WOL

[Tom Elliott]

@mp12 said in WOL:

@Tom-Elliott

• A single host wake-up in FOG GUI works fine.

• WOL via URL

http://x.x.x.x/fog/management/index.php?sub=wakeEmUp&mac=aa:bb:cc:dd:ee:ff

works.

• A Group wake-up via FOG GUI won’t work. I don’t get any error in the /var/log/apache/error.log.

If you try the URL as:

http://x.x.x.x/fog/management/index.php?sub=wakeEmUp&mac=aa:bb:cc:dd:ee:ff|ab:bc:cd:de:ef
Does it give the same issue? NOTE: The | and immediate following MAC Address. The second, third, or xth number of MAC’s don’t necessarily have to be “real” macs.

If that works, try replacing the “order” of the macs. So if aa:bb:cc:dd:ee:ff is your “valid” mac address, and you put it at the end of the “string” does it work? This will help me try to figure out what’s needed to happen.

@mp12, if I recall you’re running the “working-RC-12” branch right?

[mp12]

Seems like the last client inside a group or inside the URL wakes up.

@Tom-Elliott
Running RC-12 Version 46
Tested URL with different MAC Addresses and different number of clients. We also changed the order of addresses.
Everytime we execute the URL, the last MAC in the row wakes up

@Wayne-Workman
We have different size of groups. Now we tested a group with two clients and the second client in the group woke up. First one still off.

[Tom Elliott]

@mp12 not that it will help the issue at hand but mind upping to 13?

[Wayne Workman]

@mp12 invaluable information, thank you. I have to sit down and test WOL with @Tom-Elliott and get this resolved ASAP.

[Tom Elliott]

We (being @Wayne-Workman and me) found the issue, hopefully, and think we have fixed it.

Please give it a shot.

You can try installing the working-RC-14 branch. ( @mp12 and @adukes40 only please).

[Tom Elliott]

I ask this because the sooner I know the sooner I’ll release RC-14.

[mp12]

@Tom-Elliott

switched to RC-14.

We tested the URL (also changed order) and the group wake-up directly in FOG. Each test was realized with three clients.
All clients woke-up! Great work @Tom-Elliott and @Wayne-Workman.

Thanks a lot!

[adukes40]

@Tom-Elliott On RC-14. still no wol for me. I’m not sure what else I can check.

[Tom Elliott]

@adukes40 If you have multiple nodes, you may need to try testing using those other nodes as a starting point.

[adukes40]

@Tom-Elliott

http://10.103.72.49/fog/management/index.php?sub=wakeEmUp&mac=b8:ac:6f:3d:6e:a4 = master node, nothing

http://10.106.2.149/fog/management/index.php?sub=wakeEmUp&mac=b8:ac:6f:3d:6e:a4 = node where machine is located, nothing. States this is a node and not to use the web interface.

can run wol utility from 10.106.2.149 to the mac, and it wakes up.

[Tom Elliott]

@adukes40 And all nodes are on the same version?

[adukes40]

@Tom-Elliott just changed them all to rc-14

[Wayne Workman]

@Tom-Elliott There must be some sort of problem with storage node WOL, it’s the only thing left. I have a storage node here at home that I can test with - will get back here in a few.

[Tom Elliott]

@Wayne-Workman It’s already fixed in latest.

[Wayne Workman]

@adukes40 Hear that? please re-pull and update all nodes again.

[Tom Elliott]

@Wayne-Workman He already did, it’s how I know it was already pushed and is working.