@george1421 Managed to get it fixed.
I followed these insturctions and found out that I had the 066 was not selected 
https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence
thanks a lot for the help and keep up the good work.
Wishing a great Christmas and New year to all the team, and to your families and loves ones!
@sebastian-roth said in Changing hostname from fog broken:
http://fog/fog/management/ - doesnt seem to open
http://192.168.0.58/fog/management - works
however when I ping fog I get a reply
I only got 1 fog server
Command as requested:
root@fog:~# ls -al /var/www/{,html}
/var/www/:
total 16
drwxr-xr-x 4 root root 4096 Jan 29 2019 .
drwxr-xr-x 15 root root 4096 Jan 29 2019 ..
drwxr-xr-x 11 www-data www-data 4096 Jan 29 2019 fog
drwxr-xr-x 3 root root 4096 Mej 26 12:24 html
/var/www/html:
total 28
drwxr-xr-x 3 root root 4096 Mej 26 12:24 .
drwxr-xr-x 4 root root 4096 Jan 29 2019 ..
drwxr-xr-x 10 www-data www-data 4096 Mej 26 12:26 fog
-rw-r--r-- 1 root root 10918 Jan 29 2019 index.html
-rw-r--r-- 1 www-data www-data 52 Ott 8 2020 index.php
root@fog:~#
@dejv changed php version as you instructed, redownloaded latest version, installed and is working ok thanks a lot 
I have a server snapshot before the upgrade, I think I will revert back to it and then when it is nearly out of support will backup everything and do a fresh os installation
Aww 08 15:43:13 fog systemd[1]: FOGImageSize.service: Main process exited, code=exited, status=255/EXCEPTION
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ An ExecStart= process belonging to unit FOGImageSize.service has exited.
░░
░░ The process’ exit code is ‘exited’ and its exit status is 255.
Aww 08 15:43:13 fog systemd[1]: FOGImageSize.service: Failed with result ‘exit-code’.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ The unit FOGImageSize.service has entered the ‘failed’ state with result ‘exit-code’.
Aww 08 15:43:13 fog systemd[1]: FOGMulticastManager.service: Main process exited, code=exited, status=255/EXCEPTION
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ An ExecStart= process belonging to unit FOGMulticastManager.service has exited.
░░
░░ The process’ exit code is ‘exited’ and its exit status is 255.
Aww 08 15:43:13 fog systemd[1]: FOGMulticastManager.service: Failed with result ‘exit-code’.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ The unit FOGMulticastManager.service has entered the ‘failed’ state with result ‘exit-code’.
Aww 08 15:43:13 fog systemd[1]: FOGScheduler.service: Main process exited, code=exited, status=255/EXCEPTION
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ An ExecStart= process belonging to unit FOGScheduler.service has exited.
░░
░░ The process’ exit code is ‘exited’ and its exit status is 255.
Aww 08 15:43:13 fog systemd[1]: FOGScheduler.service: Failed with result ‘exit-code’.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ The unit FOGScheduler.service has entered the ‘failed’ state with result ‘exit-code’.
Aww 08 15:43:13 fog systemd[1]: FOGSnapinReplicator.service: Main process exited, code=exited, status=255/EXCEPTION
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ An ExecStart= process belonging to unit FOGSnapinReplicator.service has exited.
░░
░░ The process’ exit code is ‘exited’ and its exit status is 255.
Aww 08 15:43:13 fog systemd[1]: FOGSnapinReplicator.service: Failed with result ‘exit-code’.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ The unit FOGSnapinReplicator.service has entered the ‘failed’ state with result ‘exit-code’.
lines 3405-3460/3460 (END)
Also when running
sudo apachectl configtest
I was getting :
fog apachectl[941]: AH00558: apache2: Could not reliably determine the server’s fully qualified domain name, using 127.0.1.1. Set the ‘ServerName’ directive globally to suppress this message
So had to add the below command
sudo nano /etc/httpd/conf/httpd.conf
and added : ServerName 127.0.0.1
root@fog:~# sudo apachectl configtest
Syntax OK
Now am getting :
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.4.52 (Ubuntu) Server at 192.168.0.58 Port 80
I performed the below commands and now
sudo a2dismod php7.4
sudo a2enmod php8.1
systemctl restart apache2
and now on the web I am getting:
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.4.52 (Ubuntu) Server at 192.168.0.58 Port 80
@Tom-Elliott seems to be an apache related issue :s tried starting it manually and am getting the below error
root@fog:~# systemctl status apache2.service
× apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Tue 2023-08-08 12:40:08 CEST; 15s ago
Docs: https://httpd.apache.org/docs/2.4/
Process: 104535 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
CPU: 120ms
Aww 08 12:40:07 fog systemd[1]: Starting The Apache HTTP Server…
Aww 08 12:40:08 fog apachectl[104538]: apache2: Syntax error on line 146 of /etc/apache2/apache2.conf: Syntax error on line 3 of /etc/apache2/mods-enabled/php7.4.load: Cannot load /usr/lib/apache2/modules/libphp>
Aww 08 12:40:08 fog apachectl[104535]: Action ‘start’ failed.
Aww 08 12:40:08 fog apachectl[104535]: The Apache error log may have more information.
Aww 08 12:40:08 fog systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
Aww 08 12:40:08 fog systemd[1]: apache2.service: Failed with result ‘exit-code’.
Aww 08 12:40:08 fog systemd[1]: Failed to start The Apache HTTP Server.
Hey, issues again, yesterday I updated my ubuntu version from 20.04.6lts to 22.04.2lts however now fog is not loading :S
I checked and apache seems to be running :S any ideas
@george1421 mainly I wanted to select raid on so that if a laptop hass issues and looses bios settings it will still work 
Example I have a couple of HP laptops that for some reason if left not being used for a couple of days they loose bios settings even if they have battery life :S
@george1421 I changed the option back from ahci to raid on exactly after image has been deployed.
However I laptop is not booting. Is there any easy way to do this without taking too much time or maybe someone to automate it?
@george1421 Managed to get it fixed.
I followed these insturctions and found out that I had the 066 was not selected
https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence
thanks a lot for the help and keep up the good work.
Wishing a great Christmas and New year to all the team, and to your families and loves ones!
@george1421 I am on leave and will be back on wed to try it out.