Help!!! Usb boot Fog

[Eze84d]

Well guys, I was a little lost with this issue … and I wanted to revive …

I need you through a USB flash drive, if possible I ask for a ip and server redirect me where I have my fog.

I hope your answers !!!

Thanks !!!

[Wayne Workman]

Ok. Let’s start over.

You’re using FOG 1.2.0.

What distribution and version of Linux?

[Eze84d]

@Wayne-Workman

Correct, fog 1.2.0 and 7.8.0 debian.

[Wayne Workman]

And you said you’d try dnsmasq if it was simple ?

[Eze84d]

@Wayne-Workman

I have no idea how it works dnmasq … if not bring me problems with what is already armed … there would be problems.

My dhcp, currently assigned ips, and also has a boot loader for dumb terminals for remote desktop working … and it is not feasible to modify this …

Therefore, I need “something” bootee via USB, take my dhcp ip, and be redirected to the server will boot directly fog … if by network normally reach a remote Windows desktop …

I hope is clear, as I am using Google translator, not handle the English.

Apologies and thank you very much for your help !!!

[Wayne Workman]

Ok.

I’ll work on a USB boot drive tonight, and if/when I get it going, I’ll provide an ISO copy.

I want one for myself anyways.

[Eze84d]

@Wayne-Workman

Thank you very much for your help !!!

If it is easier to teach and explain a dnsmask … and not generate problems will miss him … welcome received !!!

The only bear with me … I’m a beginner with all this !!!

[Wayne Workman]

This post is deleted!

[Wayne Workman]

This post is deleted!

[Wayne Workman]

Making serious progress with this…

Fighting with syslinux.cfg, trying to get it’s code right.

[Wayne Workman]

syslinux.cfg

That’s what I have so far… it’s not working.

[Wayne Workman]

ditched syslinux.

etherboot seems very promising and I had more luck with it, and it’s simpler to use.

[cml]

ipxe.iso

I got it working with this iso.

ipxescript:

#!ipxe
echo -n Please enter tftp server: && read next-server && goto netboot
:netstart
dhcp && goto netboot || goto netstart
:netboot
ping -c 1 ${next-server} || goto netstart
chain tftp://${next-server}/default.ipxe || shell

[Wayne Workman]

@cml Can you elaborate?

[cml]

Sure.

I followed the instructions in the Building undionly.kpxe wiki entry.

Except for the ipxescript I used the previous script and the command to build was:

make bin/ipxe.iso EMBED=ipxescript

I wrote the iso using dd: “dd if=ipxe.iso of=/dev/sdb bs=4M” replace sdb with your drive

[Eze84d]

I just saw that went far … now I could explain how official … that is, if you meet the requirements to which I am bound?

I hope ancioso your answers !!! Thank you all for your contributions !!!

[Eze84d]

@cml

Well, I tell them that I took the time to try the ISO CML … and the truth … it’s very nearly what I need … exept for a question … if I need to install 10 pcs at the same time, having this ISO on a flash drive … it could perform smoothly … nor any conflict with my dhcp ??? From what I saw, putting the direction of the mist, it goes directly to the …

I have to get the hat !!! Spectacular !!!

Surely … I will continue to consult for further progress and learning!

Thank you very much !!!