HP Stream 11 Pro
-
Can you upgrade the SVN FOG Server you have and try again?
-
Were you able to upload an image with this model? We received one and we are experiencing the same results with FOG 1.2.0. I also tried the latest SVN today with the latest stable kernel and Tom’s kernel. I am using ubuntu 14. Any suggestions will be appreciated.
[url=“/_imported_xf_attachments/1/1801_hp.jpg?:”]hp.jpg[/url]
-
We are using this USB to ethernet: [FONT=Calibri][COLOR=#1f497d]USB to Ethernet adapter (XZ613AA)[/COLOR][/FONT]
-
USB NIC support is still kind of new in iPXE. We try to help getting things to work but be prepared to be part of this process too. We need your help to be able to make things work.
@Cody Lee: Which USB adapter exactly do you have? Were you able to make FOG work with your adapter?
@Mike2014: Could you please take a another picture earlier in the process (what do you see before all the dots flash down the screen?). I am still trying to figure out which chip is used in you XZ613AA NIC.
It would be helpful if you could boot any kind of live cd (e.g. ubuntu) on a client with the adapter connected. Post the output of ‘lsusb -t’ -
Here you go…
[url=“/_imported_xf_attachments/1/1802_HPStream.jpg?:”]HPStream.jpg[/url]
-
Asix USB Dongle…
[url=“/_imported_xf_attachments/1/1803_AsixUSBDongle.jpg?:”]AsixUSBDongle.jpg[/url]
-
We have an HP USB Ethernet Adapter
[url]http://h30094.www3.hp.com/product.aspx?sku=10297330&pagemode=ca[/url] -
Here is the output of “lsusb -t”
[url=“/_imported_xf_attachments/1/1804_lsusb-t.jpg?:”]lsusb-t.jpg[/url]
-
Mike,
If you’re running on Development/Trunk. iPXE pushed a few more updates in relating ipxe with USB. Please update to 3139 and let me know if this is still occurring.
Thank you,
-
It boots past init.xz…ok and locks up.
-
What’s the error it locks up with?
-
I get this after I select: “Quick Registration and Inventory” from the FOG menu. I checked /var/log/apache2 but there are no errors about this…
[url=“/_imported_xf_attachments/1/1805_init-xz-ok.jpg?:”]init-xz-ok.jpg[/url]
-
When did you update?
Please try re-running the updater as if it was last night, I know sourceforge was having problems. Based on what I can tell, you could confirm this by running:
[code]ls -lhart /var/www/fog/service/ipxe/[/code]
I just need to see the file sizes.
-
8:34am
[url=“/_imported_xf_attachments/1/1807_update.jpg?:”]update.jpg[/url]
-
Okay, update one more time.
I’ve added an ability to the FOG System to enable kernel debug.
Can you update, then update the schema.
Once updated (gui and all) go to FOG Configuration->FOG Settings->FOG Boot Options and click the checkbox on FOG_KERNEL_DEBUG.
Then see if you can capture a video or snapshot of the screen please?
-
Updated to 3141 and checked the FOG kernel debug but still getting the same message: “/bzImage… Ok — /init.xz… OK”
-
Are you using undionly.kpxe or undionly.kkpxe?
-
[S]Yes.[/S] I tried both.
-
If I use undionly.kkpxe it locks up here: “/bzImage… Ok — /init.xz… OK”
If I use undionly.kpxe it locks up here: “iPXE initialising devices…” -
Can you try using the ipxe.pxe file?
