Deploy image. No disk passed (runPartprobe)

[Miguel Palacios]

Hi guys,
Around here again; I am having problems deployed an image on a HP Z240 WorkStation.
Then started the proccess, I get this error:

My FOG server is installed in a CentOS 6.5, the base version is 1.2.0 and SVN version is 7176 (also have tried with the 7009).

I have read in other post (3 month ago) that this problem it resolved in a update… But I haven’t lucky

Any idea?

Thank you guys!

[Sebastian Roth]

@Miguel-Palacios Please boot this client into debug deploy (normal deploy but before you click create tick the checkbox for debug). Then run gdisk -l /dev/sda and post a picture of the full output here.

[Miguel Palacios]

Hi @Sebastian-Roth, here I leave the picture…

Thank you!

[Sebastian Roth]

@Miguel-Palacios The output looks pretty good to me. Is this really from the client that just failed to deploy?? Looking at the script code I am a bit lost how it can finish the “Restoring Partition Tables (GPT)” just fine (says “Done” at the end) but would fail with “No disk passed” on the next call of “runPartprobe”… doesn’t make any sense I find. Please don’t get me wrong. I am not saying that you are doing anything wrong - I just mean that I cannot get my head around it.

Would you mind actually running through a debug deploy? Schedule it and when you get to the shell just run fog and step through it. See if that makes a difference?!?

[Miguel Palacios]

Hi @Sebastian-Roth, excuse me for delay in the response… too much work for here…
I have tried a with schedule debug task and run fog but the result is the same…

Thank you!

[Sebastian Roth]

@Miguel-Palacios Can you please upload d1.mbr (found in /images/<img-name>) to the forum?

[Tom Elliott]

@Sebastian-Roth I think I found it.

When we fixed the inventory update issue, we were on a ball. But Apparently just after the script we reset the hd/disk/part variables and never recall the getHardDisk function when it preps to move onward. I’m double testing to be sure but still that is odd it’s only now cropping up.

[Miguel Palacios]

@Sebastian-Roth attached it

0_1461750277967_d1.mbr

Thank you!

[Tom Elliott]

@Miguel-Palacios Can you update and test first?

[Miguel Palacios]

@Tom-Elliott after update to the last version I can’t access to the GUI… Is this possible?

[Sebastian Roth]

@Miguel-Palacios Please check your apache error logs. See my signature below this message on where to find those log files.

[Sebastian Roth]

@Miguel-Palacios Confirmed the issue and Tom fixed it in the last minutes. Please update to the very latest version and you should be up again.

[Miguel Palacios]

@Tom-Elliott, @Sebastian-Roth all working!
The image already is deploying!

Thank you guys!
Solved!