Help!!! Usb boot Fog
-
Disclaimer: I have only tested this on Lenovo laptops.
Go to this wiki entry: [url]http://www.fogproject.org/wiki/index.php/Building_undionly.kpxe[/url]
Follow steps until you get to ‘Build the undionly/ipxe files.’
Build ipxe.usb with this command: [CODE]make bin/ipxe.usb EMBED=ipxescript[/CODE]
Find your usb location (/dev/sdc for me): [CODE]ls -l /dev/sd*[/CODE]
Write ipxe.usb to the usb:[CODE]dd if=bin/ipxe.usb of=/dev/sdc[/CODE]
-
Thank you very much, I also am going to try the weekend !!!
-
Well guys, I was a little lost with this issue … and I wanted to revive …
I need you through a USB flash drive, if possible I ask for a ip and server redirect me where I have my fog.
I hope your answers !!!
Thanks !!!
-
Ok. Let’s start over.
You’re using FOG 1.2.0.
What distribution and version of Linux?
-
Correct, fog 1.2.0 and 7.8.0 debian.
-
And you said you’d try dnsmasq if it was simple ?
-
I have no idea how it works dnmasq … if not bring me problems with what is already armed … there would be problems.
My dhcp, currently assigned ips, and also has a boot loader for dumb terminals for remote desktop working … and it is not feasible to modify this …
Therefore, I need “something” bootee via USB, take my dhcp ip, and be redirected to the server will boot directly fog … if by network normally reach a remote Windows desktop …
I hope is clear, as I am using Google translator, not handle the English.
Apologies and thank you very much for your help !!!
-
Ok.
I’ll work on a USB boot drive tonight, and if/when I get it going, I’ll provide an ISO copy.
I want one for myself anyways.
-
Thank you very much for your help !!!
If it is easier to teach and explain a dnsmask … and not generate problems will miss him … welcome received !!!
The only bear with me … I’m a beginner with all this !!!
-
This post is deleted! -
This post is deleted! -
Making serious progress with this…
Fighting with syslinux.cfg, trying to get it’s code right.
-
That’s what I have so far… it’s not working.
-
ditched syslinux.
etherboot seems very promising and I had more luck with it, and it’s simpler to use.
-
I got it working with this iso.
ipxescript:
#!ipxe echo -n Please enter tftp server: && read next-server && goto netboot :netstart dhcp && goto netboot || goto netstart :netboot ping -c 1 ${next-server} || goto netstart chain tftp://${next-server}/default.ipxe || shell -
@cml Can you elaborate?
-
Sure.
I followed the instructions in the Building undionly.kpxe wiki entry.
Except for the ipxescript I used the previous script and the command to build was:
make bin/ipxe.iso EMBED=ipxescriptI wrote the iso using dd: “dd if=ipxe.iso of=/dev/sdb bs=4M” replace sdb with your drive
-
I just saw that went far … now I could explain how official … that is, if you meet the requirements to which I am bound?
I hope ancioso your answers !!! Thank you all for your contributions !!!
-
Well, I tell them that I took the time to try the ISO CML … and the truth … it’s very nearly what I need … exept for a question … if I need to install 10 pcs at the same time, having this ISO on a flash drive … it could perform smoothly … nor any conflict with my dhcp ??? From what I saw, putting the direction of the mist, it goes directly to the …
I have to get the hat !!! Spectacular !!!
Surely … I will continue to consult for further progress and learning!
Thank you very much !!!
