Unable to start task; Unable to connect to TFTP server

[ironpotato]

[QUOTE]easiest way? just download the installer and run it. it will detect the settings you used installed oringinally with and use those.[/QUOTE]
Thank you, and noted.

But realistically, is there any reason that this issue would be fixed by updating? I’m almost certain it’s something set incorrectly, or a problem with our network. I’m just not sure where that problem would be.

After the hassle I went through to get PXE booting working the first time, I’m not looking forward to starting from scratch… But if I could get everything working on .32 I would feel better about upgrading. Seeing as how .32 was the version everyone was using from 2011 until a few months ago I feel like it’s not something broken in the release.

[David Herrington]

Did you try what I suggested in my last post?

[ironpotato]

I’m trying it now, I’ll let you know shortly

[ironpotato]

Interestingly enough, since I’ve rebooted, I’ve now lost internet connectivity on the Wheezy box.

I can still ssh into the box, and wheezy can see my desktop, but it doesn’t see the laptop I’m trying to image. Before I rebooted everything was fine…

Edit:
Okay… So this may have been the problem. There was a typo in my /etc/networking/interfaces.

I had gatewau, instead of gateway… Here’s to hoping. (How I got to google before I have no idea)

[ironpotato]

This post is deleted!

[ironpotato]

That didn’t help in the slightest…

And sorry for the triple post in here.

[David Herrington]

And the password for your storage node is the same as the one in the Fog configuration?
I may be wrong but I believe that password also has to be the same for the user “fog”

[Tom Elliott]

Upgrading fixes many things but may not fix everything for you.

Do you start getting internet if you run:
[code]sudo echo “8.8.8.8” > /etc/resolv.conf[/code]

[ironpotato]

[quote=“David Herrington, post: 34047, member: 3549”]And the password for your storage node is the same as the one in the Fog configuration?
I may be wrong but I believe that password also has to be the same for the user “fog”[/quote]

I’ve changed the password for everything except for the web UI. Whenever I try to change the web password it tells me that it’s invalid.

Now that I think about it, are special characters a problem in the passwords? I have an asterisk in there.

[Tom Elliott]

THey are not a problem, but it’s likely not set in the VALID CHARS Setting.

[ironpotato]

Changed all the passwords to remove the asterisk. That wasn’t it.

[Tom Elliott]

As you’re running 0.32, I believe you need to make the password change in /var/www/fog/commons/config.php as well.

[ironpotato]

[quote=“Tom Elliott, post: 34055, member: 7271”]As you’re running 0.32, I believe you need to make the password change in /var/www/fog/commons/config.php as well.[/quote]

Sorry, left for home yesterday. I’ve already done this, it’s stated in the wiki.