Multicast issue - stuck on starting to restore image
-
Greetings, I am using Fog 1.2 and trying to multicast a windows 7 image.
when the fist partition /dev/sda1 is restored I get the error , target partition size (212mb is smaller that source 213mb) use option -C to disable size checking(dangerous), it then goes on to with the screen showing starting to restore image to device /dev/sda2, but just hangs on this screen.
please see output from /opt/fog/log/multicast.log.udpcast.10adminuser@FOG033srv:/opt/fog/log$ tail -f multicast.log.udpcast.10 Udp-sender 20120424 Using mcast address 235.168.1.9 UDP sender for (stdin) at 195.168.1.9 on eth1 Broadcasting control to 224.0.0.1 New connection from 195.168.1.12 (#0) 00000009 New connection from 195.168.1.22 (#1) 00000009 Starting transfer: 00000009 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=1459 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=1459 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=1459 Bad command 0300 Bad command 0300 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=14464 Dropping client #0 because of timeout Disconnecting #0 (195.168.1.12) Dropping client #1 because of timeout Disconnecting #1 (195.168.1.22) bytes= 4 552 912 re-xmits=0000000 ( 0.0%) slice=0112 - 0 Transfer complete. Udp-sender 20120424 Using mcast address 235.168.1.9 UDP sender for (stdin) at 195.168.1.9 on eth1 Broadcasting control to 224.0.0.1Thanks for your help,
Denis -
I have the same problem :
Udp-sender 20120424 Using mcast address 232.168.33.70 UDP sender for (stdin) at 192.168.33.70 on eth0 Broadcasting control to 224.0.0.1 New connection from 192.168.33.122 (#0) 00000009 New connection from 192.168.33.123 (#1) 00000009 Starting transfer: 00000009 bytes= 137 re-xmits=0000000 ( 0.0%) slice=0112 - 0 Transfer complete. Disconnecting #0 (192.168.33.122) Disconnecting #1 (192.168.33.123) Udp-sender 20120424 Using mcast address 232.168.33.70 UDP sender for (stdin) at 192.168.33.70 on eth0 Broadcasting control to 224.0.0.1 New connection from 192.168.33.122 (#0) 00000009 New connection from 192.168.33.123 (#1) 00000009 Starting transfer: 00000009 bytes= 1 801 072 re-xmits=0000000 ( 0.0%) slice=0112 - 0 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=2755 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=2755 Bad command 0300 Bad command 0300 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Timeout notAnswered=[0,1] notReady=[0,1] nrAns=0 nrRead=0 nrPart=2 avg=17763 Dropping client #0 because of timeout Disconnecting #0 (192.168.33.122) Dropping client #1 because of timeout Disconnecting #1 (192.168.33.123) bytes= 4 672 304 re-xmits=0000000 ( 0.0%) slice=0112 - 0 Transfer complete. cat: erreur d'écriture: Relais brisé (pipe) Udp-sender 20120424 Using mcast address 232.168.33.70 UDP sender for (stdin) at 192.168.33.70 on eth0 Broadcasting control to 224.0.0.1Thanks for your help,
-
I edited your messages, please use </> to past your code
