Errory deploying images
-
Hello Tom
I tried the newer kernel and now I have a new message that it hangs on.
“esas2r: driver will not be loaded because no ATT0 esas2r devices were found i2c-parport-ligh: adapter type unspecified”I am getting no other error messages from this now. The machine after hanging at this point for a while will go to the fog stage .
I ran deploy in debug mode and Image4 is what I get after running the fog command.
the machine still does not have an os installed after the machine reboots.Thank you
[url=“/_imported_xf_attachments/0/664_Fog Image4.png?:”]Fog Image4.png[/url]
-
Hello Tom,
An update for my issue I have another machine that has the same error as above however that machine does go through with the image process and loads the image.
If it helps the image I am currently trying to load is windows 8 x86 which was uploaded as Multiply Partition - All Disks.
Also I forgot to mention I am using Fog .32.If you need any more information please let me know.
Thank you
-
Hello Tom,
One more updated. As I was browsing the forums I found the mention of checking your hardware to ensure that it is compatible with Fog and My NIC passes however the hard drive fails. I tried both IDE and ACHI mode for the hard drive and both seem to fail.
[URL=‘http://pcpartpicker.com/part/samsung-internal-hard-drive-mz7pd128z’][FONT=Trebuchet MS][COLOR=#006699][SIZE=12px]Samsung 840 Pro Series 128GB 2.5" Solid State Disk[/SIZE][/COLOR][/FONT][/URL] is the only hard drive that is the machine.What can I do to possible get this working for this machine? or what other info would you need to better help figure out the issue?
Thank you
-
Sounds like you will need to build a kernel for the machine so it recognizes the SSD.
For that you will need to find the actual driver for the SSD and include it in the kernel.
[url]http://fogproject.org/wiki/index.php?title=Building_a_Custom_Kernel[/url]
-
thank you I will give this a try.
-
Hello BPSTravis,
I tried following the instructions given to creating a kernel however when I get to the step to extract I get an error.
stdin: not in gzip formatI am new to using linux so any help in getting past this would be great.
Thank you
-
Can you get me the exact driver needs for this SSD? I know you gave info, but I need a little more.
I’ll build it when I get home.
-
I am not sure if this changes anything however I tried the SSD in a different machine that is working and I was able to successfully deploy a image onto that drive.
As far as driver needs I do not know where to get this info if you give me an idea I can let you know.
Thank you for all the help you have provided as of now.
-
What chipset is on the motherboard the SSD does not work with?
-
Hello,
So after changing the sata operation mode from to Raid it seems to be proceeding with the deploy process. I am sorry I did not try this before I just figured that fog would work with IDE or ACHI mode both which i had tried earlier.Thank you both of you for you help with this issue. although I am still confused why raid mode would work while ide does not.
