PHP error Uncaught Exception: DateTimeZone

kortnor

@Tom-Elliott
I’ve noticed ( at least on a fresh installation ) that when I install centos 7 minimal on a vm (virtual box ) that when I restart the vm and I restart the mysqld daemon that he indicates me the mysqld.pid can’t be created because there is not mysqld folder in /var/run

now i’ve tried to clean the actual centos 7 from mysql meaning by that a yum remove mysql mysql-* and also delete the /var/lib/mysql
Then Ive installed mariadb ( mariadb-server mariadb-libs mariadb) with yum and configured with :

after I try a reinstallation of the trunk ( before I make a git pull in order to be sure I’m on the last version ) then I receive the following error

I would like to know also, if the script detect the specific version of centos family or does he embed it in redhat ( Base linux: Red Hat )

 * Here are the settings FOG will use:
 * Base Linux: Redhat
 * Detected Linux Distribution: CentOS Linux
 * Server IP Address: 10.10.0.15
 * Server Subnet Mask: 255.255.255.0
 * Interface: eth0
 * Installation Type: Normal Server
 * Donate: 0
 * Internationalization: 0
 * Image Storage Location: /images
 * Using FOG DHCP: Yes
 * DHCP router Address: 10.10.0.100
 * DHCP DNS Address: 10.10.0.254


 * Are you sure you wish to continue (Y/N) Y

 * Installation Started

 * Installing required packages, if this fails
 | make sure you have an active internet connection.

 * Adding needed repository....................................OK
 * Preparing Package Manager...................................OK
 * Packages to be installed:

	httpd php php-cli php-common php-gd mysql mysql-server dhcp tftp-server nfs-utils vsftpd net-tools wget xinetd tar gzip make m4 gcc gcc-c++ lftp php-mysqlnd curl php-mcrypt php-mbstring mod_ssl php-fpm php-process


 * Skipping package: httpd.....................................(Already Installed)
 * Skipping package: php.......................................(Already Installed)
 * Skipping package: php-cli...................................(Already Installed)
 * Skipping package: php-common................................(Already Installed)
 * Skipping package: php-gd....................................(Already Installed)
 * Installing package: mysql...................................Failed!

log within the error_xxx.log which indicates the script still try to install mysql in place of using the mariadb.

ransaction Summary
================================================================================
Install  1 Package (+1 Dependent package)

Total download size: 6.5 M
Installed size: 33 M
Downloading packages:
--------------------------------------------------------------------------------
Total                                              202 kB/s | 6.5 MB  00:33
Running transaction check
Running transaction test


Transaction check error:
  file /etc/my.cnf from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/lib64/mysql/libmysqlclient.so.18.0.0 from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/czech/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/danish/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/dutch/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/english/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/estonian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/french/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/german/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/greek/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/hungarian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/italian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/japanese/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/korean/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/norwegian-ny/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/norwegian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/polish/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/portuguese/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/romanian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/russian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/serbian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/slovak/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/spanish/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/swedish/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64
  file /usr/share/mysql/ukrainian/errmsg.sys from install of mysql-libs-5.5.48-1.el6.remi.x86_64 conflicts with file from package mariadb-libs-1:5.5.44-2.el7.centos.x86_64

Sebastian Roth

@kortnor Please check your /opt/fog/.fogsettings file. I guess it says:

...
packages='... mysql mysql-server...'
...

Forcing the installer to try and install mysql. Just remove the .fogsettings file if you are doing a clean new install anyway - maybe backup if in case you need it later on.

Tom Elliott

@Sebastian-Roth To add an, if you still want to update, but want dynamic packages, just remove the packages line altogether from the .fogsettings file (while maintaining the file itself.)

kortnor

@Sebastian-Roth
I tried that also
Cleaning setup

delete /etc/httpd/conf.d/fog
rm -rf /var/www/html/fog
rm -rf /opt/fog/
fully delete mysql (lke explained before)

restart install

cd /opt/fogGit/
git pull
cd bin
./installfog.sh

I don’ think I’m missing something.

Sebastian Roth

@kortnor On my system I was not able to fully remove the mariadb/mysql packages because mariadb/mysql-libs is needed by some very important system packages. So I am wondering if you somehow managed to install mysql-libs and are not able to get rid of it anymore? rpm -qa | grep -e mysql -e mariadb (just a wild guess)

kortnor

@Tom-Elliott
also, After deleting the whole opt/fog directory I suppose the install script reacts like it will be a new installation ==> so creating the folder again.

Now what I’ve done is:

yum remove mariadb*
check 2 time if there is no mysql pkg wih ==> yum list installed | grep mysql

make a new installation again.

Now I arrived to the fog webui

for your info the script has installed the following mysql package
mysql.x86_64 5.5.48-1.el6.remi @remi
mysql-libs.x86_64 5.5.48-1.el6.remi @remi
mysql-server.x86_64 5.5.48-1.el6.remi @remi

now, because mysql is replaced by mariadb , will there be any changed applied to the script when its run to centos 7 or rhel 7 ?

Best,

Sebastian Roth

@kortnor Try running the following commands on your system. Here is what they show on my system (as well CentOS 7 fresh install but installs mariadb):

$ dnf list --enablerepo=remi mysql
Using metadata from Tue Mar 15 19:11:26 2016
Available Packages
mariadb.x86_64                                   1:5.5.44-2.el7.centos                                   base
$ yum --enablerepo=remi list mysql
...
Error: No matching Packages to list
$ yum --enablerepo=remi list mariadb
...
Available Packages
mariadb.x86_64                                    1:5.5.44-2.el7.centos                                    base

I am wondering why you have mysql el6 packages installed…?!?

kortnor

@Sebastian-Roth
hereunder the result of the requested command line

[root@fog ~]# yum --enablerepo=remi list mysql
Loaded plugins: fastestmirror, replace
Loading mirror speeds from cached hostfile
 * base: ftp.belnet.be
 * epel: ftp.nluug.nl
 * extras: miroir.univ-paris13.fr
 * remi: mirror5.layerjet.com
 * remi-php70: mirror5.layerjet.com
 * remi-safe: mirror5.layerjet.com
 * rpmforge: ftp.nluug.nl
 * updates: miroir.univ-paris13.fr
Installed Packages
mysql.x86_64                                   5.5.48-1.el6.remi                                    @remi
[root@fog ~]# yum --enablerepo=remi list mariadb
Loaded plugins: fastestmirror, replace
Loading mirror speeds from cached hostfile
 * base: ftp.belnet.be
 * epel: ftp.nluug.nl
 * extras: miroir.univ-paris13.fr
 * remi: mirror5.layerjet.com
 * remi-php70: mirror5.layerjet.com
 * remi-safe: mirror5.layerjet.com
 * rpmforge: ftp.nluug.nl
 * updates: miroir.univ-paris13.fr
Available Packages
mariadb.x86_64                                 1:5.5.44-2.el7.centos                                 base

kortnor

@Sebastian-Roth
i’m using the following package

[root@fog ~]# rpm -qa | grep -e mysql -e mariadb
mysql-5.5.48-1.el6.remi.x86_64
mysql-libs-5.5.48-1.el6.remi.x86_64
php-mysqlnd-7.0.4-1.el7.remi.x86_64
mysql-server-5.5.48-1.el6.remi.x86_64

But i can’t use mariadb also and that’s a major threat for me:
everytime I restart my server host, I need to create the /var/run/mysqld /; touch /var/run/mysqld.pid ; chown -R mysql:mysql /var/run/mysqld
otherwise mysql won’t start

Sebastian Roth

@kortnor Ahhhh… the “old” mysql package is still newer than the mariadb package (5.5.48 vs 5.5.44). Therefore yum prefers to install the EL6 mysql version instead of using EL7 mariadb.

yum remove remi-release-6
rpm -Uvh  http://rpms.remirepo.net/enterprise/remi-release-7.rpm
yum -y update
yum --enablerepo=remi list mysql

kortnor

@Sebastian-Roth
that’s really interresting, I’ll create a fresh new vm ( aside the my running one, ) and try what’s you’re proposing, I should do that for thursday evening

In the meantime, I need to learn how to fine tune the images because at the end I would like to apply it on a cluser created with 6 intel nuc.
On each nuc, I’ll push my images but after every nuc needs to be configurer with a static ip ( for sure different for everyone )

Tom Elliott

@kortnor The datetimezone issue should be fixed in the latest update. I wasn’t implicitly defining a Timezone, so it would not find any data in the case of a fresh install.

I found two places that I could use to ensure the timezone is set (albeit not necessarily accurate) in the case the DB hasn’t been loaded yet (fresh install), the php.ini file does not have a date.timezone specified (php defaults to commenting the timezone out). The fix, for now, is test the presence of the variable by means of checking if it’s empty or not.

Mind you if the php.ini file IS set with the date timezone setting, it will NOT try to use the one defined in the DB anyway. However, if you aren’t comfortable messing in /etc/php.ini, the current push of FOG should take over and operate as originally expected (no more 500 heres or erroneous error messages.)

Sebastian Roth

@kortnor I am marking this solved as the initial OP is now properly handled, thanks Tom!!

Probably best if you start a new topic if you run into another problem. I am sure we’ll be able to help you fix it as well!

PHP error Uncaught Exception: DateTimeZone

207

12.0k

17.3k

155.2k