edit (nano or vi) " /etc/default/tftpd-hpa " and add “sleep 30” on the top line so it looks like :
[I][B]sleep 30[/B][/I]
[I][B]# /etc/default/tftpd-hpa[/B][/I]
[I][B]# FOG Modified version[/B][/I]
[I][B]TFTP_USERNAME=“root”[/B][/I]
[I][B]TFTP_DIRECTORY=“/tftpboot”[/B][/I]
[I][B]TFTP_ADDRESS=“0.0.0.0:69”[/B][/I]
[I][B]TFTP_OPTIONS=“-s”[/B][/I]
will have to restart the service or reboot
sorry still won’t fix it anyways
the workstation in the pxe process isn’t being allocated an ip address but an up and running os can ?- can you post a screen shot?
tftp on fog ok - running confirmed
dhcp - giving addresses options 66&67 set ok
routing ok
firewall rules (any,any) nothing should be blocked …ok
try from the windows box (10.120.100.x subnet right?) command prompt tftp [I]foghost[/I] get pxelinux.0 ?
check the sata mode in the bios - try using ata /ahci - swapping them around maybe the machine that was imaged from had a different setting to what you are imaging too in conjuntion with the chainloading link as above.
if it’s on a separate box - make sure mysqld listens on a physical interface rather than 127.0.0.1
also check to make sure you are able to route to your fog server …
i was under the impression it was getting an ip address ??? you syslog post [B]“sent /tftpboot/fog/bg.png to 10.120.100.41” [/B]
right ?[B][/B]
so if that subnet isn’t getting dhcp - is there a scope set on the windows box for that subnet with a pool set - is the pool exhausted ? check to see if the pool isn’t exhausted …
just try updating PXELINUX as described [url]http://www.fogproject.org/wiki/index.php/Boot_looping_and_Chainloading[/url]