@george1421 I ran Wireshark on another machine to capture port 67…
The result shows:

Does this help solve the issue at all??

Jason

@sebastian-roth is there any way to fix this device in ipxe.efi ?? as I know we had good luck with ipxe.efi & REFIND_EFI as the exit type un until now…

Thanks again for your assistance.

Jason

@george1421 So far I have only tested a few of our models… and have had mixed results… some of our older models can not even PXE boot now

ugh
Jason

@george1421 very strange in deed…
Anything you can suggest??

@george1421 Our server is 2012 R2 (I am told)

only issue now so far is if we have bios set to network boot first, once in fog menu, the boot to HDD fails… with every exit type I have tried so far…

Jason

@sebastian-roth We are in process of testing a few other machines…

1 thing I notice on this machine if I PXE boot, but then tell it to boot hard drive it gets stuck on the "rEFInd - initializing… "

I have tried setting the option under this host to just EXIT, as well as GRUB_FIRST_HDD and both have failed as well…

Any other suggestion on that?

We have never had issues booting to HDD after PXE booting when it was set to ipxe.efi and our exit type set to rEFInd

Thanks again for every ones assistance…

Jason

@george1421 So we changed all of our DHCP settings to point to snponly.efi and we are able to pxe boot into FOG…

So a question, once it is able to FOG boot… is there a way (in fog or something) to see the Arch info needed to configure for ipxe.efi?

Thanks again for your assistance

Jason

We just started to get these laptops (HP Probook 450 G8)
These do NOT allow legacy boot in bios…

We can NOT get them to pxe boot…

Here are some screen shots…

We have NO IDEA on what the issue might be… we can pxe boot many other devices… just not this new model…

Thanks in advance for any suggestions

@george1421
I do not want to hijack this post, however I have the same issue and what seems to be similar NIC card (Mine is also Realtek PCIe GBE Family)

If it helps others… here is what this laptop model NIC info shows…

If anyone can assist those of us that have this issue it would be much appreciated!

Thanks

@Sebastian-Roth
Thanks for the reply… sorry I have not responded until now…
Yes we are using 1.5.9

When we do a full registry of a new device through the fog network boot, then if I go in and look at the settings for that device the check box for Name Change/AD Join Force reboot is NOT checked…
And I have no idea what needs to be adjusted within the fog configuration to make this check box be checked by default on ALL new registered devices…

Any further info would be appreciated

Jason