• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login
    1. Home
    2. BREIT
    3. Posts
    B
    • Profile
    • Following 0
    • Followers 0
    • Topics 6
    • Posts 49
    • Best 5
    • Controversial 0
    • Groups 0

    Posts made by BREIT

    • RE: FOG slow to image when on VM

      I’ll throw my two-cents in here. Has anything changed network wise? I know I ran into an issue when one of the hubs we had went down and we replaced it with a 10/100 we had lying around. As soon as we put in a gigabit hub it was blazing again. Just an idea.

      posted in FOG Problems
      B
      BREIT
    • RE: Powershell script runs but......

      Thanks for everyones help. I decided to try it on an actual device and add the -Wait at the end and that worked. @jflippen your way worked as well. For what ever reason my VM was would both say complete right after the start of script. When I attempted to run it on a physical PC it worked without any issues and completed with the delays.

      posted in FOG Problems
      B
      BREIT
    • RE: Powershell script runs but......

      @jflippen Thanks. I’ll look into this.

      posted in FOG Problems
      B
      BREIT
    • RE: Powershell script runs but......

      @george1421 -Wait was one of the first things I tried. Same thing happened. I might try to make a batch script and try /wait for kicks and giggles. Curious to see if it would still happen or if it would work as expected. I might give that a go tomorrow.

      posted in FOG Problems
      B
      BREIT
    • RE: Powershell script runs but......

      @george1421 Yes you are following correctly. If I run the script manually it will run until that file shows up then exit as expected.

      posted in FOG Problems
      B
      BREIT
    • RE: Powershell script runs but......

      @george1421 the path.to.file is set to the network location location of the the setup.exe that runs the .msp. I am running ours via powershell which is why .\ is there, it wouldn’t run without it. Like I said above the script runs just fine. Its just that fog comes back saying its completed almost immediately. Which it will complete just 4 or 5 mins later. I will however try your suggestion.

      posted in FOG Problems
      B
      BREIT
    • RE: Powershell script runs but......

      @Wayne-Workman I tried that and it failed. Which lead me down this rabbit hole. This process worked minus the quick complete message. Takes about 4 to 5 mins and it completes. All my other processes are running fine with the way you’ve mentioned.

      @jflippen I would appreciate that.

      This install is for Office 2013.

      posted in FOG Problems
      B
      BREIT
    • Powershell script runs but......

      So the script I built runs as expected but FOG reports it as being complete within 5 seconds of running. Even though Office 2013 hasn’t been installed yet. Any ideas?

      Start-Process 'Path.To.File' -ArgumentList '/adminfile .\FogOffice2013.MSP' 

$file = "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Microsoft Office 2013"

do{
$testpath = Test-Path -Path $file
Start-Sleep -s 90
}
until($testpath -eq $true)
      posted in FOG Problems
      B
      BREIT
    • RE: Update failed do to wget

      I had to go in and manually delete each unused version. After that if fixed my issue. I was able to successfully update fog.

      Thanks for your help.

      posted in FOG Problems
      B
      BREIT
    • RE: Update failed do to wget 
      
Filesystem                     Size  Used Avail Use% Mounted on
/dev/mapper/FOG--IP1--vg-root  835G  205G  595G  26% /

      /boot is showing 100% when I do a regular df. I don’t think I’ve ever maxed out boot before but I’m not 100% sure.

      posted in FOG Problems
      B
      BREIT
    • RE: Update failed do to wget

      apt-get update

      Hit:1 http://us.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB]
Get:3 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
Hit:4 http://ppa.launchpad.net/ondrej/apache2/ubuntu xenial InRelease
Get:5 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]
Hit:6 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease
Get:7 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [793 kB]
Get:8 http://us.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [725 kB]
Fetched 1,841 kB in 0s (1,939 kB/s)
Reading package lists... Done

      apt-get update -f (Got an error code 1 with apt-get update)

      Unpacking grub-pc-bin (2.02~beta2-36ubuntu3.18) over (2.02~beta2-36ubuntu3.17) ...
Preparing to unpack .../grub2-common_2.02~beta2-36ubuntu3.18_amd64.deb ...
Unpacking grub2-common (2.02~beta2-36ubuntu3.18) over (2.02~beta2-36ubuntu3.17) ...
Preparing to unpack .../grub-common_2.02~beta2-36ubuntu3.18_amd64.deb ...
Unpacking grub-common (2.02~beta2-36ubuntu3.18) over (2.02~beta2-36ubuntu3.17) ...
Preparing to unpack .../gpgv_1.4.20-1ubuntu3.2_amd64.deb ...
Unpacking gpgv (1.4.20-1ubuntu3.2) over (1.4.20-1ubuntu3.1) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for install-info (6.1.0.dfsg.1-5) ...
Processing triggers for systemd (229-4ubuntu21.2) ...
Processing triggers for ureadahead (0.100.0-19) ...
Errors were encountered while processing:
 /var/cache/apt/archives/linux-image-4.4.0-128-generic_4.4.0-128.154_amd64.deb
 /var/cache/apt/archives/linux-image-4.4.0-124-generic_4.4.0-124.148_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
      posted in FOG Problems
      B
      BREIT
    • Update failed do to wget

      Hey guys,

      I am attempting to update to 1.5.4 from 1.5.2 and I am unable to do so. The installer attempts to install a new wget which fails causing the whole update to fail at Installing now everything is updated. Below is the log.

      

   +------------------------------------------+
   |     ..#######:.    ..,#,..     .::##::.  |
   |.:######          .:;####:......;#;..     |
   |...##...        ...##;,;##::::.##...      |
   |   ,#          ...##.....##:::##     ..:: |
   |   ##    .::###,,##.   . ##.::#.:######::.|
   |...##:::###::....#. ..  .#...#. #...#:::. |
   |..:####:..    ..##......##::##  ..  #     |
   |    #  .      ...##:,;##;:::#: ... ##..   |
   |   .#  .       .:;####;::::.##:::;#:..    |
   |    #                     ..:;###..       |
   |                                          |
   +------------------------------------------+
   |      Free Computer Imaging Solution      |
   +------------------------------------------+
   |  Credits: http://fogproject.org/Credits  |
   |       http://fogproject.org/Credits      |
   |       Released under GPL Version 3       |
   +------------------------------------------+


   Version: 1.5.4 Installer/Updater


 * Found FOG Settings from previous install at: /opt/fog/.fogsettings

 * Performing upgrade using these settings


  Starting Debian based Installation



   ######################################################################
   #     FOG now has everything it needs for this setup, but please     #
   #   understand that this script will overwrite any setting you may   #
   #   have setup for services like DHCP, apache, pxe, tftp, and NFS.   #
   ######################################################################
   # It is not recommended that you install this on a production system #
   #        as this script modifies many of your system settings.       #
   ######################################################################
   #             This script should be run by the root user.            #
   #      It will prepend the running with sudo if root is not set      #
   ######################################################################
   #           ** Notice ** FOG is difficult to setup securely          #
   #        SELinux and IPTables are usually asked to be disabled       #
   #           There have been strides in adding capabilities           #
   #          The recommendations would now be more appropriate         #
   #    to set SELinux to permissive and to disable firewall for now.   #
   #  You can find some methods to enable SELinux and maintain firewall #
   #   settings and ports. If you feel comfortable doing so please do   #
   ######################################################################
   #            Please see our wiki for more information at:            #
   ######################################################################
   #             https://wiki.fogproject.org/wiki/index.php             #
   ######################################################################

 * Here are the settings FOG will use:
 * Base Linux: Debian
 * Detected Linux Distribution: Ubuntu
 * Server IP Address: XXXXXXXXXXXXXX
 * Server Subnet Mask :XXXXXXXXXXXXX
 * Interface: ens192
 * Installation Type: Normal Server
 * Internationalization: 0
 * Image Storage Location: /images
 * Using FOG DHCP: No
 * DHCP will NOT be setup but you must setup your
 | current DHCP server to use FOG for PXE services.

 * On a Linux DHCP server you must set: next-server and filename

 * On a Windows DHCP server you must set options 066 and 067

 * Option 066/next-server is the IP of the FOG Server: (e.g. xxxxxxxxxxxxxx)
 * Option 067/filename is the bootfile: (e.g. undionly.kpxe)


 * Are you sure you wish to continue (Y/N) Y

 * Installation Started

 * Installing required packages, if this fails
 | make sure you have an active internet connection.

 * Adding needed repository....................................OK
 * Preparing Package Manager...................................OK
 * Packages to be installed:

        apache2 bc build-essential cpp curl g++ gawk gcc gzip htmldoc lftp libapache2-mod-php7.1 libc6 libcurl3 m4 mysql-client mysql-server net-tools nfs-kernel-server openssh-server php7.1 php7.1-bcmath php7.1-cli php7.1-curl php7.1-fpm php7.1-gd php7.1-json php7.1-ldap php7.1-mbstring php7.1-mcrypt php7.1-mysql php-gettext sysv-rc-conf tar tftpd-hpa tftp-hpa unzip vsftpd wget xinetd zlib1g


 * Skipping package:   apache2.................................(Already Installed)
 * Skipping package:   bc......................................(Already Installed)
 * Skipping package:   build-essential.........................(Already Installed)
 * Skipping package:   cpp.....................................(Already Installed)
 * Skipping package:   curl....................................(Already Installed)
 * Skipping package:   g++.....................................(Already Installed)
 * Skipping package:   gawk....................................(Already Installed)
 * Skipping package:   gcc.....................................(Already Installed)
 * Skipping package:   gzip....................................(Already Installed)
 * Skipping package:   htmldoc.................................(Already Installed)
 * Skipping package:   lftp....................................(Already Installed)
 * Skipping package:   libapache2-mod-php7.1...................(Already Installed)
 * Skipping package:   libc6...................................(Already Installed)
 * Skipping package:   libcurl3................................(Already Installed)
 * Skipping package:   m4......................................(Already Installed)
 * Skipping package:   mysql-client............................(Already Installed)
 * Skipping package:   mysql-server............................(Already Installed)
 * Skipping package:   net-tools...............................(Already Installed)
 * Skipping package:   nfs-kernel-server.......................(Already Installed)
 * Skipping package:   openssh-server..........................(Already Installed)
 * Skipping package:   php7.1..................................(Already Installed)
 * Skipping package:   php7.1-bcmath...........................(Already Installed)
 * Skipping package:   php7.1-cli..............................(Already Installed)
 * Skipping package:   php7.1-curl.............................(Already Installed)
 * Skipping package:   php7.1-fpm..............................(Already Installed)
 * Skipping package:   php7.1-gd...............................(Already Installed)
 * Skipping package:   php7.1-json.............................(Already Installed)
 * Skipping package:   php7.1-ldap.............................(Already Installed)
 * Skipping package:   php7.1-mbstring.........................(Already Installed)
 * Skipping package:   php7.1-mcrypt...........................(Already Installed)
 * Skipping package:   php7.1-mysql............................(Already Installed)
 * Skipping package:   php-gettext.............................(Already Installed)
 * Skipping package:   sysv-rc-conf............................(Already Installed)
 * Skipping package:   tar.....................................(Already Installed)
 * Skipping package:   tftpd-hpa...............................(Already Installed)
 * Skipping package:   tftp-hpa................................(Already Installed)
 * Skipping package:   unzip...................................(Already Installed)
 * Skipping package:   vsftpd..................................(Already Installed)
 * Installing package: wget....................................Failed! (Will try later)
 * Skipping package:   xinetd..................................(Already Installed)
 * Skipping package:   zlib1g..................................(Already Installed)
 * Updating packages as needed.................................OK
 * Installing now everything is updated........................Failed!
      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      Hey guys. So I’ve attempted to register a computer this morning with a m.2 hard drive and got the same error message. Just wanted to pass that information along.

      I overlooked switching to ACHI on this computer. DOH!

      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      @Sebastian-Roth

      That did not work. Same error message comes up.

      I did notice this line when booting kernel

      populating /dev using udev: udevd[[3096]: error creating epoll fd: Function not implemented
      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      @sebastian-roth said in Hard Drive, SSD, & M.2:

      nvme_load=YES

      Sorry I need a little clarification, I go to the host on the web interface and type in nvme_load=YES in the Host Kernel Arguments?

      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      After even more digging. There is something hardware related that FOG doesn’t like or isn’t seeing. I put the SED drive into a MMF Dell 7050 and it started imaging without any issues. Maybe its the new quick swap device on it?

      I will add due to hardware differences the image crashed upon loading into windows 7 (Yeah I know windows 7)

      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      @george1421

      Any ideas on how to get this working?

      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      @breit said in Hard Drive, SSD, & M.2:

      b3:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804]
      Subsystem: Samsung Electronics Co Ltd Device [144d:a801]
      Kernel driver in use: nvme
      Kernel modules: nvme

      I haven’t done a full comparison of the two lspci files yet but just a quick look the last line above is missing from the FOG lspci data. Maybe its not loading that controller and Fedora is?

      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      /var/log/message Here

      posted in FOG Problems
      B
      BREIT
    • RE: Hard Drive, SSD, & M.2

      @george1421
      BzImage info:

      bzImage: Linux kernel x86 boot executable bzImage, version 4.15.2 (builder@c38bc 0acaeb4) #5 SMP Tue Feb 13 18:30:08 UTC 20, RO-rootFS, swap_dev 0x7, Normal VGA

      lspci -knn info:

      00:00.0 Host bridge [0600]: Intel Corporation Sky Lake-E DMI3 Registers [8086:2020] (rev 04)
	Subsystem: Dell Device [1028:0738]
00:04.0 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:04.1 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:04.2 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:04.3 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:04.4 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:04.5 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:04.6 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:04.7 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ioatdma
	Kernel modules: ioatdma
00:05.0 System peripheral [0880]: Intel Corporation Sky Lake-E MM/Vt-d Configuration Registers [8086:2024] (rev 04)
	Subsystem: Dell Device [1028:0738]
00:05.2 System peripheral [0880]: Intel Corporation Device [8086:2025] (rev 04)
00:05.4 PIC [0800]: Intel Corporation Device [8086:2026] (rev 04)
	Subsystem: Dell Device [1028:0738]
00:08.0 System peripheral [0880]: Intel Corporation Sky Lake-E Ubox Registers [8086:2014] (rev 04)
	Subsystem: Dell Device [1028:0738]
00:08.1 Performance counters [1101]: Intel Corporation Sky Lake-E Ubox Registers [8086:2015] (rev 04)
	Subsystem: Dell Device [1028:0738]
00:08.2 System peripheral [0880]: Intel Corporation Sky Lake-E Ubox Registers [8086:2016] (rev 04)
	Subsystem: Dell Device [1028:0738]
00:14.0 USB controller [0c03]: Intel Corporation 200 Series PCH USB 3.0 xHCI Controller [8086:a2af]
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation 200 Series PCH Thermal Subsystem [8086:a2b1]
	Subsystem: Dell Device [1028:0738]
00:16.0 Communication controller [0780]: Intel Corporation 200 Series PCH CSME HECI #1 [8086:a2ba]
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation 200 Series PCH SATA controller [AHCI mode] [8086:a282]
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #1 [8086:a290] (rev f0)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #7 [8086:a296] (rev f0)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a2d3]
	Subsystem: Dell Device [1028:0738]
00:1f.2 Memory controller [0580]: Intel Corporation 200 Series PCH PMC [8086:a2a1]
	Subsystem: Dell Device [1028:0738]
00:1f.3 Audio device [0403]: Intel Corporation 200 Series PCH HD Audio [8086:a2f0]
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 200 Series PCH SMBus Controller [8086:a2a3]
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (5) I219-LM [8086:15e3]
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: e1000e
	Kernel modules: e1000e
02:00.0 PCI bridge [0604]: Texas Instruments XIO2001 PCI Express-to-PCI Bridge [104c:8240]
	Kernel modules: shpchp
16:05.0 System peripheral [0880]: Intel Corporation Device [8086:2034] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:05.2 System peripheral [0880]: Intel Corporation Sky Lake-E RAS Configuration Registers [8086:2035] (rev 04)
16:05.4 PIC [0800]: Intel Corporation Device [8086:2036] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.4 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.5 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.6 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:08.7 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:09.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:09.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.4 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.5 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.6 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0e.7 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0f.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:0f.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1d.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2054] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1d.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2055] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1d.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2056] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1d.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2057] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1e.0 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2080] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1e.1 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2081] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1e.2 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2082] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1e.3 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2083] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1e.4 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2084] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1e.5 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2085] (rev 04)
	Subsystem: Dell Device [1028:0738]
16:1e.6 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2086] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:00.0 PCI bridge [0604]: Intel Corporation Sky Lake-E PCI Express Root Port A [8086:2030] (rev 04)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
64:05.0 System peripheral [0880]: Intel Corporation Device [8086:2034] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:05.2 System peripheral [0880]: Intel Corporation Sky Lake-E RAS Configuration Registers [8086:2035] (rev 04)
64:05.4 PIC [0800]: Intel Corporation Device [8086:2036] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:08.0 System peripheral [0880]: Intel Corporation Device [8086:2066] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:09.0 System peripheral [0880]: Intel Corporation Device [8086:2066] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:0a.0 System peripheral [0880]: Intel Corporation Device [8086:2040] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0a.1 System peripheral [0880]: Intel Corporation Device [8086:2041] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0a.2 System peripheral [0880]: Intel Corporation Device [8086:2042] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:0a.3 System peripheral [0880]: Intel Corporation Device [8086:2043] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0a.4 System peripheral [0880]: Intel Corporation Device [8086:2044] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0a.5 System peripheral [0880]: Intel Corporation Device [8086:2045] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0a.6 System peripheral [0880]: Intel Corporation Device [8086:2046] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:0a.7 System peripheral [0880]: Intel Corporation Device [8086:2047] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0b.0 System peripheral [0880]: Intel Corporation Device [8086:2048] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0b.1 System peripheral [0880]: Intel Corporation Device [8086:2049] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0b.2 System peripheral [0880]: Intel Corporation Device [8086:204a] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:0b.3 System peripheral [0880]: Intel Corporation Device [8086:204b] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0c.0 System peripheral [0880]: Intel Corporation Device [8086:2040] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0c.1 System peripheral [0880]: Intel Corporation Device [8086:2041] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0c.2 System peripheral [0880]: Intel Corporation Device [8086:2042] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:0c.3 System peripheral [0880]: Intel Corporation Device [8086:2043] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0c.4 System peripheral [0880]: Intel Corporation Device [8086:2044] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0c.5 System peripheral [0880]: Intel Corporation Device [8086:2045] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0c.6 System peripheral [0880]: Intel Corporation Device [8086:2046] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:0c.7 System peripheral [0880]: Intel Corporation Device [8086:2047] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0d.0 System peripheral [0880]: Intel Corporation Device [8086:2048] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0d.1 System peripheral [0880]: Intel Corporation Device [8086:2049] (rev 04)
	Subsystem: Dell Device [1028:0738]
64:0d.2 System peripheral [0880]: Intel Corporation Device [8086:204a] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
64:0d.3 System peripheral [0880]: Intel Corporation Device [8086:204b] (rev 04)
	Subsystem: Dell Device [1028:0738]
65:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP107GL [Quadro P600] [10de:1cb2] (rev a1)
	Subsystem: Dell Device [1028:11bd]
	Kernel driver in use: nouveau
	Kernel modules: nouveau
65:00.1 Audio device [0403]: NVIDIA Corporation GP107GL High Definition Audio Controller [10de:0fb9] (rev a1)
	Subsystem: Dell Device [1028:11bd]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
b2:02.0 PCI bridge [0604]: Intel Corporation Sky Lake-E PCI Express Root Port C [8086:2032] (rev 04)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
b2:03.0 PCI bridge [0604]: Intel Corporation Sky Lake-E PCI Express Root Port D [8086:2033] (rev 04)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
b2:05.0 System peripheral [0880]: Intel Corporation Device [8086:2034] (rev 04)
	Subsystem: Dell Device [1028:0738]
b2:05.2 System peripheral [0880]: Intel Corporation Sky Lake-E RAS Configuration Registers [8086:2035] (rev 04)
b2:05.4 PIC [0800]: Intel Corporation Device [8086:2036] (rev 04)
	Subsystem: Dell Device [1028:0738]
b2:12.0 Performance counters [1101]: Intel Corporation Sky Lake-E M3KTI Registers [8086:204c] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
b2:12.1 Performance counters [1101]: Intel Corporation Sky Lake-E M3KTI Registers [8086:204d] (rev 04)
	Subsystem: Dell Device [1028:0738]
	Kernel driver in use: skx_uncore
b2:12.2 System peripheral [0880]: Intel Corporation Sky Lake-E M3KTI Registers [8086:204e] (rev 04)
	Subsystem: Dell Device [1028:0738]
b2:15.0 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04)
	Subsystem: Dell Device [1028:0738]
b2:16.0 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04)
	Subsystem: Dell Device [1028:0738]
b2:16.4 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04)
	Subsystem: Dell Device [1028:0738]
b2:17.0 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04)
b3:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804]
	Subsystem: Samsung Electronics Co Ltd Device [144d:a801]
	Kernel driver in use: nvme
	Kernel modules: nvme
      posted in FOG Problems
      B
      BREIT
    • 1 / 1