FOG install fails / UDPCast...Failed! in Ubuntu 13.10.

Ubuntu_newby · Feb 7, 2014, 7:09 PM

Hi all!

This is my first post in this forum. I’m going to introduce myself first.
I’m new to Linux (well…I tried some linux distributions in the past). I have many experience with Windows (server).
I want to know more about Linux…

This week I have installed Ubuntu 13.1 on a AMD64-bit computer. Ubuntu installs well and works fine for me.

Now I want to install FOG. See the listing below:

–

   ..#######:.    ..,#,..     .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

Created by:

SyperiorSoft

[url]http://www.SyperiorSoft.com[/url]

Developers:

Chuck Syperski

Jian Zhang

GNU GPL Version 3

###########################################

Version: 0.32 Installer/Updater

What version of Linux would you like to run the installtion for?

      1) Redhat Based Linux (Fedora, CentOS)
      2) Ubuntu Based Linux (Kubuntu, Edubuntu)

Choice: [2]

Starting Ubuntu Installtion.

FOG Server installation modes:
* Normal Server: (Choice N)
This is the typical installation type and
will install all FOG components for you on this
machine. Pick this option if you are unsure what to pick.

  * Storage Node: (Choice S)
      This install mode will only install the software required
      to make this server act as a node in a storage group

More information:
[url]http://www.fogproject.org/wiki/index.php?title=InstallationModes[/url]

What type of installation would you like to do? [N]

What is the IP address to be used by this FOG Server? [192.168.1.12]

Would you like to setup a router address for the DHCP server? [Y/n]
What is the IP address to be used for the router on the DHCP server? [192.168.1.10]

Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n]
What is the IP address to be used for DNS on the DHCP server and client boot image? [127.0.1.1] 192.34.4.35

Would you like to change the default network interface from eth0?
If you are not sure, select No. [y/N]

Would you like to use the FOG server for dhcp service? [Y/n] n

DHCP will not be setup but you must setup your
current DHCP server to use FOG for pxe services.

On a Linux DHCP server you must set:
next-server

On a Windows DHCP server you must set:
option 066 & 067

This version of FOG has internationalization support, would
you like to install the additional language packs? [Y/n]

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Fedora, or with sudo on Ubuntu.

Here are the settings FOG will use:
Distro: Ubuntu
Installation Type: Normal Server
Server IP Address: 192.168.1.72
DHCP router Address: 192.168.1.1
DHCP DNS Address: 194.134.5.55
Interface: eth0
Using FOG DHCP: 0
Internationalization: 1

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password. If
you don’t leave it blank you will need to change
it in the config.php file located at:

/var/www/fog/commons/config.php

Press enter to acknowledge this message.

Pakketlijsten worden ingelezen…
Boom van vereisten wordt opgebouwd…
De status informatie wordt gelezen…
mysql-server is reeds de nieuwste versie.
0 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd.

Installing package: mysql-client
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: perl
Installing package: libcrypt-passwdmd5-perl
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext
Installing package: clamav-freshclam
Installing package: language-pack-it
Installing package: language-pack-en
Installing package: language-pack-es
Installing package: language-pack-zh-hans

Confirming package installation.

Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-gd…OK
Checking package: php5-cli…OK
Checking package: php5-mysql…OK
Checking package: php5-curl…OK
Checking package: mysql-server…OK
Checking package: mysql-client…OK
Checking package: tftpd-hpa…OK
Checking package: tftp-hpa…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: sysv-rc-conf…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: build-essential…OK
Checking package: cpp…OK
Checking package: gcc…OK
Checking package: g++…OK
Checking package: m4…OK
Checking package: htmldoc…OK
Checking package: perl…OK
Checking package: libcrypt-passwdmd5-perl…OK
Checking package: lftp…OK
Checking package: openssh-server…OK
Checking package: php-gettext…OK
Checking package: clamav-freshclam…OK
Checking package: language-pack-it…OK
Checking package: language-pack-en…OK
Checking package: language-pack-es…OK
Checking package: language-pack-zh-hans…OK

Configuring services.

Setting up fog user…Exists
Setting up and starting MySql…OK
Backing up user reports…OK
Setting up and starting Apache Web Server…OK
Restoring user reports…OK
Configuring Fresh Clam…OK
Setting up storage…OK
Setting up and starting NFS Server…OK
Setting up and starting DHCP Server…/lib/ubuntu/functions.sh: regel 356: : Bestand of map bestaat niet
…Skipped
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…Failed!

make failed!

–

Here FOG stops as you can see. What can I do next?

I have tried:

sudo apt-get install UDPCast

Runs without error, but when I run “sudo ./installfog.sh” the output above will be the same.

Can anybody help me to run FOG without errors?

Thanks in advance.

Greets, Jos

Jaymes Driver · Feb 7, 2014, 7:15 PM

Welcome to FOG!!! I will paste this information here for you, but the thread can be located here in the future: [url]http://fogproject.org/forum/threads/setting-up-and-building-udpcast-failed.4548[/url]

Log into the FOG Server as root and go to your installation folder.
Something like:
[code]
cd /opt/fog_0.32
[/code]
Then cd into the packages folder

[code]
cd packages
[/code]

Then run these commands:
[code]
wget [URL]https://svn.code.sf.net/p/freeghost/code/trunk/packages/udpcast-20120424.tar.gz[/URL]
rm -f udpcast-20071228.tar.gz
sed -i ‘s/udpcastout=“udpcast-20071228”/udpcastout=“udpcast-20120424”/’ …/lib/common/config.sh
sed -i ‘s/udpcastsrc=“…/packages/udpcast-20071228.tar.gz”/udpcastsrc=“…/packages/udpcast-20120424.tar.gz”/’ …/lib/common/config.sh
cd …/bin
./installfog.sh
[/code]

You MAY want to delete the /opt/fog folder for a clean install. (or rename it)