Fog issues with DELL Optiplex 3020
-
Hi Tom,
I have the same issue with the Dell 3020’s.
I am unable to access the root password. I have upgraded the kernel to 3.8.8 Core. But am still getting an error. Any recommendations on getting by the root password to upgrade the Kernel?[ATTACH=full]559[/ATTACH][ATTACH=full]560[/ATTACH][url=“/_imported_xf_attachments/0/559_photo 1.JPG?:”]photo 1.JPG[/url][url=“/_imported_xf_attachments/0/560_photo 2.JPG?:”]photo 2.JPG[/url]
-
You need to either change the image type from (Single Disk-Resizable) to Multi-Part (All or Single Disk) or recreate the “golden” system from scratch.
Your issue is not a kernel, or root password error specifically.
-
Thank you Tom, that did it. We have lift off.
I’m glad I didn’t have to recreate the “golden” system from scatch.
You’re the man! -
.
-
I am having an issue with the dell opt 3020 as well. After I select full inventory of the opt 3020 the screens goes blank and I cant see any text after that or see when I can type in the pc’s name and hit enter to continue with the registration process. What I do is wait a few minutes and type in my pc name and hit enter 8 or 9 times and then the registration process starts but I am doing this blind because you cant see anything. Also when I am downloading an image the opt 3020 the screen will go blank and I can not see the process of the image. any ideas?
-
Try my kernel, but download the 32 bit
[url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url]
-
ok thanks I will try it
-
Hey Tom that worked thank you! You are the man!
-
Second that - you’re the man Tom. Your kernel worked perfectly on a new batch of OptiPlex 3020s
-
Hey Richard, what Bios version were you on the 3020’s we are having issue with these over here too. Using 0.32 with 3.8.8 core. Will try the [url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url]
-
Jaymes/Tom,
I’m also having troubles with an Optiplex 3020 on fog 0.32. I have the new kernels from Tom’s site but it didnt seem to make a difference. This is what I’m getting when I attempt to upload an image or when I choose “Client System Information” from the fog pxe boot menu:
-
What kernel did you download, and how did you save it to your system?
Are you sure you’re loading MY kernel? When you copied the file, what command did you use?
-
[quote=“Tom Elliott, post: 25279, member: 7271”]What kernel did you download, and how did you save it to your system?
Are you sure you’re loading MY kernel? When you copied the file, what command did you use?[/quote]
Edit: it’s working now, thanks!!!
[url=“/_imported_xf_attachments/0/663_kerneldl.jpg?:”]kerneldl.jpg[/url]
-
I am seeing the same errors as DLC with Tom’s image. What BIOS version is everyone using?
-
Cody,
DLC writes that when he followed the instructions properly, all was working finally.
Please see the FAQ link in the signature as it should help you out if done properly.
-
But FAQs are hard.
-
Tom,
Copied the commands directly from the WIKI and still getting Kernel Panic errors.
Thanks,
Cody -
Tom I used everything you said to do with new kernel & I am running .32 still & it worked on a 3020. It takes a little bit longer for it to start to register, but that’s better than nothing! Thanks!
-
Hello, I have a problem with a drive dell optiplex 3020. not start.The red LED on the motherboard lit but when I press the power button does nothing. Can you help me please ?
-
[quote=“alainstar, post: 35251, member: 25610”]Hello, I have a problem with a drive dell optiplex 3020. not start.The red LED on the motherboard lit but when I press the power button does nothing. Can you help me please ?[/quote]
This sounds more like an issue with your motherboard, not an issue FOG or any of us here on the forums could help you with.
