Topics created by hungns35

What version of FOG?

The 500 error is from apache, you might want to inspect the apache error logs in /var/logs.

If you had ubuntu installed, I might think that ubuntu has applied a patch and secured the database, but you are using fedora so that’s probably not the issue. But again, check the apache error logs first.

This question is a bit vague on details, so the answer is it depends.

If you sysprep the image and you are using windows 10 then the answer is probably. The 9020 is pretty old now so windows 10 probably has all of the native drivers for for the 9020 built in. You will probably want to ensure the firmware is updated on the 9020 to the latest and set the firmware to uefi mode to match the configuration of the 7760. The difference in generation of computers are quite large so there is a risk that it won’t work because the technoliogy between the two platforms are quite different. You will also need to make sure you have enough ram in the 9020 too. Finally on the 9020 you will need to swap out the spinning HDD for a SSD drive or running windows 10 on the 9020 will give an unhappy experience.