TFTP Boot Issue
-
When requesting help, please include the OS and FOG versions you are using and if you have modified anything that may have an impact, list it also.
It appears you kernel (bzImage) is loading, and the init file (init.gz) is also loading, but having a problem with something else. I don’t think this is a PXE boot problem because at this point, you have finished PXE and are now in the FOG kernel and boot image.
Has this exact machine/hardware worked on your FOG system in the past? Very important to know whether your FOG is not working, or you just have new hardware that may need additional drivers/settings.
-
You can try to use the WEB ui to upgrade the kernel. Or you can download a new bzImage to another folder. backup your original, and then overwrite the bzImage file in /tftpboot/fog/kernel with the new one. You may have to chown/chmod.
-
You can also try my 32 bit kernel:
[code]wget -O /tftpboot/fog/kernel/bzImage http://mastacontrola.com/fogboot/kernel/bzImage32[/code]
-
I am running Ubuntu 12.04 32-bit. I am using Fog 0.32. Yes it was functioning properly until yesterday when I had to shut it down and restarted it this morning. I have not made any changes, it is running on a virtual machine in VMware.
-
Can you please try downloading the kernel I stated above.
Your issue with the “fuzzy” screen is because of the kernel you’re currently using.
-
What is running in VMWare? the FOG server or the client or both? Maybe a VMware hardware version upgrade/change could have affected this. Sometimes VM’s are set to upgrade HW on the next boot cycle.
-
Okay, I installed your kernel and everything appears to be working normal again, it is now getting me to the registration and inventory screen. The one thing I noticed through all of this is that now the bzImage file is back to the config looking file instead of just numbers on a sheet, see below…
BEFORE
[ATTACH=full]1203[/ATTACH]AFTER
[ATTACH=full]1204[/ATTACH]Thanks for the help!!
[url=“/_imported_xf_attachments/1/1203_FOG.gif?:”]FOG.gif[/url][url=“/_imported_xf_attachments/1/1204_FOG1.gif?:”]FOG1.gif[/url]
-
Mine always looks like this
[ATTACH=full]1205[/ATTACH][url=“/_imported_xf_attachments/1/1205_Screen Shot 2014-07-24 at 9.34.33 AM.png?:”]Screen Shot 2014-07-24 at 9.34.33 AM.png[/url]
-
The bzImage is not a config file, but a binary kernel.
The “graphic” display is not necessarily an accurate representation of what the file actually is.
This is why I always prefer cli representations. Another way to test is run the command:
[code]file /tftpboot/fog/kernel/bzImage[/code] -
Try adding kernel argument “nomodeset video=uvsafb:mode_option=1024x768-16”, without quotes
-
While I understand what you’re trying to do, my kernel’s have no uvesab stuff and would not require additional parameters.
-
Good to know…That means “video=uvsafb:mode_option=1024x768-16” would not make any difference, right?
