Hosts Sharing USB NIC
-
Thanks, I’ll try this and report back.
-
Well I am trying to update and keep getting to Installing php-gettext…Failed.
I found a thread with something similar but it doesnt help. The thread said to run these commands
sudo apt-get autoremove --purge
sudo rm -rf /etc/php5
sudo rm -rf /etc/apt-get/sources.d/ondrej
sudo apt-get purge php5*
sudo apt-get autoremove --purgeBut the install still fails.
-
@it101 Try to install
gettextbeforehand, and then try the installer again.
sudo apt-get install gettext -
Also, what’s the error when you try it manually?
sudo apt-get install php-gettext -
This post is deleted! -
This is what I get.
sudo apt-get install php-gettext Reading package lists... Done Building dependency tree Reading state information... Done php-gettext is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libapache2-mod-php5 : Depends: apache2-mpm-prefork (> 2.0.52) but it is not going to be installed or apache2-mpm-itk but it is not going to be installed Depends: apache2.2-common but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).I think I’m just going to backup my images and install a fresh 14.4 LTS and FOG 1.3
-
@it101 The instructions you followed weren’t followed properly, from what I can see.
You should’ve ran:
rm -rf /etc/{apache,php}* rm -rf /etc/apt-get/sources.d/ondrej apt-get purge apache2* php5* php7* apt-get autoremove --purgeNotice you must add apache to the list.
Also, the RC-25 should properly handle this installation and changes required properly.
-
@it101 said in Hosts Sharing USB NIC:
I think I’m just going to backup my images and install a fresh 14.4 LTS and FOG 1.3
I would urge you to use Ubuntu 16.04 - it is Canonical’s current long-term-support version of Ubuntu and FOG 1.3.0 installs and runs perfectly fine on it.
-
@Tom-Elliott I ran those commands too and the update fails at the same spot of installing php-gettext, I tried manually installing php-gettext and get the same error as above.
@Wayne-Workman The only reason I said 14.4 LTS is because the wiki says 16 has issues. But with your blessing, I will use 16 LTS.
-
@it101 16 doesn’t have issues anymore (Tom fixed them). What wiki article were you looking at?
-
@it101 What version of FOG are you installing? (SVN, GIT, tarball?)
-
@Wayne-Workman I was looking at This
@Tom-Elliott I am using GIT
-
@it101 Fixed.
-
@Wayne-Workman Can I just install FOG 1.3 on Ubuntu 16 or do I need to install 1.2 first then upgrade to 1.3?
-
@it101 You don’t need to touch 1.2.0 at all, you can go straight to 1.3 using the “Upgrade to Trunk” article, or the “Ubuntu 16.04 Server” article in the wiki. Or, if you just know the commands, you don’t need any instructions. But no you don’t need to mess with 1.2.0 at all. People keep asking that here in the forums and I don’t know why. Is there anything indicating that 1.2.0 is needed? Please point out why you feel that way and I’ll do what I can to change it.
-
@Wayne-Workman I tried installing 1.3 on Ubuntu 16 one time without installing 1.2 first and it didnt ask me about changing the SQL password but did ask if the password was blank. I said yes and it installed without a hitch. But when I went to capture my first image, it couldnt mount the file system and fails immediately
Also, I think some might be taking the “Upgrade to Trunk” at face value thinking it is JUST an upgrade and not a full install.
-
@it101 said in Hosts Sharing USB NIC:
Also, I think some might be taking the “Upgrade to Trunk” at face value thinking it is JUST an upgrade and not a full install.
I’ll clarify this at the very top of the article, then.
when I went to capture my first image, it couldnt mount the file system and fails immediately
Exactly where does this happen? Please post a photo of the error, and if you can please also post a photo what the screen is showing just before the error as well. This will let us know exactly where the issue is.
-
@Wayne-Workman I just tried installing 1.3 on Ubuntu 16 Server and during the install, it fails at
Starting FOGMulticastManager Service ................. Failed!Is this anything to be alarmed at? Proceed as normal?
The only reason I am using Ubuntu is because I am somewhat familiar with it (not saying much) should I try Debian?
-
@it101 Give me 5 minutes to test the latest on Ubuntu 16 here. I’m home today and have lots of time on my hands.
-
@Wayne-Workman OK, so I ran the 1.3 install again after the FOGMulticastManager Service Failed message and it completed successfully.
BUT, when I got to capture my image, I get to “Saving original partition table…” and stops there. No error or anything.
