@george1421 said in Multicast stuck:

[09-18-24 9:36:35 am] Interface not ready, waiting for it to come up: 10.54.68.101
[09-18-24 9:36:45 am] Interface not ready, waiting for it to come up: 10.54.68.101
[09-18-24 9:36:55 am] Interface not ready, waiting for it to come up: 10.54.68.101

If you disable the storage node then you will get this message inside the log.

I found out that it wasn’t a FOG problem but i mixed up some vlans together.
Multicast works now. Problem solved.

@george1421 said in ASUS NUC14MNK fos kernel no netwerk drivers:

@Eazis will you check to see if the beta version 6.12.x series fixes the issue? https://github.com/FOGProject/fos/releases

If not we will need compile a special kernel with the current realtek driver installed. The linux mainstream kernel drivers typically lags current hardware.

I will try tomorrow and let you know.

@george1421

This did the trick!
So the 8125 driver was missing?

@Tom-Elliott said in ASUS NUC14MNK fos kernel no netwerk drivers:

@Eazis YEah, my suspicions correct, this far at least.

You can try downloading rod’s latest kernel:
https://github.com/rluzuriaga/fos/releases/download/EXP_20250617/bzImage

I doubt it will work, but who knows…

Here have anyone the same problem within linuxmint. Are you sure you have the correct driver added?

https://forums.linuxmint.com/viewtopic.php?p=2577017#p2577017

@Tom-Elliott Sorry for the delay. Yesterday i was out of the office.
I got now other erros too with this FOS kernel.

@Tom-Elliott

@Tom-Elliott Is there anything i can do for you? Maybe we can chat anywhere?

@Tom-Elliott Is there any other we could try?

@Tom-Elliott

All 3 commands didn’t work.
Here is a output from /sbin/ip addr
I have also added a screenshot from my BIOS, i hope that helps
NOTE: the enp0s20f0u7 is a USB->NIC adapter i need this to go into the FOS kernel. So normally this USB->NIC adapter is not connected to the system.

@george1421

Here you go. I have done this with the FOS kernel which Tom have created.
The enp0s20f0u7 which you see is my usb -> nic adapter, otherwise i cant start a deploy task.

@Tom-Elliott

Thanks i tried your version but now i got this inside the FOS kernel.
The normal FOS kernel can boot into other pc’s except for the ASUS NUC.

@george1421 said in ASUS NUC14MNK fos kernel no netwerk drivers:

@Eazis Ok A little google-fu shows this is not an 8169 nic but a 8125 (2.5GbE) nic. (I personally really dislike realtek because of this BS).

So now we need to figure out how to add 8125 native nic support to the FOS kernel.

It seems the FOS kernel is misleading us
Windows already reports the hardware ID as 8125.

Is there any chance of getting this driver included in the FOS kernel?

For now, I have a workaround using USB-to-LAN to boot into FOS, but it’s far from ideal.
MAC address swapping inside the GUI etc.