Posts made by dfuriet

Any news for ipxe problem ?

My iMac14,1 : (Dont work)

ROM : IM141.0118.B14
SMC : 2.14f24

Immediately after banner text is displayed, Ethernet Card power off a few seconds, then Ethernet Card power on… It’s at this time that ipxe crash

On my iMac14,1, I can’t go into the menu because there a no errror showing, only banner text :

iPXE initialising device...ok

iPXE 1.0.0+ (26050) -- Open Source Network Boot Firmware -- http://ipxe.org
Features : DNS FTP HTTPS iSCSI NFS TFTP SRP VLAN AoE EFI Menu

then crashed with nothing else

Sometime I have more, like my first (reversed) picture

My second picture is on a iMac17,1, but I don’t have it anymore

@Sebastian-Roth I would prefer my imac14,1 work with fog… My iMac17,1 is showed on this topic as a example.

I have a new iMac (imac17,1) with another ipxe problem :
On ipxe boot there are no freeze, like my imac14,1, but net0 cannot link up. See picture.

I have no problem, when macOS is loaded : IP address is comming with isc dhcp. Network cable connected correctly.

My new iMac17,1 have same Broadcom 57766-A1 and same wifi card on my iMac14,1

@Sebastian-Roth

Here my wifi card. But I’m dont using wifi on my iMac, only ethernet card.

@Sebastian-Roth
My iMac is Imac14,1.
Here is my Ehernet Card (in french) :

I have updated fog to last version 1.3.3, I can boot with a PC. On mac I hare this error (sorry for revesed picture) :

@dfuriet No, because there a no errror showing, just banner text

@george1421 No

@george1421 Yes, On the Mac, I have the ipxe banner text

same freeze screen with ipxe7156.efi …
My install is a upgrade from previus 1.3.0RCxx release. I’ll try with a new fresh install of 1.3.0.

Yes, my mac is just freeze, or waiting something
I’ll try ipxe7156.efi

Thank you

Server

• FOG Version: 1.3.0
• OS: Centos 7

Client

• Service Version: ??
• OS: Mac OS X 10.11.6

Description

I use ISC DHCP configured for mac like on this page : https://wiki.fogproject.org/wiki/index.php?title=FOG_on_a_MAC, tag fancy

when I boot my iMac (mid 2014), the mac download only ipxe.efi, then it’s stopped for any reason …

with wireshark, I can show the DHCP dialog and the TFTP dialog. Before download ipxe.efi, there are an error :
Error Code, Code : Option negotiation failed, Message : User aborted the transfer,

But the tranfer of ipxe.efi rebegin up to the end (completly without another error)

On /var/log/messages :
Jan 12 11:23:55 for-serv in.tftpd[29536]: tftp: client does not accept options
Jan 12 11:24:00 fog-serv in.tftpd[29537]: Client x.x.x.x finished ipxe.efi