Integrating Hirens Boot 15.2 into fog 1.2.0
-
Oh… where did you do the mount part? in the menu? I don’t think that’s where it goes normally… maybe it’s possible, but probably not…
You’d mount it permanently on your FOG server. Then, the host would access those files via Apache exactly the same way it would access the FOG kernel and init and such.
-
I have mounted the iso from the server through a terminal, can’t give it 777 as it’s read only
root@fog:/var/www/fog/service/ipxe/iso# mount -t iso9660 ubuntu-15.04-desktop-amd64.iso ubuntu -o loop,uid=33,gid=33 mount: warning: ubuntu seems to be mounted read-only. root@fog:/var/www/fog/service/ipxe/iso# ls -l total 1467942 dr-xr-xr-x 1 www-data www-data 2048 Apr 22 22:30 ubuntu -rw-r--r-- 1 fog www-data 1150844928 Jun 24 08:12 ubuntu-15.04-desktop-amd64.isoThe above didn’t work, as in didn’t get as far, the owner needs to be fog.
I think the part I need to work out how to change is the nfs mount that points to /cdrom in the error message i posted below -
This is what it looks like after vmlinuz.efi and initrd.lz get loaded
-
@Pikmin ISO9660 is read-only, you can mount it only on RO.
-
I understand that, just don’t get what I’m doing wrong when following the steps in this thread
EDIT:
Okay all good now, no mention of having to export the path to the mount to NFS. I am new to this, didn’t know -
Just got this working for me. In case anybody wants the steps:
First in your /etc/exports add this line:
/var/www/fog/iso/15.04_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)Then restart your nfs server. If you’re running Ubuntu it’s sudo service nfs-kernel-server restart
Next, extract the Ubuntu iso to a direcotry named 15.04_64 in your /var/www/fog/iso directory.
In your Advanced menu use this:
:MENU
menu
item --gap – ---------------- iPXE boot menu ----------------
item ubuntu15.04_64 Boot Ubuntu 15.04
item return return to previous menu
:ubuntu15.04_64
set path /fog/iso/15.04_64
set nfs_path /var/www/fog/ISO/15.04_64
kernel http://${fog-ip}${path}/casper/vmlinuz.efi || read void
initrd http://${fog-ip}${path}/casper/initrd.lz || read void
imgargs vmlinuz.efi root=/dev/nfs boot=casper netboot=nfs nfsroot=${fog-ip}:${nfs_path} ip=dhcp splash quiet – || read void
boot || read void
goto startHopefully it works for you too. You don’t have to set the variables. I just did it that way in case I ever have to change where the iso directory lives.
-
Thanks aaoyagi, when I realised nfs mount was needed it was easy.
Do you happen to have a working menu for parted magic? I’ve tried both ways with the iso mounted and exported and just path to the iso
Throws an error both times.UPDATE: looked over it one more time and tried what Tom suggested- removed raw and iso
chain memdisk ||Working fine, thank you kindly
-
@aaoyagi Thank you so much you don’t know how long ive been trying to figure this out. If I could id shake your hand, but for now the best I can do is IS be amazed at how awesome what you figured out is. Again thank you.
-
@aaoyagi said:
Just got this working for me. In case anybody wants the steps:
First in your /etc/exports add this line:
/var/www/fog/iso/15.04_64 *(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)Then restart your nfs server. If you’re running Ubuntu it’s sudo service nfs-kernel-server restart
Next, extract the Ubuntu iso to a direcotry named 15.04_64 in your /var/www/fog/iso directory.
In your Advanced menu use this:
:MENU
menu
item --gap – ---------------- iPXE boot menu ----------------
item ubuntu15.04_64 Boot Ubuntu 15.04
item return return to previous menu
:ubuntu15.04_64
set path /fog/iso/15.04_64
set nfs_path /var/www/fog/ISO/15.04_64
kernel http://${fog-ip}${path}/casper/vmlinuz.efi || read void
initrd http://${fog-ip}${path}/casper/initrd.lz || read void
imgargs vmlinuz.efi root=/dev/nfs boot=casper netboot=nfs nfsroot=${fog-ip}:${nfs_path} ip=dhcp splash quiet – || read void
boot || read void
goto startHopefully it works for you too. You don’t have to set the variables. I just did it that way in case I ever have to change where the iso directory lives.
Added to wiki
-
This post is deleted! -
@aaoyagi Just made major changes to this WiKi article and one other in order to ingegrate this and others into one single article.
https://wiki.fogproject.org/wiki/index.php/Include_any_ISO_in_the_FOG_Bootmenu
Please, any future instructions or tutorials about adding an ISO via FOG should be added to the above WiKi article. Thanks for giving an awesome little tutorial @aaoyagi
-
A note that clonezilla works using the method.
-
I know this is an old thread, I’ve read it entirely, and I’ve read the wiki too (this page)but I can’t find the files mentioned here. In my installation I don’t have the folder: /tftpboot/pxelinux.cfg/ in where should be the “default” file, which I assume is where the default menu is. I need help finding the files that i have to edit to be able to include other isos to the boot menu.
Sorry for the bad english.
Thank you.Hugo Thebas
-
@hugothebas Are you on 1.2 or on trunk? Trunk doesn’t have pxelinux.cfg anymore since it switched to iPXE rather than PXE because of the added functionality.
-
@Quazz 1.2.0 pxelinux.cfg did not exist, but I brought it back in trunk in the case of a requirement per chainloading or issues working with ipxe files.
-
@Tom-Elliott Right, got them mixed up, my bad.
As to answer his question then, you need to add it in the advanced menu in 1.2 using iPXE formatting.
-
@hugothebas This article applies to 1.2.0 and below: https://wiki.fogproject.org/wiki/index.php?title=Advanced_Boot_Menu_Configuration_options
