Error When Imaging
I’ve been using this same image all throughout testing 0.33b and now I’m getting this error(see attached picture) when attempting to push the image to a machine. I’ve pushed this image successfully to over 40 machines, in the past few months.
What could be the issue?
[url="/_imported_xf_attachments/0/833_imaging error.jpg?:"]imaging error.jpg[/url]
Didn’t know about that option…
Tom Elliott last edited by
The error you’re seeing is a use of partimage where partclone is in use.
Go to FOG Configuration->FOG Settings and enable the FOG_LEGACY_FLAG_IN_GUI option
reset this image from partimage type to partclone and try again.
I’m looking at this error in the picture that I originally posted…
“/usr/share/fog/lib/funcs.sh: line 84: 2484 Segmentation fault”
I assume that this is what is causing the failure.
As for the “Published Kernels” I believe that the last time I successfully pushed out an image was pre- April 27th.
I tried to knock the kernel back down to March 30th version 3.14.0 and I get “Error: Download failed: filesize = 0”.
Updating the kernel to the newest version has fixed nothing…
It seems like this is the same version that I already had.
Does the kernel not update with the svn updates?
i misunderstood. i thought it was working on other computers, as you said you had used it on 40 others. this appears to be a kernel issue, please update your kernel
I have and it passes fine.
I’m getting the same result on every machine I’ve tested. …and ever machine worked fine on 0.33b.
They are all Optiplex 7010 model.
I built this image on these machines…
i suspect it is a hardware issue. have you run a memtest?
Also, all of this text only shows for about 1-2 seconds before restarting. I had to take a video, then pause and screen shot to get the picture to post.