Posts made by handso

@george1421 I booted it into windows and did disk check and memory check. Every thing came back clean. I am kinda out of ideas to try. The only remaining one is the dev branch of FOG.

@george1421 So I did the capture through the debug method. Unfortunately no error message outputted on the screen during the capture. It happens around 8% of disk 3 being cloned. It just exited directly and restarted.
The Linux Kernel is 5.10.71 Tom Elliott arm64. Hope that helps. Appreciate the time.

@george1421 Thanks I will try to upgrade to the Dev build and give it a try. I am using the latest fog linux and kernel. I don’t have access to the system to provide you with exact number, but I do know I updated to the latest stable release. If there is anything else I can try please let me know.

@george1421 Thanks for the reply. We are using the latest FOG release 1.5.9 and Ubuntu 20.04 LTS.
There was 90 gigs of space available on the FOG server. Is that not enough? Usually the MFF image. takes only about 50 gigs of space.
We did a memory check etc and everything came back clean.
This issue happened with 2 MFF’s but never with any other system.

Hello,

We used to use Clonezilla and still do occasionally but recently transitioned to FOG Project.
We are using FOG successfully for the past few weeks across the 5060, 5080 and 5090 Dell computers and laptops. But for the 5090 MFF it restarts during the partition 3 of the capture process (about 8% is completed).
The only thing we do before we capture is restore the 5090 MFF with an existing clonezilla image before we start the capture with FOG.
There is no error or anything displayed.
We tried to put the system back to the original state and try and it still fails.
Would really appreciate any help.