What do you have FOG running on?
-
9,200 computers? Realy cool!
I’m using FOG on a dedicated Dell 780, 4GB RAM on a 1GB network.
Currently imaging around 200-250 computers. Deployment runs very very fast, it’s running at full network speed without problems and while deploying it’s just using a few 100 mb’s of RAM.Also using the fog user tracker to check how many users are login in/out and checking where pc’s are rarely being used so we can move them to other locations.
-
Just to keep the thread going I’ll add my two bits in…doing a small bench deployment this week on an Optiplex 745 with 2GB ram.
if we switch to FOG we will be using it on about 700 computers. Our old ghost server is a simple Core2 Duo tower that I might use, unless they want to visualize it, though I’d have to look at the pros and cons of that.
-
@matt, I think you mean virtualize
Here are my two cents on physical vs. virtual:In my opinion, most servers should be virtual. I prefer our FOG servers to be virtual in our environments for the following reasons:
- All of our servers are backed up daily, and virtual servers are really just 1 file, the virtual hard disk.
- Real servers are built on much better hardware, i.e. Intel Xeon, redundant power supplies etc - more efficient and better reliability
- If your server is in a data center (depending on the size company) there is a good chance you would be on a 10Gbe backbone, or a trunked 1Gbe connection, whereas on a physical box, you would more than likely be on a 1Gbe at most.
- If you need to beef up a server, it’s as simple as moving a slider or clicking a box in a drop down menu. You don’t physically upgrade anything (assuming you have extra power to tap from your physical server box)
If you want to see the benefits of virtual PC’s I recommend trying VMWare view, or if you are looking for a more server type solution, to look at VMWare ESXi. Both products are free. (There are others out their as well, however, you will find VMWare to be the “industry standard” which is why i’m suggesting these products.)
-
Ha…yes, I meant virtualize. Thanks for the info! Our current ghost server is a minitower PC that sits right next to my office desktop. It was that way when I got here and I never questioned it. It would make sense to have it in our network center and backed up, etc.
-
I also like virtualize, because it saves power/money/enviroment, I run mine from home, so I pay the bills, and it is anywhere from $15-30 a month in power to run a computer/server 24/7. I have 7 virtual computer running on 1 box. that is saving me ~$120 a month just in power.
-
I have Fog virtualized as well, most dynamic imaging software out there.
its on a Dell R710
ESX 4
64gb
2 3.2 GHz six core xeons processors -
I have FOG 0.32 on a VM ESXi 4.0, assigned 1 cpu, 1GB mem and 4GB disk (plus an 15GB images partition),
cpu is intel E2200 dual core (a standard desktop pc).
Host OS is Lubuntu 11.10It is running at home, just testing and learning. At work I’m an Altiris admin, and I’m looking to find all usefull
features in FOG. -
My FOG server is in a Microsoft Hyper-V session on a IBM x3560. Hyper-V session is running Ubuntu 11.10 and running FOG version 0.32.
Host Server Specs:
2x 8core Xeon processor @ 2.25 ghz
14GB RAM
Boot HDD - 2x 72GB mirrored
Data HDD - 12x 1TB, RAID 5 and formatted = 10TB usable space.
23-slot LTO4 backup tape loader
Windows Server 2008 R2 SP1 x64 -
current server spec is:
fog 0.32, kernel 3.2.4, ubuntu server 10.04
Intel
Core
2 Duo CPU E6750 @ 2.66GHz, 2 cores
2gb ram
1TB HDnetwork is cisco 100mg to desktop, FOG multicasting across two Vlans, also used to auto-join domain, and looking to test package deployments.
unicast speeds of 1.25gb/min :: multicast speed around 670mb/min
-
Current server spec is:
fog 0.32, kernel 3.2.4, Centos 6
Intel Pentium D CPU 3.4Ghz
4gb ram
1TB HD100mb to desktop, Server is on a GB switch
unicast speeds of 1.25gb/min :: multicast speed around 670mb/min
-
HP Microserver N40L running Ubuntu 10.04 LTS with a pair of 1Tb hdd’s in raid1 for image storage. Isolated network running into a cheap Netgear Gbe switch to unicast to 10 machines at a time.
I look after around 3000 x Panasonic Toughbooks which have a hard life out with Field based workers so the HDD sector scan function comes in very handy.
Cheers
Robin -
Was VM on esxi in an intel blade server setup but the FOG server was running into resource issues when imaging multiple computers. Started out great, but would stall at 200 MiB/min when imaging lately.
Now it’s on a Dell PowerEdge 2600 with 2 x 2.4 Ghz Dual Core Xeons, 8GB RAM, and 6x73GB 10k drives in raid 5. Ubuntu 10.04 LTS, with LTSP enhancements for ProxyDHCP functionality.
I also moved the server from the main switch which also had the rest of the servers and stuff, to a decidated switch in my workroom. Now I can image laptops and desktops that are in for service without impacting the rest of the network. 3.2 GiB/min with the new setup.
We’re a school, so the workload is usually 1 to 10 computers images per week, except in July/August when we image every laptop and desktop in the district, which is now up to 800 computers.
-
fog 0.32, Fedora 16
Dell PowerEdge 2800
2x 3.0GHz Dual Core Xenon
4GB RAM
4x 73GB 10,000rpm HDDs in RAID 5Network is mostly 10/100 with select switches slowly being upgraded to 10/100/1000 to match the backbone.
99% of workstations are running Windows XP (remainder is Windows 7)
Currently have about 500 machines used with FOG and a couple hundred that I still rely on ghost to image until I get around to building a custom kernel with all of the appropriate drivers.
-
In the college I work at I’m a network technician in one department and network administrator and only technician in a smaller department, the latter of which has virtually no budget, so I have to scrimp and scrape what I can together and any server hardware is donated from the main department I work in. Consequently I came across fog about 4 months back. I previously used DRBL server with clonezilla to image the 34 machines for our Cisco academy network but switched to fog 0.32 before the summer. The no budget aspect means the most powerful machine I could have is a core i5 2500 quad core, 16GB ram, with 3x 1TB drives in RAID5 setup.
Software wise the host OS is Slackware 13.37 x64 and I’m running Virtualbox 4.1 to host 4 virtual PCs. I wasn’t really sure that Virtualbox was up to the job of running a fog server before the summer but after extensive testing under loads it can quite comfortably support my Ubuntu Server 10.04 / fog 0.32 setup.
I just thought I’d add my 2 pennies (2 cents as the Americans say) worth as I’ve not seen many people using Virtualbox to host things like this. I’m very comfortable relying on it though for the conditions I work in with this smaller network.
Anyone else using fog on Virtualbox?? I’d love some feedback on your experiences.
-
[quote=“Matt Harding, post: 8683, member: 1207”]In the college I work at I’m a network technician in one department and network administrator and only technician in a smaller department, the latter of which has virtually no budget, so I have to scrimp and scrape what I can together and any server hardware is donated from the main department I work in. Consequently I came across fog about 4 months back. I previously used DRBL server with clonezilla to image the 34 machines for our Cisco academy network but switched to fog 0.32 before the summer. The no budget aspect means the most powerful machine I could have is a core i5 2500 quad core, 16GB ram, with 3x 1TB drives in RAID5 setup.
Software wise the host OS is Slackware 13.37 x64 and I’m running Virtualbox 4.1 to host 4 virtual PCs. I wasn’t really sure that Virtualbox was up to the job of running a fog server before the summer but after extensive testing under loads it can quite comfortably support my Ubuntu Server 10.04 / fog 0.32 setup.
I just thought I’d add my 2 pennies (2 cents as the Americans say) worth as I’ve not seen many people using Virtualbox to host things like this. I’m very comfortable relying on it though for the conditions I work in with this smaller network.
Anyone else using fog on Virtualbox?? I’d love some feedback on your experiences.[/quote]
this is good to know, i have thought about putting FOG in virtualbox on a server
-
Running on a little HP ML110 with Ubuntu 10.04 LTS. So far I think we have imaged around 200 of 1200 machines in a standalone environment. We arent currently using most of the features but this server has helped us greatly with deployments.
-
Ubuntu 10.10 desktop 64bit 8 gigs of ram and bonded 1 gig nics in a VmWare environment. Managing our three building main campus and 26 branch locations. Storage nodes at each location that provide PXE boot and Samba share for snapins. It’s a complete hands off setup. Our helpdesk can image and deploy software to any computer without having to go to the location. All thanks to the FOG team here this is the best solution with great support.
-
My Fog-Machine is running Ubuntu 10.10 on a Dell Poweredge 1650 4GB RAM. (also have VM image in case this physical server dies.)
The storage node is an Iomega 14TB StorCenter px6-300d.It works quite well for our environment, where we only need images 1-2 times a year because nothing really changes as far as configuration. (We image everything from workstations to AGFA printers the size of a VW bus.)
-
My FOG server is running on virtualized Ubuntu 12.04, ESXi on a Dell PowerEdge M610. Works great – the only bottlenecks I ever run into is related to our limited network bandwidth, not FOG resource usage.
-
Sun Microsystem Server old V40z OS=Cento 6.3
Great still working on some problems but for the most part it is greatThank you guys
