Difficulty Registering and Imaging DELL Venue 11 Pro (7130)
-
Thank you for the responses!
I will attempt to upgrade to trunk and see if it resolves my issue.
-
Could you possibly link the 64-bit bzImage trunk kernel?
Now I’m having difficulty upgrading to trunk on my current 1.2.0 install…
Upon running ./installfog.sh the script fails at
* Installing package: php5-mysqlnd…Failed! -
What operating system are you using for the fog server? I have a guide I wrote for installation of trunk on Centos 7 for my personal use. I could publish it for you.
-
I’m running FOG on Ubuntu 10.0.4 LTS
-
in that case, i’m not sure how to help you best. perhaps someone else could. the file is in the trunk builds.
-
@jackdub said:
I’m running FOG on Ubuntu 10.0.4 LTS
Execute the installer using sudo.
sudo -i ./installfog.sh -
I’m logged in as root, so sudo might be unnecessary.
In any case, I am going to wget the latest trunk from http://mastacontrola.com/fog_trunk.tar.bz2
Then clean install the trunk build on a test fog server.
I’d like to continue to use Ubuntu… which version of Ubuntu is preferred when using trunk? -
-
Just wanted to follow up on this :
I was able to install FOG trunk (5964) on Ubuntu 14.04 LTS on a test server and successfully registered, uploaded, and deployed a client device with Windows 10 image using UEFI PXE boot (with Secure Boot OFF).
Thanks for all your recommendations!
Can’t wait for the stable 1.3.0 release
-
@jackdub Any specific settings?
-
@Wayne-Workman said:
@jackdub Any specific settings?
Nothing in particular, installed the latest trunk and used the default kernel. It images without any major issues.
However at the end of the image process, I am noticing some sort of uuid error. (I’m not sure if this is because I’m using one single USB-to-Ethernet dongle or if it’s something else that’s causing the error.
-
@jackdub said:
@Wayne-Workman said:
@jackdub Any specific settings?
Nothing in particular, installed the latest trunk and used the default kernel. It images without any major issues.
However at the end of the image process, I am noticing some sort of uuid error. (I’m not sure if this is because I’m using one single USB-to-Ethernet dongle or if it’s something else that’s causing the error.
The senior dev thinks that error is fixed.
When I ask about specific settings, did you put anything into the drive field for the tablet? What boot file are you using for it? -
@Wayne-Workman said:
When I ask about specific settings, did you put anything into the drive field for the tablet? What boot file are you using for it?
Nothing in the drive field was needed (fog recognized the SSD as /dev/sda ) and I used the stock truck ipxe.efi boot file.
