WOL

[Tom Elliott]

We (being @Wayne-Workman and me) found the issue, hopefully, and think we have fixed it.

Please give it a shot.

You can try installing the working-RC-14 branch. ( @mp12 and @adukes40 only please).

[Tom Elliott]

I ask this because the sooner I know the sooner I’ll release RC-14.

[mp12]

@Tom-Elliott

switched to RC-14.

We tested the URL (also changed order) and the group wake-up directly in FOG. Each test was realized with three clients.
All clients woke-up! Great work @Tom-Elliott and @Wayne-Workman.

Thanks a lot!

[adukes40]

@Tom-Elliott On RC-14. still no wol for me. I’m not sure what else I can check.

[Tom Elliott]

@adukes40 If you have multiple nodes, you may need to try testing using those other nodes as a starting point.

[adukes40]

@Tom-Elliott

http://10.103.72.49/fog/management/index.php?sub=wakeEmUp&mac=b8:ac:6f:3d:6e:a4 = master node, nothing

http://10.106.2.149/fog/management/index.php?sub=wakeEmUp&mac=b8:ac:6f:3d:6e:a4 = node where machine is located, nothing. States this is a node and not to use the web interface.

can run wol utility from 10.106.2.149 to the mac, and it wakes up.

[Tom Elliott]

@adukes40 And all nodes are on the same version?

[adukes40]

@Tom-Elliott just changed them all to rc-14

[Wayne Workman]

@Tom-Elliott There must be some sort of problem with storage node WOL, it’s the only thing left. I have a storage node here at home that I can test with - will get back here in a few.

[Tom Elliott]

@Wayne-Workman It’s already fixed in latest.

[Wayne Workman]

@adukes40 Hear that? please re-pull and update all nodes again.

[Tom Elliott]

@Wayne-Workman He already did, it’s how I know it was already pushed and is working.