack space where this solution will ultimately be deployed so he’s going to swap it out (with a Catalyst we use in our prod lab) and we will retest and update this thread with our results.

@jmvela2x Same issue as before @Sebastian-Roth. The network admin should be on site later today to do some more looking into the infrastructure side of things. In the meantime is there anything else I can try from my end?

@Sebastian-Roth I’ll start on getting another couple machines setup to test on. For what it’s worth these two machines do unicast just fine. Thanks for the hands on help and proving me right when I told management the devs are really responsive in the forums.

@jmvela2x I still see the same issue. It makes it to the second partition without issue and starts to deploy. It gets to somewhere in the high 80% range and then the ‘Rate:’ starts dropping and no more progress is observed. The output from <sudo service FogMulticastManager status> shows two connections, start transfer, two disconnections, two connections, start transfer, then two disconnections and a “transfer complete” message. After that it just dies in the midst of that for some reason I cannot fathom.

@Sebastian-Roth I changed the code you referenced, removed all the old multicast tasks, rebooted the server, and am running a new 2 client multicast session now. I hope it works, but the issue is not hanging between partitions as much as it hangs most of the way through the second partition after it picks up the task and starts the image deployment. Will advise.

I am on FOG 1.5.8. The target clients are on the same subnet as the FOG server. I have been working with our network admin about the switch configuration and this was his last comment on my ticket (“ok Auto RP (PIM) has been configured as well as IGMP snooping, and MSDP has been enabled. Go ahead and run a test.”). For the time being the server and the target clients are all on the same subnet/VLAN/switch while I do my testing.

I am able to successfully test multicast as detailed her: https://wiki.fogproject.org/wiki/index.php/Multicasting#Troubleshooting. It works with one and two clients. When I submit a multicast task via the images tab in the WebGUI the session starts fine according to the log and I am able to boot two clients to it and begin multicasting. The first partition of my Win10 image deploys without any issues, but after it hits the second partition around 88% - 90% the cited transfer rate in Partclone starts dropping rapidly and no more progress is seen. The FOGMulticastManager cites client disconnections due to timeout. Any ideas?