Drm_kms_helper panic occurred switching back to text console

[Tom Elliott]

Can you try my kernel?

[url]https://mastacontrola.com/fogboot/kernel/bzImage[/url]

[Jimmy Hansen]

Just replace the one in /tftpboot/fog/kernel with the one that one.?

[Tom Elliott]

Well, yes, but save your original “just in case”.

[code]mv /tftpboot/fog/kernel/bzImage /tftpboot/fog/kernel/bzImage.5FEB2014
wget --no-check-certificate https://mastacontrola.com/fogboot/kernel/bzImage -O /tftpboot/fog/kernel/bzImage[/code]

[Jimmy Hansen]

esas2r: driver will not be loaded because no ATTO edsd2r device were found
i2c-parport-light: adapter type unspecified
Kernel panic - not syncing : vfs: unable to mount root fs on unkown-block(1.0)

[Tom Elliott]

Can you try to redownload the init.gz file?

You can even try my 0.32 init.gz if you want.

[code]mv /tftpboot/fog/images/init.gz /tftpboot/fog/images/init.gz.NOT_WORKING
wget --no-check-certificate https://mastacontrola.com/fogboot/images/init_0.32.gz -O /tftpboot/fog/images/init.gz[/code]

Then try again.

[Jimmy Hansen]

same error message again.

esas2r: driver will not be loaded because no ATTO edsd2r device were found
i2c-parport-light: adapter type unspecified
Kernel panic - not syncing : vfs: unable to mount root fs on unkown-block(1.0)

[Tom Elliott]

The only thing I can think of is that your microsoft azure system has some weird setup. It can’t load the root fs in the proper location.

[Jimmy Hansen]

That was my fear too.

Thanks a million for trying anyway

/Jimmy

[Jimmy Hansen]

If anyone should stumple upon this thread i will give my solution here

firewall

i had forgotten to open transfer ports, after opening those ports it srpung to life
and uploaded my image

/Jimmy

[Jaymes Driver]

Thank for letting us know where the issue was! I haven’t worked with Azure, so I am sorry I couldn’t be of assistance.