fog.drivers script will not run correctly in postdownloadscripts

[THEMCV]

@george1421 said in fog.drivers script will not run correctly in postdownloadscripts:

@THEMCV OK what I think I would do at this point is insert a debug pause after the error generator.

#/fog/Drivers/Win7/Latitude E5410/x86
rsync -aqz "$remotedriverpath" "$clientdriverpath" >/dev/null 2>&1
[[! $? -eq 0]] && handleError "Failed to download driver information"

debugPause

After the handleError line after the rsync.

Then go back and schedule a deployment to this computer but pick the debug deployment checkbox.

Then pxe boot the target computer. It will print out a bunch of text but drop you to a command prompt. From there key in fog This will single step you through the deployment process. When you get to the point of the error press crtl-C to exit the installer script. This will leave you at a linux command prompt. From there we should be able to check the disk size and what not.

Okay, done. running the command df I get:

Filesystem                   1K-blocks                Used        Available      Use%      Mounted on
/dev/root                        99459               99440              0         100          / 
10.4.200.150://images/        464307200             215944192        224754688    50          /images

I will run @Tom-Elliot’s code and report back.

[THEMCV]

@Tom-Elliott So this goes into fog.postdownload alone or conjoined with the previous script from ntfs-3g -o force,rw $part /ntfs down?

@Quazz My scripts currently:

#!/bin/sh
## This file serves as a starting point to call your custom postimaging scripts.
## <SCRIPTNAME> should be changed to the script you're planning to use.
## Syntax of post download scripts are
#. ${postdownpath}<SCRIPTNAME>

. ${postdownpath}fog.drivers

and

#!/bin/bash
ceol=`tput el`;
manu=`dmidecode -s system-manufacturer`;
case $manu in
    [Ll][Ee][Nn][Oo][Vv][Oo])
        machine=$(dmidecode -s system-version)
        ;;
    *[Dd][Ee][Ll][Ll]*)
        machine=$(dmidecode -s system-product-name) #pruduct is typo, just realized sorry :(
        ;;
    *)
        machine=$(dmidecode -s system-product-name) # Technically, we can remove the dell one as it's the "default"
        ;;
esac
[[ -z $machine ]] && return #assuming you want it to break if it is not lenovo or dell?
machine="${machine%"${machine##*[![:space:]]}"}" #Removes Trailing Spaces
system64="/ntfs/Windows/SysWOW64/regedit.exe" # sloppy detect if 64bit or not
[[ ! -f $system64 ]] && setarch="x86" || setarch="x64"
#############################################
#this is not section necessary needed, it's just to make the path "human readable"
#rather than using osid for filepath
case $osid in
    5) osn="Win7" ;;
    6) osn="Win8" ;;
    7) osn="Win8.1" ;;
    9) osn="Win10" ;;
esac
#############################################
dots "Preparing Drivers"
# below creates local folder on imaged pc
# this can be anywhere you want just remember
# to make sure it matches throughout!
clientdriverpath="/ntfs/Windows/DRV"
remotedriverpath="/images/drivers/$osn/$machine"
[[ ! -d $clientdriverpath ]] && mkdir -p "$clientdriverpath" >/dev/null 2>&1
echo -n "In Progress"
#there's 3 ways you could handle this,
#driver cab file, extracted driver files or both
#so on the server put extracted driver files to match below folder tree
#i.e. Model Latitude E5410, Windows 7 x86 image would be:
#/fog/Drivers/Win7/Latitude E5410/x86
echo
echo "rsync -aqz \"$remotedriverpath\" \"$clientdriverpath\""
echo
rsync -aqz "$remotedriverpath" "$clientdriverpath"
[[ ! $? -eq 0 ]] && handleError "Failed to download driver information"

debugPause
#if you wanted to use driver.cab use this line below.
#i.e. /fog/Drivers/Win7/Latitude E5410/E5410-Win7-A07-KTT4G.CAB
#cabextract -d "$clientdriverpath" "$remotedriverpath/*.CAB" >/dev/null 2>&1

#if you wanted to mix both cab and extracted use these:
#rsync -aqz --exclude='*.CAB' "$remotedriverpath" "$clientdriverpath" >/dev/null 2>&1
#[[ ! $? -eq 0 ]] && handleError "Failed to sync cab and non-cab drivers"
#cabextract -d "$clientdriverpath" "$remotedriverpath/*.CAB" >/dev/null 2>&1
#[[ ! $? -eq 0 ]] && handleError "Failed to extract cab files"
#this next bit adds driver location on pc to devicepath in registry (so sysprep uses it to reference)
# remember to make devicepath= match the path you've used locally
#also do not remove %SystemRoot%\inf
#and to add more locations just use ; in between each location
regfile="/ntfs/Windows/System32/config/SOFTWARE"
key="\Microsoft\Windows\CurrentVersion\DevicePath"
devpath="%SystemRoot%\inf;%SystemRoot%\DRV";
reged -e "$regfile" &>/dev/null <<EOFREG
ed $key
$devpath
q
y
EOFREG
echo -e "\b\b\b\b\b\b\b\b\b\b\b${ceol}Done"; # this just removes "In Progress and replaces it with done :-)"

[george1421]

@THEMCV please stand by. I think I have a working solution based on tom’s script. I just want to make sure it doesn’t break anything else. I realize we are sending you in 10 different directions, because each has their own way to go about this.

We really need to get a wiki page built with a step by step.

[THEMCV]

@george1421 No problem.

That would be nice though. I had to jump through a few threads (which is a given sometimes!) and the wiki page for Auto Installing drivers didn’t seem as robust as the scripts that I had found.

But that’s how progress and the process work. One problem at a time and always improving.

[george1421]

@THEMCV First understand this this script won’t copy and paste correctly. For some reason the FOG Forum pages eat the spaces around the conditional tests, but I wanted to get it out here for viewing. I’ll upload the file in a minute.

Tom: the only question I have is if NO partitions match will the test if [[ ! $? -eq 0 ]]; then still trap it?

#!/bin/bash
. /usr/share/fog/lib/funcs.sh
[[ -z $postdownpath ]] && postdownpath="/images/postdownloadscripts/"
case $osid in
    5|6|7|9)
        clear
        [[ ! -d /ntfs ]] && mkdir -p /ntfs
        getHardDisk
        if [[ -z $hd ]]; then
            handleError "Could not find hdd to use"

        fi
        getPartitions $hd
        for part in $parts; do
            umount /ntfs >/dev/null 2>&1
            fsTypeSetting "$part"
            case $fstype in
                ntfs)
                    dots "Testing partition $part"
                    ntfs-3g -o force,rw $part /ntfs
                    if [[ ! $? -eq 0 ]]; then
                        echo "Skipped"
                        continue
                    fi
                    if [[ ! -d /ntfs/windows && ! -d /ntfs/Windows && ! -d /ntfs/WINDOWS ]]; then
                        echo "Not found"
                        umount /ntf >/dev/null 2>&1
                        continue
                    fi
                    echo "Success"
                    break
                    ;;
                *)
                    echo " * Partition $part not NTFS filesystem"
                    ;;
            esac
        done
        if [[ ! $? -eq 0 ]]; then
            echo "Failed"
            debugPause
            handleError "Failed to mount $part ($0)\n    Args: $*"
        fi
        echo "Done"
        debugPause
        . ${postdownpath}fog.drivers
        . ${postdownpath}fog.ad
        umount /ntfs
        ;;
    *)
        echo "Non-Windows Deployment"
        debugPause
        return
        ;;
esac

0_1478194755557_fog.postdownload

[Tom Elliott]

@george1421 The -eq 0 directly after the done part of the loop will be enacting on the last command ran.

In this case it would either be echo or break which both will always equal 0.

The if I’m referring to is not needed because you’re looping directories and immediately after the main mount you’re testing already.

To correct this, and leave this there, you can add a variable in the first check of the mount success by doing something like:

ntfsstatus="$?"
if [[_! $ntfsstatus -eq 0_]]; then
    echo "Skipped"
    continue
fi

Then change the if check after the loop to check for $ntfsstatus instead of $?.

A lot of refinement can be added admittedly.

[THEMCV]

@george1421 @Tom-Elliott @Quazz Okay, it looks like it worked! Amazing!

You guys are simply the best devs/mods/team ever.

Although I forgot to disable FOG Client in my sysprepped image, I fixed and and will be double testing again. It went through the section without a hitch though.

[Tom Elliott]

@THEMCV safe to solve the?

[george1421]

@THEMCV That’s great. I’m going to compile the results of this thread into a tutorial page tonight to get everything in one spot again.

[THEMCV]

@Tom-Elliott Yep, it’s working extremely well. Thank you for helping me (and writing a piece of code for me!).

@george1421 Sounds great, that’d be amazing! All of the past places that I’ve worked at (I’m in contact with them after I left) will appreciate the write up. They’ve been wanting to get master images rolling at their school districts (one being ~1,000 PCs), but never have gotten to get them up and running.

[george1421]

@THEMCV I did create a write up for creating a single golden image for multiple platforms here: https://forums.fogproject.org/topic/7391/deploying-a-single-golden-image-to-different-hardware-with-fog But because of my NDA with my company I can’t include any of my own scripts. Now with what Tom, Lee an other produced I can compile that into a single document.

But this next one will be short and to the point copy and paste this and it “should” work as designed. I’ll leave the big words on the other documents.

[THEMCV]

@george1421 Ah yes, I did read over that one a bit! I finally got it figured out, but I didn’t end up using MDT. Very thorough.

[Lee Rowlett]

apologies both - i could of jumped in sooner to point out about the /fog directory confusion and assisted with the partition code but been swamped as of late but luckily @Tom-Elliott had already sorted partition bit of magic for you guys!

@THEMCV if you do only have dell machines and want to use cab files - you can use cabextract which is built into the FOS.

something like:

cabextract -d /ntfs/Windows/DRV "/fog/Drivers/$osn/${machine}"/*.CAB &>/dev/null;

/ntfs/Windows/Drv - Change to wherever you want your drivers to be extracted to

/fog/Drivers/etc… - Change to match the directory you store the .cab file on the server. i.e. /images/Drivers/E7270-WIN7-A02-8924F.CAB

if you go down the .cab route - use the enterprise cabs as they are tested and put together specifically for image deployment.
http://en.community.dell.com/techcenter/enterprise-client/w/wiki/2065.dell-command-deploy-driver-packs-for-enterprise-client-os-deployment

if for whatever reason the cab isn’t sufficient and you need to add drivers, you could incorporate both .cab and folders using both sets of code. if you know what i mean?

as @george1421 pointed out scripts are a lil’ flawed but where written and posted sometime ago and for my own environment at the time and my own postscripts have come a long way since then.

the wiki post would be a very good idea as easier to keep up to date, once that’s done it may be worth changing any old posts with code in, redirecting users to the wiki so they don’t put conflicting or outdated code together. but like @george1421 said, a lot of it is personal preference and there is so many ways of achieving the same thing…

Glad you got there in the end though

[Jacky94]

This post is deleted!

[Jacky94]

Hello,
Is it possible to have the script complete and that works?

It would be nice to have this feature directly integrated into fog in a future version.

The management of the drivers customized by machine model is paramount now in the windows images.

Thanks Jacky

[george1421]

@Jacky94 Its a start: https://forums.fogproject.org/topic/8889/fog-post-install-script-for-win-driver-injection/5

But coming up with a universal driver install would be difficult since each company is unique.

[Jacky94]

Hello,
Is it possible to have the script complete and that works?

It would be nice to have this feature directly integrated into fog in a future version.

The management of the drivers customized by machine model is paramount now in the windows images.

Thanks Jacky

[Tom Elliott]

@Jacky94 As @george1421 stated, this is not something that can be done considering the sheer number of companies and products available. And, each person’s layout is 100% unique to their configuration.

[Jacky94]

@Tom-Elliott

Do not worry I know how to fetch my Dell drivers.

But I would like to be able to inject the drivers from the Fog web interface.

[Tom Elliott]

@Jacky94 A feature request that, this late in the game, will not be processed.