Uploading an image from partition layout: /dev/mmcblk0
-
On the hosts with these particular devices, set the host device argument to:
[code]/dev/mmcblk[/code]Does this help?
-
Unfortunately, no
I tried on SVN 2389 and now on 2411.I will be continuing on my quest this evening and into the weekend…
I’ve made several custom kernels, tried every disk/kernel argument related to mmcblk partitions I can think of…nothing. But so close, nonetheless…
-
I should also mention that even though I can easily send inventory on these now, FOG still has yet to recognize the hard drive in the inventory report.
I can deploy a debug task to one of these and I cannot get anything from fdisk, gdisk, etc. However, the latest builds of Clonezilla properly recognize the partition layout…I’m wondering if getting one of the disk utilities working with these hard drives would be all it would take to get these to upload an image…
-
I want to get these working, so fdisk -l doesn’t display the disk either?
-
Nope. I run fdisk -l and it just brings me to a new prompt.
Thanks a million for your help, Tom.
-
I hate asking, but can you get to a terminal prompt within clonezilla and get the contents of the information?
[code]lsusb[/code]
I’m under suspicion the FOG issues is likely related to the fact that eMMC is typically what’s kind of found in USB Flash sticks.
As I don’t have any drivers included in the kernel to support USB Disks (hence being able to keep a USB hdd connected without overwriting the wrong drive) I think this is where our problem lies.
-
Yep, give me just a bit and I’ll do that.
In the meantime, here are my disk reports from when I’ve captured an image with Clonezilla.
[url=“/_imported_xf_attachments/1/1422_mmcblk0.zip?:”]mmcblk0.zip[/url]
-
Okay
I am building mmc support into the kernel. I did a lot of research and hopefully the new kernels will, at the least, recognize the disk. -
[FONT=Consolas]lsusb[/FONT]
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 154b:0053 PNY (Flash drive used to load Clonezilla into my RAM)
Bus 001 Device 003: ID 0b05:17e0 ASUSTek Computer, Inc.
Bus 001 Device 002: ID 0b05:17e4 ASUSTek Computer, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -
Awesome, thank you! I will test it once you’ve made it.
Also, it looks like I forgot to mention that these are 32-bit devices.
-
Kernels are ready:
[url]https://mastacontrola.com/fogboot/kernel/bzImage[/url] (64bit)
[url]https://mastacontorla.com/fogboot/kernel/bzImage32[/url] (32bit)I don’t know if it will work properly, but can you boot the system and see if it at least can recognize the disks now?
-
First off, sorry for my delayed response. I didn’t receive an email notification of a response to my thread.
The kernel panics, but, it then spits out two lines before locking up:
[B]VFS: Mounted root (ext2 filesystem) on device 1:0.[/B]
[B]devtmpfs: mounted[/B] -
Getting closer! I’m gonna try various arguments and see if I can coax this any further.
-
What kernel did you try?
The bzImage32 should be the one you need and if you replaced your original bzImage32 with that, things should work.
-
I used the bzImage32. I was able to launch a debug task by setting argument /dev/mmcblk. Still can’t see anything with fdisk, gdisk, etc.
Gonna continue trying…
-
Good news: I was able to hit the PartClone screen while trying to upload! I just had to set the primary disk to /dev/mmcblk0.
It then threw an error about not being able to open /dev/mmcblk0 and reboots, but that’s ok because I’m so close now! It seems I just need to find the right disk/argument and these will be FOG compatible
-
Tom, if you or anyone knows where I should go from here I’d appreciate it!
[url=“/_imported_xf_attachments/1/1427_Partclone Error.jpg?:”]Partclone Error.jpg[/url]
-
Can you remove the 0?
mmcblk should find mmcblk1 or mmcblk2 as needed.
-
Same error, only saying “clone: open /dev/mmcblk error” instead.
I tried a bunch of kernel arguments yesterday…to no avail.
Do you think using Partclone v0.2.73 would help at all?
-
I don’t think it’s the partclone having the issue, rather it’s the kernel not recognizing the disk.
You stated in debug, when you fdisk -l you show no disks?
