Problem after upgrading from 0.32 to 1.1.1
-
Is option 67 set to undionly.kpxe? Is it possible your network needs shorter name? What happens if you create a link as pxelinux.0?
[code]sudo ln -s /tftpboot/undionly.kpxe /tftpboot/pxelinux.0[/code]
-
From a Windows 7 machine can you run the folowing where x.x.x.x is your fog server ip. You may need to install the service under your “Add Windows features/services”
[I][SIZE=12px][CODE]tftp x.x.x.x get undionly.kpxe[/CODE][/SIZE][/I]
-
[quote=“Wolfbane8653, post: 30449, member: 3362”]From a Windows 7 machine can you run the folowing where x.x.x.x is your fog server ip. You may need to install the service under your “Add Windows features/services”
[I][SIZE=12px][CODE]tftp x.x.x.x get undionly.kpxe[/CODE][/SIZE][/I][/quote]
Transfer successful
-
[quote=“Tom Elliott, post: 30448, member: 7271”]Is option 67 set to undionly.kpxe? Is it possible your network needs shorter name? What happens if you create a link as pxelinux.0?
[code]sudo ln -s /tftpboot/undionly.kpxe /tftpboot/pxelinux.0[/code][/quote]
I get a “no such file or directory” on that because pxelinux.0 has a .old on the end of it now. I guess I could drop the suffix?
As to option 67. I am guessing this is somehow the issue, so is there a stupid proof way to check this? In my config files both in dhcp and dhcp3 I am pointed to undionly.kpxe.
-
[quote=“NickConrad, post: 30450, member: 24656”]Transfer successful[/quote]
This shows that the file exists and it is accessible to the network without firewall conflicts. Next I would direct you to your option 66 and 67 settings but Tom is already on that. Soooo…keep with him.
-
[quote=“Wolfbane8653, post: 30452, member: 3362”]This shows that the file exists and it is accessible to the network without firewall conflicts. Next I would direct you to your option 66 and 67 settings but Tom is already on that. Soooo…keep with him.[/quote]
Will do, and thanks for your help thus far
-
[code]sudo ln -s /tftpboot/undionly.kpxe /tftpboot/pxelinux.0[/code]
Will create the link for you. I’m already aware that pxelinux.0 doesn’t exist. What that command “no such file or directory” is telling you and maybe me is that /tftpboot/undionly.kpxe doesn’t exist on your system. This might very well be your issue.
-
[quote=“Tom Elliott, post: 30454, member: 7271”][code]sudo ln -s /tftpboot/undionly.kpxe /tftpboot/pxelinux.0[/code]
Will create the link for you. I’m already aware that pxelinux.0 doesn’t exist. What that command “no such file or directory” is telling you and maybe me is that /tftpboot/undionly.kpxe doesn’t exist on your system. This might very well be your issue.[/quote]
the full error was “pxelinux.0: no such file or directory” which is why I figured it was that.
As for undionly, it’s in tftboot as a .kkpxe, .kpxe, .kpxe.INTEL, and .pxe.
-
[quote=“NickConrad, post: 30457, member: 24656”]the full error was “pxelinux.0: no such file or directory” which is why I figured it was that.
As for undionly, it’s in tftboot as a .kkpxe, .kpxe, .kpxe.INTEL, and .pxe.[/quote]
Tom, the following is my dhcpd.conf located in /etc/dhcp3, did I goof somewhere along the way here?
[INDENT=1]use-host-decl-names on;[/INDENT]
[INDENT=1]ddns-update style interim;[/INDENT]
[INDENT=1]ignore client-updates ;[/INDENT]
[INDENT=1]next-server xxx.xxx.xxx.xxx.[/INDENT]
[INDENT=1] [/INDENT]
[INDENT=1]subnet xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx {[/INDENT]
[INDENT=2]option subnet-mask xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=2]range dynamic-bootp xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=2]default-lease-time 216000;[/INDENT]
[INDENT=2]max-lease-time 43200;[/INDENT]
[INDENT=2]option domain-name-servers xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=3]option routers xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=3] [/INDENT]
[INDENT=2]filename “undionly.kpxe”;[/INDENT]
[INDENT=1]}[/INDENT]
[INDENT=2] [/INDENT] -
[quote=“NickConrad, post: 30463, member: 24656”]Tom, the following is my dhcpd.conf located in /etc/dhcp3, did I goof somewhere along the way here?
[INDENT=1]use-host-decl-names on;[/INDENT]
[INDENT=1]ddns-update style interim;[/INDENT]
[INDENT=1]ignore client-updates ;[/INDENT]
[INDENT=1]next-server xxx.xxx.xxx.xxx.[/INDENT]
[INDENT=1] [/INDENT]
[INDENT=1]subnet xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx {[/INDENT]
[INDENT=2]option subnet-mask xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=2]range dynamic-bootp xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=2]default-lease-time 216000;[/INDENT]
[INDENT=2]max-lease-time 43200;[/INDENT]
[INDENT=2]option domain-name-servers xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=3]option routers xxx.xxx.xxx.xxx;[/INDENT]
[INDENT=3] [/INDENT]
[INDENT=2]filename “undionly.kxpe”;[/INDENT]
[INDENT=1]}[/INDENT]
[INDENT=2] [/INDENT]
[/quote]if that is a direct copy, i see the issue
undionly.kxpe should be undionly.kpxe
-
[quote=“Junkhacker, post: 30464, member: 21583”]if that is a direct copy, i see the issue
undionly.kxpe should be undionly.kpxe[/quote]
not a direct copy, so just a dumb typo. Good catch, though, you made me double-take for a second between screens :eek:
-
Any chance we can get a direct copy? PM it to Tom or something.
-
DHCP Server Configuration file.
see /usr/share/doc/dhcp*/dhcpd.conf.sample
This file was created by FOG
use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
next-server 10.6.116.243;
filename “undionly.kpxe”;subnet 10.6.116.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
range dynamic-bootp 10.6.116.10 10.6.116.254;
default-lease-time 21600;
max-lease-time 43200;
option domain-name-servers 10.6.116.246;
option routers 10.6.116.246;
filename “undionly.kpxe”;
} -
Just to see what would happen, I made a symlink like Tom had suggested, but I made it to pxelinux.0.old. No change when booting a client over PXE
-
Do you have another DHCP server on your network, or is FOG the only one?
-
[quote=“Tom Elliott, post: 30474, member: 7271”]Do you have another DHCP server on your network, or is FOG the only one?[/quote]
I have my DHCP service running on Active Directory as well, though it doesn’t have a scope for the IP that my fog server is on
-
so with TFTP off, the message I get at PXE boot is the expected TFTP . . . . . until it finally times out. This is making me think the issue is specific to TFTP. I went and checked my username / password, and for some reason the web interface was dropping part of the password for the user I provided. I changed the user to something that has the same access but a plain text password. The web interface likes that just fine, but I get the same
TFTP.
ExitingScreen when booting over PXE. Are there other usual suspects in the TFTP settings I should be cluing in on?
-
I have problems with fog 1.1.1 working correctly if the GUID of the computer is not displayed. Fog 1.1.1 is ok if the GUID is displayed, however if it sees FFFFFF …etc it says not for us.
