Posts made by Glyn

Are other machines getting their images OK?
Have you tried rebooting the server?
Do you have a storage node set up?

I assume the results were the same?
Have you ikmaged these machines in the past with no problems?
I have had some machines that upload the image to the server no problem, but when it comes to deploying the image it fails.
In this situation I re-create an image using True Image & then use True Image to deploy it. More work, but gets over the issue.

Glad you got it working & good to know that PHP5.4 isn’t supported yet. I assume it will be in the next release.

Are you sure that the FOG image is OK & has not become corrupt?

When I set up FOG I let the installer download & install the packages that it required, did you do this?

You should be seeing a similar page to the one attached.
If not there could be a problem with you FOG install.

[url=“/_imported_xf_attachments/0/106_Clipboard01.jpg?:”]Clipboard01.jpg[/url]

Is this error on one machine or all machines?
I had an error like this & found that the HDD on the client machine had gone faulty.

Is it possible to move images from one storage node to another?
Can it be done in FOG or manually. If so how?
Cheers

Answered this one myself.
Install Ubuntu 10.04 & it installed with no problems.

I was having similar issue, but I got the image to the disc, but on reboot them machines just BSOD on me.
I changed the hard drives & re imaged & they are then OK. Could it be a faulty hard drive?
You could swap a drive from a working imaged machine & see if they then boot. Then try another HDD.

Your best bet is to read the Fog user guide:
[url]http://www.fogproject.org/wiki/index.php?title=FOGUserGuide[/url]
Have to got the server set up correctly so that you can tftpd boot? Do you get the pxe menu up?

Been trying to add a storage node to the fog system & am getting the following error:
Setting up fog userinstallfog.sh: 296: Bad substitution
I already have a storage node, but this has filled up so I need to add a new one.
I get this error after the setup & installation of the packages.
I would like to get this sorted as soon as possible as I have images to create.
I am using Ubuntu 11.10 for all Fog systems.
Cheers