If anyone has any thoughts on how to troubleshoot this error I would appreciate it. I would like to avoid a complete reinstall if possible.

My first attempt to download an image after updating to 1.2.0

Unable to mount fogIP:images on /images: [B]protocol not supported[/B]

Wasn’t able to find that protocol error by searching the forum. Does anyone have any ideas?

The basic commands for uninstalling apache2 didn’t work so this is what I ended up on

sudo apt-get --purge remove apache2 apache2.2-common
sudo apt-get --purge remove apache2.2-common
sudo apt-get install apache2 apache2-mpm-prefork apache2.2-common libapache2-mod-php5 php5

After doing that it was back to 0.32, so I ran the fog installer again and it worked without error, now on 1.2 with database and images intact! Hurray!

OS was already installed and running 0.32, is there a command I can run to re-install apache?

Same problem for all browsers. Here is the log file as requested

Script started on Wed 08 Oct 2014 09:59:02 AM CDT
Ubuntu

   ..#######:.    ..,#,..     .::##::.    

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

[url]http://www.fogproject.org/[/url]

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################

Version: 1.2.0 Installer/Updater

• Found FOG Settings from previous install at: /opt/fog/.fogsettings
• Performing upgrade using these settings…

Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

Would you like to donate computer resources to the FOG Project
to mine cryptocurrency? This will only take place during active
tasks and should NOT have any impact on performance of your
imaging or other tasks. The currency will be used to pay for
FOG Project expenses and to support the core developers working
on the project. For more information see:

[url]http://fogproject.org/?q=cryptocurrency[/url]

Would you like to donate computer resources to the FOG Project? [y/N] n

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 10.26.3.9
DHCP router Address: 10.26.1.1
DHCP DNS Address: 10.26.1.15
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

     DHCP will NOT be setup but you must setup your 
     current DHCP server to use FOG for PXE services. 

     On a Linux DHCP server you must set: 
         next-server 

     On a Windows DHCP server you must set: 
         option 066 & 067 

       Option 066 is the IP of the FOG Server: (e.g. 10.26.3.9) 
       Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe) 

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

• Preparing apt-get

• Installing package: apache2

• Installing package: php5

• Installing package: php5-json

• Installing package: php5-gd

• Installing package: php5-cli

• Installing package: php5-mysql

• Installing package: php5-curl

• Installing package: mysql-server

  We are about to install MySQL Server on
  this server, if MySQL isn’t installed already
  you will be prompted for a root password.

  Press enter to acknowledge this message.

Reading package lists…
Building dependency tree…
Reading state information…
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-21
Use ‘apt-get autoremove’ to remove them.
The following packages will be upgraded:
mysql-server
1 upgraded, 0 newly installed, 0 to remove and 245 not upgraded.
Need to get 68.8kB of archives.
After this operation, 12.3kB disk space will be freed.
Get:1 [url]http://us.archive.ubuntu.com/ubuntu/[/url] lucid-updates/main mysql-server 5.1.73-0ubuntu0.10.04.1 [68.8kB]
Fetched 68.8kB in 1s (63.2kB/s)
(Reading database … (Reading database … 5% (Reading database … 10% (Reading database … 15% (Reading database … 20% (Reading database … 25% (Reading database … 30% (Reading database … 35% (Reading database … 40% (Reading database … 45% (Reading database … 50% (Reading database … 55% (Reading database … 60% (Reading database … 65% (Reading database … 70% (Reading database … 75% (Reading database … 80% (Reading database … 85% (Reading database … 90% (Reading database … 95% (Reading database … 100% (Reading database … 222310 files and directories currently installed.)
Preparing to replace mysql-server 5.1.62-0ubuntu0.10.04.1 (using …/mysql-server_5.1.73-0ubuntu0.10.04.1_all.deb) …
Unpacking replacement mysql-server …
Setting up mysql-server (5.1.73-0ubuntu0.10.04.1) …

• Installing package: mysql-client
• Installing package: tftpd-hpa
• Installing package: tftp-hpa
• Installing package: nfs-kernel-server
• Installing package: vsftpd
• Installing package: net-tools
• Installing package: wget
• Installing package: xinetd
• Installing package: sysv-rc-conf
• Installing package: tar
• Installing package: gzip
• Installing package: build-essential
• Installing package: cpp
• Installing package: gcc
• Installing package: g++
• Installing package: m4
• Installing package: htmldoc
• Installing package: lftp
• Installing package: openssh-server
• Installing package: php-gettext
• Installing package: clamav-freshclam

Confirming package installation.

• Checking package: apache2…OK
• Checking package: php5…OK
• Checking package: php5-json…OK
• Checking package: php5-gd…OK
• Checking package: php5-cli…OK
• Checking package: php5-mysql…OK
• Checking package: php5-curl…OK
• Checking package: mysql-server…OK
• Checking package: mysql-client…OK
• Checking package: tftpd-hpa…OK
• Checking package: tftp-hpa…OK
• Checking package: nfs-kernel-server…OK
• Checking package: vsftpd…OK
• Checking package: net-tools…OK
• Checking package: wget…OK
• Checking package: xinetd…OK
• Checking package: sysv-rc-conf…OK
• Checking package: tar…OK
• Checking package: gzip…OK
• Checking package: build-essential…OK
• Checking package: cpp…OK
• Checking package: gcc…OK
• Checking package: g++…OK
• Checking package: m4…OK
• Checking package: htmldoc…OK
• Checking package: lftp…OK
• Checking package: openssh-server…OK
• Checking package: php-gettext…OK
• Checking package: clamav-freshclam…OK

Configuring services.

• Setting up and starting MySql…OK
• Backing up user reports…OK
• Setting up and starting Apache Web Server…Failed!

Script done on Wed 08 Oct 2014 10:10:01 AM CDT

Page cannot be displayed, seems like a generic 404

Hello,

Update from 0.32 to 1.2 seemed to go fine, the installer didn’t report any problems. After completing the update and rebooting the ubuntu server, the fog web interface does not load. Any advice you can offer is greatly appreciated. Thanks!

[quote=“Tom Elliott, post: 25279, member: 7271”]What kernel did you download, and how did you save it to your system?

Are you sure you’re loading MY kernel? When you copied the file, what command did you use?[/quote]

Edit: it’s working now, thanks!!!

[url=“/_imported_xf_attachments/0/663_kerneldl.jpg?:”]kerneldl.jpg[/url]

Jaymes/Tom,

I’m also having troubles with an Optiplex 3020 on fog 0.32. I have the new kernels from Tom’s site but it didnt seem to make a difference. This is what I’m getting when I attempt to upload an image or when I choose “Client System Information” from the fog pxe boot menu:

[IMG]http://i.imgur.com/8r2nTJK.jpg[/IMG]