Unable to start task; Unable to connect to TFTP server
-
Why did you use such an old version?
1.2 was just released on the 21stAnyways, open your Fog web interface, click “Fog Configuration” and then “FOG Settings” and copy the password for “FOG_TFTP_FTP_PASSWORD” into the config file
Restart the server and see if it starts working for you -
I’m very much aware, the new version was released after I had this one setup. .32 is all I could find at the time that was considered stable if I recall.
Also, I remember when version 1 was released another user I know said it broke everything for him. So I was a bit wary.
But that was another question I had, what is the easiest way to go about upgrading?
-
easiest way? just download the installer and run it. it will detect the settings you used installed oringinally with and use those.
best way? build a new server, migrate your files and host list over
either way, pay attention to the inline documentation, there have been a few changes. -
[QUOTE]easiest way? just download the installer and run it. it will detect the settings you used installed oringinally with and use those.[/QUOTE]
Thank you, and noted.But realistically, is there any reason that this issue would be fixed by updating? I’m almost certain it’s something set incorrectly, or a problem with our network. I’m just not sure where that problem would be.
After the hassle I went through to get PXE booting working the first time, I’m not looking forward to starting from scratch… But if I could get everything working on .32 I would feel better about upgrading. Seeing as how .32 was the version everyone was using from 2011 until a few months ago I feel like it’s not something broken in the release.
-
Did you try what I suggested in my last post?
-
I’m trying it now, I’ll let you know shortly
-
Interestingly enough, since I’ve rebooted, I’ve now lost internet connectivity on the Wheezy box.
I can still ssh into the box, and wheezy can see my desktop, but it doesn’t see the laptop I’m trying to image. Before I rebooted everything was fine…
Edit:
Okay… So this may have been the problem. There was a typo in my /etc/networking/interfaces.I had gatewau, instead of gateway… Here’s to hoping. (How I got to google before I have no idea)
-
This post is deleted! -
That didn’t help in the slightest…
And sorry for the triple post in here.
-
And the password for your storage node is the same as the one in the Fog configuration?
I may be wrong but I believe that password also has to be the same for the user “fog” -
Upgrading fixes many things but may not fix everything for you.
Do you start getting internet if you run:
[code]sudo echo “8.8.8.8” > /etc/resolv.conf[/code] -
[quote=“David Herrington, post: 34047, member: 3549”]And the password for your storage node is the same as the one in the Fog configuration?
I may be wrong but I believe that password also has to be the same for the user “fog”[/quote]I’ve changed the password for everything except for the web UI. Whenever I try to change the web password it tells me that it’s invalid.
Now that I think about it, are special characters a problem in the passwords? I have an asterisk in there.
-
THey are not a problem, but it’s likely not set in the VALID CHARS Setting.
-
Changed all the passwords to remove the asterisk. That wasn’t it.
-
As you’re running 0.32, I believe you need to make the password change in /var/www/fog/commons/config.php as well.
-
[quote=“Tom Elliott, post: 34055, member: 7271”]As you’re running 0.32, I believe you need to make the password change in /var/www/fog/commons/config.php as well.[/quote]
Sorry, left for home yesterday. I’ve already done this, it’s stated in the wiki.
