SOLVED Imaging - Single-disk -Resizeable - Latest SVN - doesn't extend partition

[GFm]

@Wayne-Workman

On the latest imaging for two different models/images, it only gives the partition the image size in windows.

I did notice under disk management that it showed the normal size (495 GB), but under my computer, it only shows the disk size (24 GB) for the drive.

To temporarily resolve I went into a cmd prompt and did a diskpart, selected volume, and extend filesystem. That fixed it.

Can this be fixed in fog?

Thanks!

[GFm]

@Tom-Elliott
Everything appears to be fixed now! Thanks for your help!

FYI, my one image needed to be changed to Single-Disk (resizable) and I was updated to the latest SVN

Thanks for all your help!

[GFm]

@Tom-Elliott

No luck on that same machine (DH61 with HHD), but my t440 (HDD) and my dell e5550 (SSD) worked fine. See pics below for my setup. Thanks!

[Tom Elliott]

All updated/uploaded.

[Tom Elliott]

@GFm At least I have to kind of helping me pinpoint issues now lol.

[GFm]

no worries… thanks!

[Tom Elliott]

@GFm forgive my being an idiot lately.

I found the issue and am pushing the script fix right now.

It will be about 5 minutes before I can upload new inits.

[GFm]

@Tom-Elliott

No luck… now I get this…

[GFm]

I’ll do that first thing in the morning and let you know. Thanks!

[Tom Elliott]

@GFm Can you re-re-reupgrade/update?

[GFm]

FOG 6048 in the web, rev4691

[Tom Elliott]

@GFm What version are you on?

[GFm]

@Tom-Elliott
So, the one image that is single partition, resizable works (extends just fine), but this image below does not work. It won’t extend. Thanks for your help so far!

LAM-DH61DL-MMS158-AD - 71
default: Windows 7
Multiple Partition Image - Single Disk (Not Resizable)
Everything

[Tom Elliott]

@GFm Please update again.

I found the problem by completely replicating your environment (sys.img.000 style images and all) and found the problem.

This has since been fixed. Thank you for reporting the issues and I hope this means your downloads will be MUCH happier.

[GFm]

@Tom-Elliott

Different error now… see error attached. I did get the same result of two different machines/images.

[Tom Elliott]

@GFm I think I was tired when I wrote that. Can you please update and try?

[GFm]

@Tom-Elliott
Sounds good. Let me know when you want me to update and try again. Thanks for checking this out!

[Tom Elliott]

@GFm I’m hoping, once again, that I’m not always an idiot and have found some things in the code base.

I don’t know if it will work as I wasn’t experiencing the same problem described. I did find a bunch of potential problems though, and of them it appears that the “expandPartition” was not receiving the proper listing of partitions.

Specifically, I think it was attempting to expand the parts as: “/dev/sda1 /dev/sda2” as opposed to trying to expand them individually. This may still be the case, but I really don’t know.

[Wayne Workman]

@GFm It’s definitely a bug. Sit tight, it’ll be fixed shortly.

[GFm]

@Wayne-Workman

I’m not exactly sure… I know on Friday last week I was at…
Version: 5972 in fog… rev 4653

Then i updated on Tuesday and it fixed my host registering problem, but apparently the imaging wasn’t correct and I didnt know because I didnt login to the computer after imaging to find out until today.