Posts made by danilopinotti

@Wayne-Workman
Do you have any tips to facilitate the process?
Until then I installed FOG and a DHCP server on itself. I would like to update gradually and go testing each SVN?

@Wayne-Workman
I do not get my boss’s authority to create virtual machines and test SVNs

@Wayne-Workman
It would have somewhere that explains how to do to go giving these small changes in SVN?
What is the SVN fog 1.2.0?

@Wayne-Workman
Today is not possible but tomorrow i can try to arrange this.

@Wayne-Workman Thank you

I don’t remember when I created the image (when it worked) I’ve used the Trunk or still using 1.2.0

@Wayne-Workman

Sorry for my english.

I put an image from another computer (an image with Ubuntu) that this was giving problem. With that, I noticed that the problem is in the Debian image and not on the computer.
Previously, this image Debian did not have this problem. I have no idea why.
Did not do Dual Boot or anything else.

I’m better at reading English than to write, so write these means strange phrases.

@Wayne-Workman
No. I put another image on it with Ubuntu.
Before I could climb this (faulty) for FOG, but now does not. Now happens that I described.

@Wayne-Workman
The strange thing is that in my case, I do not use Dell computers (if it is a chance) and it only happens with this in particular. If I put an Ubuntu on the same computer, this works with FOG.

@Wayne-Workman

**ls -laht /images/ItautecDebian022015/**
total 7,7G
drwxrwxrwx 14 root root 4,0K Out 21 15:52 ..
drwxrwxrwx  2 root root 4,0K Out 21 15:52 .
-rwxrwxrwx  1 root root 7,7G Out 21 15:52 d1p2.img
-rwxrwxrwx  1 root root   47 Out 21 15:46 d1.original.swapuuids
-rwxrwxrwx  1 root root   31 Out 21 15:44 d1.original.fstypes
-rwxrwxrwx  1 root root  18K Out 21 15:44 d1.mbr
-rwxrwxrwx  1 root root  324 Out 21 15:44 d1.sgdisk.original.partitions
-rwxrwxrwx  1 root root    2 Out 21 15:44 d1.fixed_size_partitions

**ls -lahRt /images/dev**
/images/dev:
total 12K
drwxrwxrwx  3 root root 4,0K Out 21 15:52 .
drwxrwxrwx 14 root root 4,0K Out 21 15:52 ..
drwxrwxrwx  2 root root 4,0K Ago 13 12:09 b4b52f50bfc8
-rwxrwxrwx  1 root root    0 Jul 29 09:47 .mntcheck

/images/dev/b4b52f50bfc8:
total 8,0K
drwxrwxrwx 3 root root 4,0K Out 21 15:52 ..
drwxrwxrwx 2 root root 4,0K Ago 13 12:09 .

Mod edited to use code boxes.

Yes, the partition is the type Ext4. For server i use Ubuntu 14.04 without RAID

They are perfectly equals. As i said, just the fact that I raise the image to the server, the system will be corrupted.

I use FOG 4469

I need to activate machines in the following situations:
Multiple machines with the same key
Multiple machines with different keys
Activate computers after imaging for that in the future, I can replace them.

Hello,
recently I came across a problem that have been giving a lot of headaches.
I have a computer I use to create Image of Debian. When I give upload the image to the server, the computer image stops working and displays the following message: “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key.”
NOTE: The image that went to the server also has this problem if I try to use it on some other computer.
NOTE 2: The image I am trying to create is Debian. With another image (eg Ubuntu) this problem does not appear.
NOTE 3: The problem started only appear for a while now and just that image (Debian 7).
NOTE 4: You tried to delete the server image and climb it again, but the error persisted.

I use FOG 4469

Its possible insert the product key on windows 7 without create a snapin with .bat file or sysprep?

This way worked.
All computers need to have the printer driver to work?

The video that i say was finded in FOG Wiki:
https://wiki.fogproject.org/wiki/index.php/Managing_FOG#Printers
( http://freeghost.sourceforge.net/videotutorials/printer.swf )

FOG Version: 4630

To add the printer, I set as a local printer and put all the information with correct syntax, according to the video. However, the INF file does not contain the same information. I used the same nomenclature that Windows provides when we go to install the printer and choose a driver manually. So, i linked the INF file with C:\Windows\inf\ntprint.inf even though it was different from the one in the video.

I formatted the machine again, only this time I created the partitions before sending install direct. In this way it worked.

Hello,
I tried to configure a network printer, as shown in the video, but the INF file contains no data printer. I’m using windows 7. Has anyone had a similar experience?
Trying to force installation even with the data “correct”, the log displays the following error: “Service ERROR: Invalid parameter”.

@Wayne-Workman
I’ll soon be putting all they requested