TFTPboot restart problems
-
I’ve looked into this in the past, it happens a lot with 960’s, and it appears to be related to the way the kernel goes through the shutdown process. [url]http://linux.koolsolutions.com/2009/08/04/howto-fix-linux-hangfreeze-during-reboots-and-restarts/[/url] seems to be related, though I haven’t had a consistent set of results on the same model of optiplex, so I stopped trying to figure it out for now.
-
Time to fire up DCCU and see if that fixes the issue
-
I doubt it’s a BIOS related problem, because while using FOG 0.29 the problem didn’t occur.
I updated to 0.32 yesterday, that’s when the problem with the Optiplex 780 started…[S]Will try to update to the latest BIOS though, just to be sure…[/S]
edit: updated the BIOS to version A12 (latest available BIOS) but the problem still occurs
-
[S]I seem to have found the problem: a BIOS setting combinated with the new fog version causes the problem.[/S]
[S]SATA operation was set to “raid on”. Switching this option to any other option seems to correct the problem.[/S]Unfortunately, that doesn’t do it. Sometimes it reboots, and sometimes it doesn’t…
-
I’m unable to even get a 780 to upload image…tried the 2.6.35.7 KS Kernel and still nothing . I also saw a solution to change to legacy in BIOS for HD from SATA-RAID . Just can’t seem to get a 780 to upload an image . Imaged up and down on a 790 without issue . The 780 in question is a 250gb , single partition drive . It has about 85gb used on the Drive at the moment . I’m stuck .
-
We currently image our 780’s with the hard drives set to ATA mode using the default kernel that .32 installed with and haven’t had any problems with uploading an image.
-
Hi guys,
Major breakthrough here for the problem with the Dell Optiplex 780.
While using the kernel with id 1037 the problem seems to disappear.
I’ve set the kernel setting per host on all my 780’s so that it doesn’t affect other pc’s.Problem solved (for now?)!
-
Markverg, have you tested this anymore? Is Kernel 2.6.33.3 (1037) still working well for your 780’s and having them restart?
-
Kevin, we’ve been running that kernel (1037) since feb 7th only for the 780’s and the problem seems to be solved!
-
[quote=“Markverg, post: 2290, member: 383”]Kevin, we’ve been running that kernel (1037) since feb 7th only for the 780’s and the problem seems to be solved![/quote]
Would you mind posting the steps you took to do this? I remember seeing how to do it a while ago but I’m in a pinch with a similar problem (Dell 960’s) and I would like to try using a different kernel.
Edit - Nevermind, I found a link in another post that points out how to do this: [url]http://community.spiceworks.com/how_to/show/2338[/url]