Hi, i have some several issues (this thread: https://forums.fogproject.org/topic/8323/several-problems-with-surface-pro-4)

Had that problem with the dark screen too. I’ve used the bootfile ipxe7156.efi then the problem with the dark screen disappeard. (still have other problems, but i think you should give it a try )

Here are the steps wich resolved the issues:

@jhuesser said in Several problems with Surface Pro 4:

• If i select an entry the display just goes dark, nothing happens

Use intel7156.efi

• If i select Boot from harddisk REFIND_EFI starts, i need to press a key and then windows tries to boot but get stuck at the windows logo. (no problem if i boot without pxe)

Use intel7156.efi

• If a task is assigned it get stuck at

bzImage... ok
init.xz... ok

Use intel7156.efi

• Perform Full Host Registration and Inventory & Quick registration doesn’t work (Select menu entry -> screen goes dark; Quick registration -> chainload failed).

manually add the host and add has_usb_nic=1 to the host settings. (also for dhcp error in FOS)

@jhuesser said in Several problems with Surface Pro 4:

@george1421 It doesn’t recognize the keyboard at this point. (…)

Use an USB-Keyboard with an USB-Hub

@Sebastian-Roth Am I right, if i used the USB keyboard at the beginning, there is no need to modify the initrd to remove the keyboard interaction?

@Tom-Elliott said in Several problems with Surface Pro 4:

@george1421 lshw lsusb lspci dmesg

Personally, dmesg will probably be of more use as even if the kernel doesn’t have drivers we should see the device in the list on load up.

Should i execute dmesg on a ubuntu bootet on the SP4 or in the FOS Engine?

@sebastian-roth Thank you, will keep that in mind.

Just a small update:

In my solution post i wrote, that I’ve used intel7156.efi as bootfile. Just tried to image again and iPXE couldn’t get a DHCP address. So now I used ipxe7156.efi and it seems to work fine.

I needed to register the host manually and set the has_usb_nic=1 option in the host settings, try this after updating fog.

This is the output of the dmesgcommand, once in Ubuntu on the SP4 and once in FOS.

(I wanted to upload it here, Got an error “You have not enough privileges”)

dmesg output on google drive

@Quazz Will do it tomorrow, right now the Surface is getting imaged, and it takes a bit long (old USB HUB)

Here are the steps wich resolved the issues:

@jhuesser said in Several problems with Surface Pro 4:

• If i select an entry the display just goes dark, nothing happens

Use intel7156.efi

• If i select Boot from harddisk REFIND_EFI starts, i need to press a key and then windows tries to boot but get stuck at the windows logo. (no problem if i boot without pxe)

Use intel7156.efi

• If a task is assigned it get stuck at

bzImage... ok
init.xz... ok

Use intel7156.efi

• Perform Full Host Registration and Inventory & Quick registration doesn’t work (Select menu entry -> screen goes dark; Quick registration -> chainload failed).

manually add the host and add has_usb_nic=1 to the host settings. (also for dhcp error in FOS)

@jhuesser said in Several problems with Surface Pro 4:

@george1421 It doesn’t recognize the keyboard at this point. (…)

Use an USB-Keyboard with an USB-Hub

@Sebastian-Roth Am I right, if i used the USB keyboard at the beginning, there is no need to modify the initrd to remove the keyboard interaction?

@Tom-Elliott said in Several problems with Surface Pro 4:

@george1421 lshw lsusb lspci dmesg

Personally, dmesg will probably be of more use as even if the kernel doesn’t have drivers we should see the device in the list on load up.

Should i execute dmesg on a ubuntu bootet on the SP4 or in the FOS Engine?

Btw, could succesfully up- and download an image for SP4!

@george1421 It’s the surface pro 4 with the smallest computer power.https://www.microsoft.com/surface/en-us/devices/surface-pro-4#techspec-block the one with the Intel Core m3

I’ve one booted the ubuntu live USB stick. It didn’t recognized the keyboard (and the touchscreen, but that’s not important for FOG i guess).

@Tom-Elliott I’ve used an USB-Keyboard with an USB-Hub and it works!

if i register the other surface with the full host registration i still need the keyboard to enter the details, but as i said with the USB Keyboard it’s fine just as @Sebastian-Roth said in chat. Currently I’m uploading the image, hope that works, so marking this as solved

Thank you all for your help!

I’ve looked into it with @Sebastian-Roth We’ve modifyed the initrd to remove the keyboard interaction (pressing enter to continue). After that the Surface continues with the boot and starts the debut upload task, but because the keyboard doesn’t get recognized, I can’t start the fog script…