I found a solution. I am using WinNTsetup4 which I run from winPE and it works. I don’t know what else he does but it works so I won’t look. Thank you for helping me !

i solved my problem using undionly.kpxe file from a debian 10.4

Hi all,
I have 2 lan in my local network which communicate well with each other.
There is a dhcp server in each lan.
LAN1 = 172.16.0.0/16 and LAN2 = 192.168.10.0 / 24.
But my servers can’t boot in ipxe, they can’t access the dhcp server on LAN1. How to do ?
Thank you !

I found a solution. I am using WinNTsetup4 which I run from winPE and it works. I don’t know what else he does but it works so I won’t look. Thank you for helping me !

@george1421 same probleme whether on physical machines or hyper-v virtual machines. And I am in IDE and not in AHCI in both cases

@george1421 I have something new.
I recreated a winpe image with adk under windows 8.
This time when I run winnt32 I can start the installation, as the screenshot shows :

BUT after 2 or 3 minutes I automatically come back on the winpe command prompt …

@george1421 in fact, I have the impression that when I want to start the installation of XP with the iso from a minimum vista machine, it does not work. From a machine already in XP, ok, the line is not grayed out. How then to start installations of XP from winPE?

@george1421 I test on several different machines (HP, dell, …) and also on virtual machines on hyper-v. Always the same problem

@Tom-Elliott yes I can install XP with this iso

@Tom-Elliott the iso is 600MB and the machines are 4GB

@george1421 no need for the -n switch, the winpe boot in legacy as well as uefi.
I can see the disk and partitions from winPE (verified with diskpart).
I do a clean on the disk.
I try to install XP in pxe from several different workstations and I also test on hyper-v virtual machines.
Always the same problem…

@george1421 thank you very much for your reply.
In fact, I don’t see concretely what is FOG used for compared to ipxe?
Currently I have my ipxe which is on my dhcp server and which will look for the installations which are on my nfs server.
I don’t have a web user interface.
Here my ipxe config (sorry in french) :
UI on boot pxe :
And my problem setup XP on winPE :