PXE not being detected
-
Sorry to hear that your fog server went sideways on you.
Im a bit of a Luddite, but I’ve had great success with Centos 6.7. I’ve installed FOG and Centos 7 without issue either. Fedora works as well as Ubuntu. I find there is the least about of messing around with Centos. But mainstream linux platforms are supported.
If you have a mobile phone, you can grab the error message on the client if you are quick.
-
@BlueTech I’d recommend CentOS 7 or Fedora 23 Server.
-
Hi
Well um I went with ubuntu 14.04
Found a nice youtube video
https://www.youtube.com/watch?v=TG9qRLQyDU8
That went through the setup of it…
Good news.
The PXE option now works. But you have to be quick in order to select it, so maybe that was the issue last time???
Anyway
New problem…
Created the image.
Set to single disk, resizable partititons.
And told it to create an image.How ever came back that it could not find any resizable partitions…
Now going to try it to do the all disk options…
Not to big a problem I guess…but would have been nice to be able to re size…
BTW
think you could resize the partitions on clonezilla…
-
hi
well think i found the elephant in the fog…
went debug and ran the fixparts command
came up with a gpt error on the disk and said that I should remove this.
so did and now it doing the clone.
throughput currently running at aprox 1000mb/min…which aint that good…but that might be due to where it is plugged in etc…
using the multi part single disk, though don’t think that would cause a slow down.
cheers
blue
-
@BlueTech What is compression set to? And you should be able to set to resize. The issue before was it couldn’t find any of the partitions.
-
hi
well first before fog as a stop gap used clonezilla.
ok so that was booting off the computer that I was going to clone, but well it went to the same server as a target…
throughput was about 4gb/min compared with just under 1gb/min.
will need to check…though - might do a test to see if and where there is a bottleneck…
also well the location has changed…so well the network could be affecting.
Implemented FOG about 5 years odd ago, so glad to get it back up and running. Clonezilla ok for a single one time solution, but fog so much better than the clonezilla server…
-
compression tech?
just used the defaults…where do i find that?
on the image? -
@BlueTech FYI I’m planning on producing several dozen videos for FOG as soon as 1.3.0 is released. Probably closer to 100 than 50.
-
No worries
Hope I didn’t cause any offence…
It was more of a case sharing that video that I had used…
One other thing that when you do that the documentation could with an overhaul. Seems to be all over the place.
Also what with the changes to Fedora in regards to the package deploy and mariadb replacing mysql…
-
just a note, Ubuntu is not a great choice for a VM in hyper-v. Integration services are not up to scratch (legacy NIC, SMP, and clustering issues). Legacy NIC is limited to 100Mbs I believe and since you are only getting 1000Mb/Min this would seem to be the case (about 133Mbs so 100Mb+compression throughput). I have screenshots of 9gb/Min constant using centos 6.7 guest in a clustered VM on 2k12R2 host - this does not use a legacy NIC and has full integration services.
-
@BlueTech said:
Also what with the changes to Fedora in regards to the package deploy and mariadb replacing mysql…
The installer takes care of that.
Fedora 21 used MySQL, while newer Fedora uses MariaDB, and MariaDB is what’s installed by the installer if it doesn’t detect anything present already.
One other thing that when you do that the documentation could with an overhaul. Seems to be all over the place.
What does that mean? Do you want to see a migration video?
