How to pxe boot cent os 7

[dureal99d]

HOw would I make the nfs mountable?

[george1421]

@dureal99d said in How to pxe boot cent os 7:

HOw would I make the nfs mountable?

Understand this is beyond the scope of what the FOG server supports. That doesn’t mean that you can’t do this with FOG, its just not supported by the FOG project.

You might want to explain exactly what you want to do here? Do you want to pxe boot a linux live environment with iPXE or do you wan to pxe boot a linux installer via iPXE? The answer may provide a better direction.

IMO it would be easier to use an already exported NFS filesystem like /images Just create a subdirectory below /images (like /images/centos) then update your iPXE configuration to use that share instead of an http nfs root.

Edit - Typo fixed.

[dureal99d]

@george1421 said in How to pxe boot cent os 7:

that share instead of an http nfs root.

I would like to boot the live system and then from there be able to install the os on a physical drive as I can with Ubuntu, Linux mint and kubuntu.

thought as you have already stated. I would not mind being able to use the already exported nfs. either way works.

the purpose of this is to be able to create the ultimate complex advance boot benu and have all these Linux distros working right out the gate.

this will help me complete this project.

[dureal99d]

@george1421 said in How to pxe boot cent os 7:

@dureal99d said in How to pxe boot cent os 7:

HOw would I make the nfs mountable?

Understand this is beyond the scope of what the FOG server supports. That doesn’t mean that you can’t do this with FOG, its just not supported by the FOG project.

You might want to explain exactly what you want to do here? Do you want to pxe boot a linux live environment with iPXE or do you wan to pxe boot a linux installer via iPXE? The answer may provide a better direction.

IMO it would be easier to use an already exported NFS filesystem like /images Just create a subdirectory below /images (like /images/centos) then update your iPXE configuration to use that share instead of an http nfs root.

Edit - Typo fixed.

I know you said this is not supported by you guys but I have received support at this forum before for this type of issue and this is how I was able to boot Ubuntu based Linux distros and as such I post this pic in hopes you will reconsider.

[Sebastian Roth]

@dureal99d As George already mentioned you need to have your files exported via NFS to make them accessible for the booting kernel. Please post your /etc/exports file here. Configure /var/www/fog/service/ipxe/ubbuntu6_64/ to be exported if it’s not yet.

[dureal99d]

@Sebastian-Roth said in How to pxe boot cent os 7:

@dureal99d As George already mentioned you need to have your files exported via NFS to make them accessible for the booting kernel. Please post your /etc/exports file here. Configure /var/www/fog/service/ipxe/ubbuntu6_64/ to be exported if it’s not yet.

Here is my exports file, I have since tried to boot fedora with the same result and being as it is a cent os derivative, I figured id get the same result as that’s exactly what I got.

here is my exports config.
/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)
/var/www/fog/service/ipxe/16.04.1_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/16.04.1_32 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/15.10_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/15.10_32 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/kubuntu6_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/kubuntu6_32 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/kubuntu5_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/kubuntu5_32 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/lm18_32 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/lm18_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/lm_32 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/lm_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/lmc_32 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/lmc_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/Centos *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/bootcd *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/ubcd *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/var/www/fog/service/ipxe/fedora *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)

this is the code ive used.

kernel http://${fog-ip}/fog/service/ipxe/fedora/images/pxeboot/vmlinuz
initrd http://${fog-ip}/fog/service/ipxe/fedora/images/pxeboot/initrd.img
imgargs vmlinuz root=/dev/nfs boot=nfs netboot=nfs nfsroot=${fog-ip}:/var/www/fog/service/ipxe/fedora/
boot || goto failed
goto start

[george1421]

@dureal99d I guess I’ll start with a simple statement wow, that’s quite an nfs export.

I would (personally) collapse them down to this
/var/www/fog/service/ipxe *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)

Actually if it was me I would move my files out of the fog directory all together to avoid them from being clobbered during an upgrade.

I might put them into some place like /opt/bootimgs and then export that location. You should be able to map a directory below your mount (share) point. So if you share /opt/bootimgs you should be able to mount /opt/bootimgs/Centos I would test this from another linux server by using the following command mount -t nfs <fog_server_ip>:/opt/bootimgs/Centos /mnt just to make sure it mounts over correctly with only sharing the /opt/bootimgs

Your advanced menu code for fedora looks spot on. You have to be sure that the vmlinuz file you use is capable of network booting via nfs. Not all of them are. I personally would start with live media for all platforms you want to pxe boot. The distributions should give you guidance on what you have to configure for kernel parameters to pxe boot the target computer.

[dureal99d]

@george1421 said in How to pxe boot cent os 7:

that’s quite an nfs export

Ill try your suggestion and let you know how it goes

[Wayne Workman]

@george1421 said in How to pxe boot cent os 7:

I guess I’ll start with a simple statement wow, that’s quite an nfs export.

+1, that is an insane exports file. I concur with George. You should simplify… a lot.

[dureal99d]

@george1421 said in How to pxe boot cent os 7:

/var/www/fog/service/ipxe *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)

that one liner is pretty nice

[dureal99d]

@Wayne-Workman @george1421
I am getting no such file or directory exist , how do i fix this?

“bash: 192.168.1.109: No such file or directory”

[Wayne Workman]

@dureal99d I’m not sure how much you know, but it doesn’t hurt you or future readers to just re-iterate what I know.

The /etc/exports file is for Network File System exports. This is how Linux natively shares files across a network.

http file distribution is done via Apache or nginx or some other http service, and is NOT nfs. these paths you have in your original post, they are web paths. Such as: http://${fog-ip}/fog/service/ipxe/Centos/images/pxeboot/initrd.img This is a web path. This would be accessible if you plugged the fully expanded URL into a web browser. This is not via NFS, but via HTTP using apache to serve it.

Please post a picture of the error you’re getting, it’ll help us figure out what’s going on.

[dureal99d]

@Wayne-Workman

[dureal99d]

@Wayne-Workman I see, well clearly i have a lot to learn about nfs. and i am at another station trying to “linux” of course trying to mount the share.

[Wayne Workman]

@dureal99d I’d suggest you move all that stuff to somewhere else besides a web directory. This is a rather very nasty setup IMO - and as it is this is absolutely going to fill some partition somewhere eventually as FOG makes a complete copy of the web directory each time you re-run the installer (to update or to troubleshoot). You need to put this stuff elsewhere.

[Tom Elliott]

Where are you seeing no such? Is it in ipxe or just in cli? It appears, to me, your cli is wrong as you have <> in the cli around the IP. This is incorrect, or so I thought. It should be ip:/path/to/mount

[dureal99d]

@Wayne-Workman said in How to pxe boot cent os 7:

directory. This is a rather very nasty setup IMO - and

Ok I’m in the middle of moving it all to the suggested location as we speak.

[dureal99d]

@Tom-Elliott said in How to pxe boot cent os 7:

Is it in ipxe or just in cli

my cli is clearly wrong then as I just copied and pasted what @george1421 put a command I should use to mount and now that I look at it I probably read it wrong

[Tom Elliott]

@dureal99d it was right. In Linux when describing and line it’s quite common to use <> as a means to say: replace with… Just remove the <> and change the string for your setup

[dureal99d]

@Tom-Elliott ok so i did as suggested and now i get this

mount: wrong fs type, bad option, bad superblock on 192.168.1.109:/opt/bootimgs/fedora,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount.<type> helper program)

   In some cases useful info is found in syslog - try
   dmesg | tail or so.