Multicast won't start

Wayne Workman

@Towndrunk said in Multicast won't start:

10.15.31.20

What does that address belong to?

Towndrunk

@Wayne-Workman that is the IP address of the FOG Server.

Wayne Workman

@Towndrunk Well, that’s where it’s trying to send the multicast data to, and that will never, ever work.

Go here:
Web Interface -> FOG Configuration -> FOG Settings -> Multicast Settings -> FOG_MULTICAST_ADDRESS

And set that to 0 then restart the FOGMulticastManager and try again.

Towndrunk

@Wayne-Workman I believe that is where it was by default, and it wasn’t working. A co-worker made the change and it still wasn’t working, but he never put it back. I’ll put it back now and try again as soon as the update is done.

Towndrunk

I went in to Image Management> Multicast Image and created a multicast with the following settings. I added one to the multicast and it was found and sat at the same screen, then added the second and it did the same. This is the same indication I have got in the past, however the log says that it is running.

Session: multi
Client Count: 2
Timeout (minutes): 4
Select Image: The Image

[08-11-16 8:42:53 am] * No tasks found!
[08-11-16 8:43:03 am] * No tasks found!
[08-11-16 8:43:13 am] | Task (15) multi is new!
[08-11-16 8:43:13 am] | Task (15) multi has been cleaned.
[08-11-16 8:43:13 am] | Task (15) /images/Windows10DefaultLaptop image file found.
[08-11-16 8:43:13 am] | Task (15) 1 client(s) found or to receive.
[08-11-16 8:43:13 am] | Task (15) multi sending on base port: 61194
[08-11-16 8:43:13 am] | CMD: cat /images/Windows10DefaultLaptop/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 240 --portbase 61194 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 10 --portbase 61194 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p3.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 10 --portbase 61194 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p4.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 10 --portbase 61194 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p5.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 1 --max-wait 10 --portbase 61194 --full-duplex --ttl 32 --nokbd --nopointopoint;
[08-11-16 8:43:13 am] | Task (15) multi has started.
[08-11-16 8:43:23 am] | Task (15) multi is already running PID 27115
[08-11-16 8:43:33 am] | Task (15) multi is already running PID 27115
[08-11-16 8:43:43 am] | Task (15) multi is already running PID 27115
[08-11-16 8:43:53 am] | Task (15) multi is already running PID 27115
[08-11-16 8:44:03 am] | Task (15) multi is already running PID 27115
[08-11-16 8:44:13 am] | Task (15) multi is already running PID 27115
[08-11-16 8:44:23 am] | Task (15) multi is already running PID 27115
[08-11-16 8:44:33 am] | Task (15) multi is already running PID 27115
[08-11-16 8:44:43 am] | Task (15) multi is already running PID 27115
[08-11-16 8:44:53 am] | Task (15) multi is already running PID 27115
[08-11-16 8:45:03 am] | Task (15) multi is already running PID 27115
[08-11-16 8:45:13 am] | Task (15) multi is already running PID 27115
[08-11-16 8:45:23 am] | Task (15) multi is already running PID 27115
[08-11-16 8:45:33 am] | Task (15) multi is already running PID 27115
[08-11-16 8:45:43 am] | Task (15) multi is already running PID 27115
[08-11-16 8:45:53 am] | Task (15) multi is already running PID 27115
[08-11-16 8:46:03 am] | Task (15) multi is already running PID 27115
[08-11-16 8:46:13 am] | Task (15) multi is already running PID 27115
[08-11-16 8:46:23 am] | Task (15) multi is already running PID 27115
[08-11-16 8:46:33 am] | Task (15) multi is already running PID 27115
[08-11-16 8:46:43 am] | Task (15) multi is already running PID 27115

Wayne Workman

@Towndrunk The multicast address is now completely missing from the command, did you set it to 0 or blank?

Tom Elliott

@Wayne-Workman Multicast address on the sender will only display IF the multicast address in the global settings is defined.

Towndrunk

@Wayne-Workman I set it to 0

FOG_UDPCAST_INTERFACE: eth0
FOG_UDPCAST_STARTINGPORT: 64148
FOG_MULTICAST_MAX_SESSIONS: 64
FOG_UDPCAST_MAXWAIT : 4
FOG_MULTICAST_ADDRESS: 0
FOG_MULTICAST_PORT_OVERRIDE: 0
FOG_MULTICAST_DUPLEX : FULL_DUPLEX

Pascal Gazaille

@Wayne-Workman Hey sorry for the delay, I did what you wanted and tried to multicast 4 laptops this morning, it seems to work!

I’m gonna tried with more computer later today!

Wayne Workman

@Towndrunk Can you please try the below steps that I posted for the other guy now?

Pascal Gazaille

@Wayne-Workman Once the multicast job is done, is it supposed to disapear from the DB ‘multicastSessions’?

Wayne Workman

@Pascal-Gazaille It’s supposed to be marked as done, at least. There’s been work in this area, I’m going to defer to @Tom-Elliott on that question.

Tom Elliott

We’re at 1.3.0-RC-8, which I know addresses issues on multicast closing. This should be fixed now, so YES it should. NO need to defer, please update and see if all is well.

Towndrunk

@Wayne-Workman I went in and followed the steps listed below. I’m assuming that these are the steps that you were asking me to do?

mysql> DELETE FROM `multicastSessions` WHERE 1;
Query OK, 15 rows affected (0.00 sec)

mysql> DELETE FROM `multicastSessionsAssoc` WHERE 1;
Query OK, 2 rows affected (0.00 sec)

mysql> DELETE FROM `tasks` WHERE `taskTypeID` = 8;
Query OK, 42 rows affected (0.01 sec)

I then restarted the service, and tested again. I got the same results.

[08-11-16 9:21:43 am] * Starting MulticastManager Service
[08-11-16 9:21:43 am] * Checking for new items every 10 seconds
[08-11-16 9:21:43 am] * Starting service loop
[08-11-16 9:21:43 am] * No tasks found!
[08-11-16 9:21:53 am] * No tasks found!
[08-11-16 9:22:03 am] * No tasks found!
[08-11-16 9:22:13 am] * No tasks found!
[08-11-16 9:22:23 am] * No tasks found!
[08-11-16 9:22:33 am] * No tasks found!
[08-11-16 9:22:43 am] * No tasks found!
[08-11-16 9:22:53 am] * No tasks found!
[08-11-16 9:23:03 am] * No tasks found!
[08-11-16 9:23:13 am] * No tasks found!
[08-11-16 9:23:23 am] * No tasks found!
[08-11-16 9:23:33 am] * No tasks found!
[08-11-16 9:23:43 am] | Task (16) test is new!
[08-11-16 9:23:43 am] | Task (16) test has been cleaned.
[08-11-16 9:23:43 am] | Task (16) /images/Windows10DefaultLaptop image file found.
[08-11-16 9:23:43 am] | Task (16) 2 client(s) found or to receive.
[08-11-16 9:23:43 am] | Task (16) test sending on base port: 64148
[08-11-16 9:23:43 am] | CMD: cat /images/Windows10DefaultLaptop/d1p1.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 2 --max-wait 240 --portbase 64148 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p2.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 2 --max-wait 10 --portbase 64148 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p3.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 2 --max-wait 10 --portbase 64148 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p4.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 2 --max-wait 10 --portbase 64148 --full-duplex --ttl 32 --nokbd --nopointopoint;cat /images/Windows10DefaultLaptop/d1p5.img | /usr/local/sbin/udp-sender --interface eth0 --min-receivers 2 --max-wait 10 --portbase 64148 --full-duplex --ttl 32 --nokbd --nopointopoint;
[08-11-16 9:23:43 am] | Task (16) test has started.
[08-11-16 9:23:53 am] | Task (16) test is already running PID 27359
[08-11-16 9:24:03 am] | Task (16) test is already running PID 27359
[08-11-16 9:24:13 am] | Task (16) test is already running PID 27359
[08-11-16 9:24:23 am] | Task (16) test is already running PID 27359
[08-11-16 9:24:33 am] | Task (16) test is already running PID 27359
[08-11-16 9:24:43 am] | Task (16) test is already running PID 27359
[08-11-16 9:24:53 am] | 1 task to be cleaned
[08-11-16 9:24:53 am] | Cleaning 1 task(s) removed from FOG Database.
[08-11-16 9:24:53 am] | Cleaning Task (16) test
[08-11-16 9:24:53 am] | Task (16) test has been completed.
[08-11-16 9:24:53 am] * No tasks found!
[08-11-16 9:25:03 am] * No tasks found!

Wayne Workman

@Towndrunk Can you repeat the steps to clean the DB, then update to RC-8 (installing RC-8 will restart fog multicast manager as part of the upgrade), then try again?

Towndrunk

@Wayne-Workman I can do that. I am already running RC-8 though. I ran the upgrade this morning before doing the steps to clean the DB. If you want me to, I can repeat the process now.

Running Version 1.3.0-RC-8
SVN Revision: 5949

Wayne Workman

@Towndrunk No, don’t bother then.

What OS is fog running on?

Towndrunk

@Wayne-Workman Ubuntu 14.04 LTS

mysql> DELETE FROM `multicastSessions` WHERE 1;
Query OK, 1 row affected (0.00 sec)

mysql> DELETE FROM `multicastSessionsAssoc` WHERE 1;
Query OK, 0 rows affected (0.00 sec)

mysql> DELETE FROM `tasks` WHERE `taskTypeID` = 8;
Query OK, 2 rows affected (0.00 sec)

mysql> quit
Bye
root@FogServer:~# cd /root/fogproject
root@FogServer:~/fogproject# git pull
Already up-to-date.
root@FogServer:~/fogproject#

BedCruncher

@Towndrunk
Try this…

systemctl stop FOGMulticastManager
killall udp-sender
killall udp-sender
killall udp-sender
mysql -u root fog
TRUNCATE TABLE multicastSessionsAssoc;
TRUNCATE TABLE multicastSessions;
TRUNCATE TABLE tasks;
quit;
systemctl start FOGMulticastManager

Towndrunk

@BedCruncher I’ll make an attempt now and see what happens.

root@FogServer:~# sudo service FOGMulticastManager stop
 * Stopping FOG Computer Imaging Solution: FOGMulticastManager                                                                 [ OK ] 
root@FogServer:~# killall udp-sender
root@FogServer:~# killall udp-sender
root@FogServer:~# killall udp-sender
root@FogServer:~# mysql -u root fog
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 107
Server version: 5.5.50-0ubuntu0.14.04.1 (Ubuntu)

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> TRUNCATE TABLE multicastSessionsAssoc;
Query OK, 0 rows affected (0.00 sec)

mysql> TRUNCATE TABLE multicastSessions;
Query OK, 0 rows affected (0.00 sec)

mysql> TRUNCATE TABLE tasks;
Query OK, 0 rows affected (0.00 sec)

mysql> quit;
Bye
root@FogServer:~# sudo service FOGMulticastManager start
 * Starting FOG Computer Imaging Solution: FOGMulticastManager                                                                 [ OK ]

Multicast won't start

244

12.0k

17.3k

155.2k