latest SVN keep getting 404 error on management

[Wayne Workman]

@BigMan99211 Then uninstall it, and then try again.

[Tom Elliott]

@BigMan99211 can you try running the installer with:

If you access fog with http://IPOFFOGHERE/fog
./installfog.sh -y -W /var/www/html/ -D fog/

If you access fog with http://IPOFFOGHERE/
./installfog.sh -y -W /var/www/html/fog -D /

[BigMan99211]

OK…
I uninstalled php5, re-installed, re-ran fog install. Still getting the same blank page in Chrome, but in IE, i’m getting a 500 Server Error. And now, the apache log is showing a different error…

[BigMan99211]

This seems to be a php issue… Is there anything that’s changed on the FOG side, that would affect this? The previous version of FOG i was on (svn build 3728, I believe) was working just fine. There haven’t been any updates ran through Ubuntu.

[Tom Elliott]

@BigMan99211 It sounds like you removed php5-mysqlnd. Maybe try reinstalling it?

sudo apt-get install --reinstall php5-mysqlnd; sudo php5enmod mysqlnd

[BigMan99211]

@Tom-elliott : I did as you asked, and now i’m back to the same FOGCore error, that I was having in my original screen shot below.

[Tom Elliott]

Try running these commands (on Ubuntu)

sudo mv /var/www/fog /var/www/fog_back
sudo ln -s /var/www/html/fog /var/www/fog

[BigMan99211]

I made the changes, but the schema update page is still solid white.
I checked the apache logs, and now, all i get is:

administrator@FOG:~$ sudo tail /var/log/apache2/error.log
[sudo] password for administrator: 
[Thu Jul 30 16:32:57.197238 2015] [core:error] [pid 24249] [client 10.20.23.135:60588] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:57.197260 2015] [core:error] [pid 24249] [client 10.20.23.135:60588] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:57.985251 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:57.985315 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:57.997296 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:57.997316 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:57.998069 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:57.998085 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:58.006411 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
[Thu Jul 30 16:32:58.006424 2015] [core:error] [pid 24250] [client 10.20.22.136:58385] AH00082: an unknown filter was not added: PHP
administrator@FOG:~$ 

[sudburr]

@Tom-Elliott said:

@BigMan99211 It sounds like you removed php5-mysqlnd. Maybe try reinstalling it?

sudo apt-get install --reinstall php5-mysqlnd; sudo php5enmod mysqlnd

I’m curious if we’re chasing the same rabbit.

At the prompt to visit the management page I connected with another session and commented out line 179 of:

/var/www/html/fog/commons/init.php.

… then visited the web interface and continued the install. Mind you I’m still chasing installers failing on MySQL configuration.

[JBailey]

This issue seems to happen on my Debian 7 box as well.

Trying to update from SVN 3652 to SVN 3843

I’ve attempted both solutions without any luck. Blank white screen when trying to update the DB and finish install.

[Tom Elliott]

Whenever there’s a blank white screen, it usually means an error. Anything pertinent in the apache error logs?

[Junkhacker]

to get past 3652 i had to do the following (on Ubuntu 12.04)
manually run:

sudo add-apt-repository -y ppa:ondrej/php5-5.6
sudo apt-get update
sudo apt-get install php5

allow all config files to be replaced with defaults when prompted

[Wayne Workman]

@Junkhacker said:

to get past 3652 i had to do the following (on Ubuntu 12.04)
manually run:

sudo add-apt-repository -y ppa:ondrej/php5-5.6
sudo apt-get update
sudo apt-get install php5
allow all config files to be replaced with defaults when prompted

Will a fresh install of the latest FOG Trunk work on Ubuntu 12.04, or are these commands necessary to make it work? I only ask because another person using FOG Trunk with 12.04 in another thread was having issues - not sure if it’s related or not.

[Junkhacker]

not sure. haven’t done a clean install in a while. for what it’s worth, Tom thinks that he’s got the issue figured out in the latest versions of trunk

[JBailey]

Hmmm. I still seem to be suffering from the issue. Just tried 3854.

[Wayne Workman]

@JBailey said:

Hmmm. I still seem to be suffering from the issue. Just tried 3854.

Current is 4339.

[JBailey]

@Wayne-Workman I’m sorry, I should have said trunk 3854.

[Tom Elliott]

Again,

Whenever there’s a blank page, it usually means an error is being thrown.

My guess the error is related to an isValid() function all?

[Wayne Workman]

@JBailey said:

@Wayne-Workman I’m sorry, I should have said trunk 3854.

Is there a reason why you are so far behind?

[JBailey]

@Wayne-Workman I’m currently on trunk 3562. I understand that current git is 4345 but current svn is 3857. Are you recommending using git over svn? I didn’t think there was a difference.

@Tom-Elliott I will take another look into the apache log files.