Hello,
Following the resolution of my legacy uefi boot problem.
thank you @george1421 !!
I find myself facing a problem of boot on my server “ltsp ubuntu”
In my ipxe menu I have:
set net0/next-server 10.20.11.203
set net0/filename ltsp/amd64/pxelinux.0
chain tftp://10.20.11.203/ltsp/amd64/pxelinux.0
which allows me to boot on my server ltsp legacy but from a pc in uefi it does not work …
An idea of the problem ???
Thank you
Best regard
@george1421
Thank you so much !
It works well !
Have a good day.
@george1421 Bonjour,
I have a problem with line 38.
● dnsmasq.service - dnsmasq - A lightweight DHCP and caching DNS server
Loaded: loaded (/lib/systemd/system/dnsmasq.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Thu 2019-12-05 18:18:29 CET; 4s ago
Process: 13554 ExecStop=/etc/init.d/dnsmasq systemd-stop-resolvconf (code=exited, status=0/SUCCESS)
Process: 13988 ExecStart=/etc/init.d/dnsmasq systemd-exec (code=exited, status=1/FAILURE)
Process: 13987 ExecStartPre=/usr/sbin/dnsmasq --test (code=exited, status=0/SUCCESS)
Main PID: 13206 (code=exited, status=0/SUCCESS)
déc. 05 18:18:29 11fog1 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server…
déc. 05 18:18:29 11fog1 dnsmasq[13987]: dnsmasq: vérification de syntaxe OK.
déc. 05 18:18:29 11fog1 dnsmasq[13988]: dnsmasq: mauvaise plage d’adresses DHCP (dhcp-range) at line 38 of /etc/dnsmasq.d/ltsp.conf
déc. 05 18:18:29 11fog1 systemd[1]: dnsmasq.service: Control process exited, code=exited status=1
déc. 05 18:18:29 11fog1 dnsmasq[13988]: mauvaise plage d’adresses DHCP (dhcp-range) at line 38 of /etc/dnsmasq.d/ltsp.conf
déc. 05 18:18:29 11fog1 systemd[1]: dnsmasq.service: Failed with result ‘exit-code’.
déc. 05 18:18:29 11fog1 dnsmasq[13988]: IMPOSSIBLE de démarrer
déc. 05 18:18:29 11fog1 systemd[1]: Failed to start dnsmasq - A lightweight DHCP and caching DNS server.
Here is my line 38:
dhcp-range = <10.20.11.201> Proxy
10.20.11.201 is my FOG server.
If I delete this line dnsmasq works but the computers do not boot.
If you have an idea ??
Best regards
@ george1421 Thank you very much for your answers.
I test it is I come back to you.
Have a good day
Best regards
Hello,
For several years I use fog to deploy windows and linux images on my computer and I am currently experiencing a problem.
I use a router mikrotik (router OS) as a DHCP server and I found that by filling in the file: “undionly.kpxe” computers could boot into legacy and informing “ipxe.efi” in uefi.
I would like to boot automatically on one or the other.
But how to do it ?? An idea ??
Have a good day
Best regards
@george1421 C’est bon j’ai trouvé !!!
J’ai remplis ceci dans le menu IPEX de FOG :
It’s good I found !!!
I filled this out in the FOG IPEX menu:
set net0/next-server 10.20.14.210
set net0/filename ltsp/amd64/pxelinux.0
chain tftp://10.20.14.210/ltsp/amd64/pxelinux.0
Et la !! ça marche !!!
Merci beaucoup pour votre réactivité et surtout pour le temps passé !!
Bonne soirée
@@@+++
And the !! it works !!!
Thank you very much for your responsiveness and especially for the time spent!
Good night
@@@+++
@george1421 Je précise que quand mon serveur LTSP démarre (sans passer par fog) j’ai ceci qui s’affiche :
I specify that when my LTSP server starts (without going through fog) I have this displayed:
Si ça peux aider
If it helps
@franck25 depuis une machine virtuel et physique même résultat.
@george1421 Ok je comprend le principe. Merci pour l’explication.
On avance mais il y a tjs quelque chose qui bloque…
Ok I understand the principle. Thanks for the explanation.
In advance but there is something that has chosen to block …
Pour :
For :
set 209:string ltsp/amd64/pxelinux.0
set 210:string tftp://10.20.14.210
chain tftp://10.20.14.210/ltsp/amd64/pxelinux.0
Message erreur : Failed to load ldlinux.c32
Pour :
For :
set pxeserver:ipv4 10.20.14.210
set next-server ${pxeserver}
chain tftp://${pxeserver}/ltsp/amd64/pxelinux.0
La un peut bizarre, quand je valide LTSP dans le menu fog. je vois une fraction de seconde un menu pxe à l’ancienne avec dans le menu un onglet fog (impossible de vous faire un imprime ecran ca va trop vite) et le pc relance un boot en pxe.
Bien cordialement
One can be odd, when I validate LTSP in the fog menu. I see a fraction of a second old pxe menu with a fog tab in the menu (you can not print a screen that goes too fast) and the pc restart a boot in pxe.
Best regards
@george1421 J’ai refait le test :
I redid the test:
set net0/next-server 10.20.14.210
set filename ltsp/amd64/pxelinux.0
chain tftp://10.20.14.210/ltsp/amd64/pxelinux.0
Erreur :
Je vous fait une petite copie du répertoire /var/lib/tftpboot/ltsp/amd64 :
I give you a little copy of the repertoire /var/lib/tftpboot/ltsp/amd64 :
srv-ltsp@srvltsp:/var/lib/tftpboot/ltsp/amd64$ ls -lh
total 71M
-rw-r–r-- 1 root root 212K févr. 7 12:10 config-4.18.0-15-generic
-rw-r–r-- 1 root root 104K mai 24 18:07 gpxelinux.0
drwxr-xr-x 5 root root 4,0K mai 24 17:30 grub
lrwxrwxrwx 1 root root 28 mai 24 18:12 initrd.img -> initrd.img-4.18.0-15-generic
-rw-r–r-- 1 root root 58M mai 24 18:08 initrd.img-4.18.0-15-generic
lrwxrwxrwx 1 root root 28 mai 24 18:13 initrd.img-generic -> initrd.img-4.18.0-15-generic
-rw-r–r-- 1 root root 114K mai 24 18:07 ldlinux.c32
-rw-r–r-- 1 root root 2,6K mai 24 18:13 lts.conf
-rw-r–r-- 1 root root 179K janv. 28 2016 memtest86+.bin
-rw-r–r-- 1 root root 181K janv. 28 2016 memtest86+.elf
-rw-r–r-- 1 root root 181K janv. 28 2016 memtest86+_multiboot.bin
-rw-r–r-- 1 root root 41K mai 24 18:07 pxelinux.0
drwxr-xr-x 2 root root 4,0K mai 24 18:13 pxelinux.cfg
-rw-r–r-- 1 root root 4,1M févr. 7 12:10 System.map-4.18.0-15-generic
lrwxrwxrwx 1 root root 25 mai 24 18:12 vmlinuz -> vmlinuz-4.18.0-15-generic
-rw-r–r-- 1 root root 8,2M févr. 10 01:25 vmlinuz-4.18.0-15-generic
lrwxrwxrwx 1 root root 25 mai 24 18:13 vmlinuz-generic -> vmlinuz-4.18.0-15-generic
Si ça peut vous aidez.
If it can help you.