Windows 7 Deployment FOG- SAD2 Driver tool
-
[quote=“dahhunter, post: 10291, member: 3244”]I followed all the steps very carefully… and at the “Set up is Checking video Performance”
I get a Install Windows Error
read error in the C:\Windows\pather\unattend.xmlHmm. a bit confused cause
Here is the Screen shot:
[IMG]http://i658.photobucket.com/albums/uu305/dahhunter/sysprep_zps5c58b713.jpg[/IMG][/quote]
Sorry I thought I replied to this.The problem appears to be with your unattend file. In particular something you have specified possibly in shell setup module. If you could upload the file we can have a look, you may need to zip the file first.
-
I’m getting an error that windows cannot open dpinst.7z. Any help would be appreciated.
-
[quote=“wizard210, post: 10657, member: 894”]I’m getting an error that windows cannot open dpinst.7z. Any help would be appreciated.[/quote]
Are you using the version I specified in the original post? Or a newer version? I use version SAD2-111118 of the SAD2 tool.
-
Hi all
First off thanks for a greate guide
I just wantede to let you know that this guide works without issues on latest version of SAD2 (v120520)wizard210 it sounds like you have been messing around with eighter the bin folder inside drivers or you made changes to the script so it is now unable to find the bin folder.
Regards
Bjarke -
Can anybody re-post the SAD tool? It has been removed from the original site and I could not download it.
-
[quote=“YuYo, post: 10903, member: 3300”]Can anybody re-post the SAD tool? It has been removed from the original site and I could not download it.[/quote]
It is still on the website:[url]http://forum.driverpacks.net/viewtopic.php?id=5336[/url]
-
[quote=“andyroo54, post: 10920, member: 267”]It is still on the website:
[url]http://forum.driverpacks.net/viewtopic.php?id=5336[/url][/quote]
The links are broken and take you to a Mediafire error page.
-
[quote=“YuYo, post: 10923, member: 3300”]The links are broken and take you to a Mediafire error page. :([/quote]
So they are… looks like some one has already reported this in the thread, but here is the only version I have which is 111118, the CMD script is slightly modified by me. -
Got it, thanks
-
I am having some issues with SAD working. I downloaded the OP’s DP_Install_Tool.txt and pasted all of that into the file on the C drive, and I get the issues in the photos I’ve attached.
I hit OK to the prompt in the 1st photo, and it proceeds to extract the files as shown in the 2nd photo, but after it extracts them all, it gives me the error you see in the 3rd photo. I’ve also attached a .txt file that contains the DP_Install_Tool that I am using.
Any help would be greatly appreciated! Thanks!
[url=“/_imported_xf_attachments/0/265_image.jpeg?:”]image.jpeg[/url][url=“/_imported_xf_attachments/0/266_image-1.jpeg?:”]image-1.jpeg[/url][url=“/_imported_xf_attachments/0/267_image-2.jpeg?:”]image-2.jpeg[/url][url=“/_imported_xf_attachments/0/268_DP_Install_Tool.txt?:”]DP_Install_Tool.txt[/url]
-
If you downloaded a new version of the SAD2 tool, you really should use the version included there, the modifications neede to make it fit this project is minimal, and there are a lot of other changes in the script now. If you want to use the DP_Install_Tool.txt included in this guide, then make sure your also using the same SAD2 version else you will get errors.
-
v111118 brings me to mediafire and says “Invalid or deleted file”. Is it available anywhere else, of can somebody upload it?
It seems as though only the most current version is available. I tried everything between 111118 and the latest, and only the latest works.
EDIT: Nevermind, I see up a couple posts somebody uploaded it. I tried it and it works perfect! Thanks so much!
-
Hi Andyroo54
,Did u manage to upload the new pdf tutorial with the added/updated instructions/informations based from the comments and suggestions?
Thanks a lot.
Lon
-
[quote=“mllinang, post: 11174, member: 3541”]Hi Andyroo54
,Did u manage to upload the new pdf tutorial with the added/updated instructions/informations based from the comments and suggestions?
Thanks a lot.
Lon[/quote]
Negative, but the original thread posts have been updated.I suggest reading the whole thread first though. But the instructions are still good.
-
[quote=“Bjarke, post: 10818, member: 3320”]Hi all
First off thanks for a greate guide
I just wantede to let you know that this guide works without issues on latest version of SAD2 (v120520)wizard210 it sounds like you have been messing around with eighter the bin folder inside drivers or you made changes to the script so it is now unable to find the bin folder.
Regards
Bjarke[/quote]
I want to use the newest script too, which is in my case 121126, but it is “completely” rewritten.Does somebody still have version 120520 (because it is down)?
Or has somebody an idea where to insert the code in 121126?If this could be solved, others would be helped who whant to use an updatet version.
For now i use the original version, which can still be downloaded here: [url]http://dropcanvas.com/k9iq0[/url]
Nice work. Thanks.
-
hi Andyroo54
when i boot a vm , the Fog Computer Cloning Solution ( to peform Registration and Inventory) just appears and booting will be directed to HDD. i test on a physical machine booting nic on FOG and it was fine.
Note that my Fog Server is also a VM (from Vsphere).
I created also vmware_user with no password but still the same.
What could be the solution?
-
[quote=“mllinang, post: 11356, member: 3541”]hi Andyroo54
when i boot a vm , the Fog Computer Cloning Solution ( to peform Registration and Inventory) just appears and booting will be directed to HDD. i test on a physical machine booting nic on FOG and it was fine.
Note that my Fog Server is also a VM (from Vsphere).
I created also vmware_user with no password but still the same.
What could be the solution?[/quote]
hi as this is not a question regarding this tutorial, can you start a new thread in the help section to keep this thread on track.
thanks
-
this was a very good tutorial… thanks for the Author…
My only concern now is that even if i change the hostname, restarted the machine and after logging in back it returns to the original hostname… what to do?
-
[quote=“mllinang, post: 11391, member: 3541”]this was a very good tutorial… thanks for the Author…
My only concern now is that even if i change the hostname, restarted the machine and after logging in back it returns to the original hostname… what to do?[/quote]
you need to change hostname via FOG web gui or disable fog renaming via FOG web ui -
i see… so this windows i just deployed cannot be renamed at all?
and will redploy an image after disabling fog renaming…
