@Sebastian-Roth I search for " realtek undi driver" for fog in google and i found a page in the forum with this link in the tftp in the 1.4.4 section.
It was missing in the 1.5.8. i just add it.

i let the 1.5.8 binaries in /tftpboot except i had only the “ipxe7156.efi” file. I was obliged to rerun the installation script because the file “ipxe7156.efi” had not the right group permissions.

@cyrmoon I tried to apply this solution, i created three policy in the ipv4 dhcp scope:

• “PXEClient:Arch:00002” and “PXEClient:Arch:00006” both should get “i386-efi/ipxe.efi” as their option 067 boot file.

“PXEClient:Arch:00008”, “PXEClient:Arch:00009”, and “PXEClient:Arch:00007” should get “ipxe.efi” as their option 067 boot file.

“PXEClient:Arch:00007:UNDI:003016” should get “ipxe7156.efi” this file is specific to the Surface Pro 4.

i downloaded from “https://github.com/FOGProject/fogproject/tree/1.4.4/packages/tftp” the “ipxe7156.efi” , i put it in /tftpboot; i rerun the install fog script and it seems to work.

What do u think about it? a reliable solution or a future problem?

I used not fog in a dhcp server, i used a server 2016 for dhcp with option 66 and 67.
I always used the fog menu , i saw it before update, and on others models i see it too.
I delete all in the “tftpboot” on the fog server and replace with all binaries in the link u gave me.
I tried but it’s the same; maybe the problem came from my windows dhcp server.
I change for a window server 2016 dhcp and the others models boot with undionly.kpxe. (the g558 esprimo have only uefi boot)
The uefi bios boot with ipxe.efi?
i found a fog doc here. “https://wiki.fogproject.org/wiki/index.php/BIOS_and_UEFI_Co-Existence” Thats is a solution?

Hi everybody, i update a fog 1.5.7 to a 1.5.8 on debian 8.
Before update, i can boot on pxe with the “fujitsu esprimo g558”; but after update i have only this message “NBP file downloaded succesfully” and i return to the boot selection. Thats’ all.
I have a uefi network boot only in bios options. I tried update bios…
The others models works with update. What is the problem with esprimo g558 based on a “realtek uefi undi driver 2.0.40”?
I tried to change for a older kernel in fog but nothing at all.
A subject like this was opened in 2018 but i didn’t find a answer.
Is there a solution or it will be fixed in next versions?

@Wayne-Workman no i let job finish. the two pcs are deployed with success.
but the task disappeared at the end and doesn’t enter in the database. result no log imaging.

@Wayne-Workman !
Before multicast

After multicast

log viewer

After update of my 1.2.0 version to trunk 7302, i did :

• sudo fog passwd
• same password in storage management and tftp server
• change /opt/fog/.fogsettings with my password
• no message errors and multicast deploy works.

Except i have a message at the very end of multicast.
No Active task found

in fact , the task is not registred in database. any clues?

same things with trunk 7264.
i tried capture a win 7 but same problem. i have the same message and in the web interface the task never end.

@Tom-Elliott exactly.